B&R 80MPF3.500D114-01
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Stepper motors with incremental encoder and brake IP65 |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
| Weight | 1280 kg |
Shipping & availability
When can 80MPF3.500D114-01 be shipped?
80MPF3.500D114-01 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 80MPF3.500D114-01 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 80MPF3.500D114-01 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 80MPF3.500D114-01, subject to availability and destination.
2-phase hybrid stepper motor, 60 mm flange, length 153.1 mm, ABR 24 VDC, 5 A parallel, brake 2 Nm, 1.7 Nm holding torque, 1.2 Nm stall torque
Specifications
Specifications
| Stepper motor | Stepper motor flange size 60 mm, length 153.1 mm, incremental encoder and brake |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Not applicable |
| wiring | Parallel |
| Current | 5 A |
| Resistance/Phase | 0.38 Ω |
| Inductance/Phase | 1.4 mH |
| Stall torque | 1.2 Nm |
| Holding torque | 1.7 Nm |
| Detent torque | <45 mNm |
| Rotor inertia | 440 gcm2 |
| Stepping angle | 1.8° |
| Max. surface temperature | 90°C |
| Average period of operation between failures | 21,000 hours |
| Shaft type | Flat-sided shaft (D-cut) |
| Insulation class | B (130°C) |
| Insulation resistance | 100 MΩ min. 500 VDC |
| Dielectric resistance | 500 VAC for 1 minute |
| Driver supply voltage | Max. 80 VDC |
| Degree of protection per EN 60529 | IP65 |
| Operation | 5 to 95%, non-condensing |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Number of outputs | 3A / B / R |
| Resolution | 1024 increments per revolution |
| Output circuit | Push/Pull level, asymmetrical |
| Output protection | Protection against short circuit |
| Current consumption | Max. 12 mA + Output load |
| Supply voltage | 24 VDC +6%/-10% |
| Max. output current | ±10 mA per output |
| Braking torque | 2 Nm / 1.5 Nm / 1.8 Nm |
| Coil resistance | 52.36 Ω ±7% |
| Inductance | 0.7 H |
| Power consumption | Typ. 11 W |
| Connection time | 6 ms |
| Response delay | 2 ms |
| Cutoff time | 25 ms |
| Max. radial load | 75 N |
| Max. axial load | The permissible axial load is not permitted to be greater than the motor mass. |
| Weight | 1,280 g |
| Length | 153.1 mm |
More B&R parts
UsedB&R 5C5001.01 IPC 5000 5D5500.06 Used
UsedB&R 5PC720.1505-K07 - 5P62:0A-03 Used