.svg&w=240){kind=small}
B&R 80MPH1.300D114-01
2-phase hybrid stepper motor, 87.1 mm flange
- MPN
- 80MPH1.300D114-01
Price and lead time confirmed within 1 business day
Request a Quote
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- Ships via
- 100% positive eBay feedback
What is the B&R 80MPH1.300D114-01?
2-phase hybrid stepper motor, 87.1 mm flange, length 172.5 mm, ABR 24 VDC, 3 A series, brake 9 Nm, 4.0 Nm holding torque, 2.9 Nm stall torque
Specifications
Short description
| Stepper motor | Stepper motor flange size 87.1 mm, length 172.5 mm, incremental encoder and brake |
General information
| Certifications – CE | Yes |
| Certifications – UKCA | Yes |
| Certifications – CRA (Cyber Resilience Act) | Not applicable |
| Certifications – UL | cURus E360421; Servo and stepper motors - Component |
Specific motor data
| Wiring | Serial |
| Current | 3 A |
| Resistance/Phase | 1.7 Ω |
| Inductance/Phase | 12.9 mH |
| Stall torque | 2.9 Nm |
| Holding torque | 4.0 Nm |
| Detent torque | <160 mNm |
| Rotor inertia | Approx. 1.31 kgcm 2 |
General motor data
| Stepping angle | 1.8° |
| Max. surface temperature | 85°C |
| Average period of operation between failures | 20,000 hours |
| Shaft type | With key |
| Insulation class | B (130°C) |
| Insulation resistance | 100 MΩ min. 500 VDC |
| Dielectric resistance | 1776 VAC for 1 minute |
| Driver supply voltage | Max. 80 VDC |
Operating conditions
| Degree of protection per EN 60529 | IP65 (note: From back of flange) |
Ambient conditions
| Temperature – Operation | -20 to 40°C |
| Temperature – Storage | -30 to 85°C |
| Temperature – Transport | -30 to 85°C |
| Relative humidity – Operation | 5 to 95%, non-condensing |
| Relative humidity – Storage | 5 to 95%, non-condensing |
| Relative humidity – Transport | 5 to 95%, non-condensing |
Electrical properties - Encoder
| Number of outputs | 3; A / B / R |
| Resolution | 1024 increments per revolution |
| Output circuit | Push/Pull level, asymmetrical |
| Output protection | Protection against short circuit |
| Current consumption | Max. 12 mA + Output load |
| Supply voltage | 18 to 30 VDC |
| Max. output current | ±10 mA per output |
Electrical properties - Brake
| Supply voltage | 24 VDC +6%/-10% |
| Braking torque | 9 Nm / 7.5 Nm / 8.0 Nm (note: Braking torque M 2N / Mean dynamic braking torque 20°C / M stat. at 100°C) |
| Coil resistance | 32.00 Ω ±7% |
| Inductance | 0.83 h |
| Power consumption | Typ. 18 W |
| Connection time | 7 ms (note: Time from switching off the current until the nominal torque is reached) |
| Response delay | 2 ms (note: Time from switching off the current until the torque increases) |
| Cutoff time | 40 ms (note: Time from switching on the current until the torque begins decreasing) |
Mechanical properties
| Max. radial load | 290 N (note: Measured in the middle of the shaft) |
| Max. axial load | 225 N |
| Weight | 2,500 g |
| Length | 172.5 mm |
Accessories
Optional accessories (17)
| 80XMPXAC1.00-10 | Accessories — Gaskets for IP65 stepper motors for use with 80CMxxxxx.26-01 cables, 10 units per package |
| 80XMPXAC0.00-02 | Accessories — Accessory set for stepper motors with encoder and brake, 8-pin, 4-pin and 2-pin connector and crimp contacts |
| 80CM20003.25-01 | Incremental encoder cables — Incremental encoder cable, length 20 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side… |
| 80CM15003.25-01 | Incremental encoder cables — Incremental encoder cable, length 15 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side… |
| 80CM10003.25-01 | Incremental encoder cables — Incremental encoder cable, length 10 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side… |
| 80CM07503.25-01 | Incremental encoder cables — Incremental encoder cable, length 7.5 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive sid… |
| 80CM05003.25-01 | Incremental encoder cables — Incremental encoder cable, length 5 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side,… |
| 80CM03003.25-01 | Incremental encoder cables — Incremental encoder cable, length 3 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side,… |
| 80CM02003.25-01 | Incremental encoder cables — Incremental encoder cable, length 2 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side,… |
| 80CM01003.25-01 | Incremental encoder cables — Incremental encoder cable, length 1 m, 4x 0.14 mm², 2x 0.35 mm², 8-pin connector on the motor side, 9-pin DSUB connector on the drive side,… |
| 80CM20002.21-01 | Motor cables with brake — Motor cable, length 20 m, 5x 0.75 mm², 2x 0.5 mm², for stepper motors with brake, 4-pin and 2-pin connectors on the motor side, can be used… |
| 80CM15002.21-01 | Motor cables with brake — Motor cable, length 15 m, 5x 0.75 mm², 2x 0.5 mm², for stepper motors with brake, 4-pin and 2-pin connectors on the motor side, can be used… |
| 80CM10002.21-01 | Motor cables with brake — Motor cable, length 10 m, 5x 0.75 mm², 2x 0.5 mm², for stepper motors with brake, 4-pin and 2-pin connectors on the motor side, can be used… |
| 80CM05002.21-01 | Motor cables with brake — Motor cable, length 5 m, 5x 0.75 mm², 2x 0.5 mm², for stepper motors with brake, 4-pin and 2-pin connectors on the motor side, can be used… |
| 80CM03002.21-01 | Motor cables with brake — Motor cable, length 3 m, 5x 0.75 mm², 2x 0.5 mm², for stepper motors with brake, 4-pin and 2-pin connectors on the motor side, can be used… |
| 80CM02002.21-01 | Motor cables with brake — Motor cable, length 2 m, 5x 0.75 mm², 2x 0.5 mm², for stepper motors with brake, 4-pin and 2-pin connectors on the motor side, can be used… |
| 80CM01002.21-01 | Motor cables with brake — Motor cable, length 1 m, 5x 0.75 mm², 2x 0.5 mm², for stepper motors with brake, 4-pin and 2-pin connectors on the motor side, can be used… |
Downloads & documentation
Official documents from B&R, downloaded directly from the manufacturer.
Data sheets & manuals
80MPH1.300D114-01: frequently asked questions
When can 80MPH1.300D114-01 be shipped?
80MPH1.300D114-01 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 80MPH1.300D114-01 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 80MPH1.300D114-01 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 80MPH1.300D114-01, subject to availability and destination.
More B&R parts
B&R 80MPH1.300D114-01Price and lead time confirmed within 1 business day
Request a Quote