Mitsubishi Electric FX3U-4DA

Mitsubishi MELSEC iQ-F Series Analog input/output module

MPN
FX3U-4DA
Price and lead time confirmed within 1 business day
Request a Quote
  1. 1We check stock, condition and lead time
  2. 2You get a written quote by email
  3. 3Approve it and we ship — in-stock parts within 1 business day

A real person replies, typically within 1 business day — see our privacy policy.

  • 12-month warranty (new) · 3-month (used/refurbished)
  • 30-day returns, no restocking fee on unused parts
  • 100% positive eBay feedback
  • Ships via

Have spare Mitsubishi Electric (Factory Automation) parts? We buy surplus →

What is the Mitsubishi Electric FX3U-4DA?

The Mitsubishi Electric FX3U-4DA is a analog input/output module in the MELSEC iQ-F Series. Analog output: 4 ch. Mitsubishi Electric has announced its discontinuation (2028/03 To be end of order) — plan spares now; PartnerPLC also sources it on the surplus market after the end of order. Specifications and manuals below are Mitsubishi Electric's own data.

Specifications

Product

SeriesMELSEC iQ-F Series
CategoryAnalog input/output module
Sales status2028/03 To be end of order (Mitsubishi Electric)
OutlineAnalog output: 4 ch

Specifications

Applicable PLCFX5U, FX5UC, FX3U (Ver.2.20 or later), FX3UC(FX3UC-32MT-LT is Ver.1.30 or later) [Connecting to the FX5U, FX5UC CPU module] FX5-CNV-BUS or FX5-CNV-BUSC is required to connect to the FX5U/FX5UC CPU module. Select one of the modules according to the system configuration. [Connecting to the connector-type PLC] The FX2NC-CNV-IF or FX3UC-1PS-5V is required to connect the FX3UC.
Number of occupied I/O points8 points (Taken from either the input or output points of the PLC.)
Mass (weight)0.2 kg
Analog output: Analog output range: Voltage output-10 V to +10 V DC (External load resistance: 1 k to 1 MΩ)
Analog output: Analog output range: Current output0 mA to 20 mA DC, 4 mA to 20 mA DC, (External load resistance: 500 Ω or less)
Analog output: No. of output channels4 channels
Analog output: Output characteristicsThe output mode (voltage/current output) can be set for each channel.
Analog output: Digital input: Voltage output15 bits binary + sign 1 bit
Analog output: Digital input: Current output15bits binary (without the sign)
Analog output: Resolution: Voltage output0.32 mV (20 V × 1/64000)
Analog output: Resolution: Current output0.63 μA (20 mA × 1/32000)
Analog output: Total accuracy: Voltage outputAmbient temperature: 25°C±5°C ±0.3% (±60 mV) for 20 V full scale Ambient temperature: 0°C to 55°C ±0.5% (±100 mV) for 20 V full scale
Analog output: Total accuracy: Current outputAmbient temperature: 25°C±5°C ±0.3% (±60 μA) for 20 mA full scale Ambient temperature: 0°C to 55°C ±0.5% (±100 μA) for 20 mA full scale
Analog output: Time required for D/A conversion1 ms (The number of selected channels will not affect this value.)
Analog output: Isolation method・The photocoupler is used to insulate the analog output area from the PLC. ・The DC/DC converter is used to insulate the analog output area from the power supply unit. ・Channels are not insulated from each other.

Power supply specifications

Power supply5 V DC 120 mA (internal power supply from PLC main unit) 24 V DC ±10% 160 mA (External power supply)

Specifications

Ambient temperature0 to 55°C (32 to 131 °F) when operating and -25 to 75°C (-13 to 167 °F) when stored
Ambient humidity5 to 95%RH (no condensation) when operating
Vibration resistance: Installed on DIN rail: Frequency: 10 to 57 HzHalf amplitude: 0.035 mm Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Vibration resistance: Installed on DIN rail: Frequency: 57 to 150 HzAcceleration: 4.9 m/s 2 Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Vibration resistance: Direct installing: Frequency: 10 to 57 HzHalf amplitude: 0.075 mm Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Vibration resistance: Direct installing: Frequency: 57 to 150 HzAcceleration: 9.8 m/s 2 Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Shock resistance147 m/s 2 Acceleration, Action time: 11 ms, 3 times by half-sine pulse in each direction X, Y, and Z
Noise resistanceBy noise simulator at noise voltage of 1,000 Vp-p, noise width of 1 μs, rise time of 1 ns and period of 30 to 100 Hz
Dielectric withstand voltageBetween batch of all terminals and ground terminal: 500 V AC for 1 min
Insulation resistanceBetween batch of all terminals and ground terminal: 5 MΩ or higher by 500 V DC insulation resistance tester
GroundingClass D grounding (grounding resistance: 100 Ω or less) (Common grounding with a heavy electrical system is not allowed) Ground the PLC independently or jointly.
Working atmosphereFree from corrosive or flammable gas and excessive conductive dusts
Working altitude2000 m or less Do not use the PLC under pressure higher than the atmospheric pressure. Doing so may damage the PLC.

Downloads & documentation

Official documents from Mitsubishi Electric (Factory Automation), downloaded directly from the manufacturer.

Data sheets & manuals

FX3U-4DA: frequently asked questions

When can FX3U-4DA be shipped?

FX3U-4DA is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up FX3U-4DA in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for FX3U-4DA and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for FX3U-4DA, subject to availability and destination.

More Mitsubishi Electric (Factory Automation) parts

Mitsubishi Electric FX3U-4AD-ADP – Mitsubishi MELSEC-F (FX) Series Analog
Mitsubishi Electric
FX3U-4AD-ADP

Mitsubishi MELSEC-F (FX) Series Analog

Mitsubishi Electric FX3U-4AD-PT-ADP – Mitsubishi MELSEC-F (FX) Series Analog
Mitsubishi Electric
FX3U-4AD-PT-ADP

Mitsubishi MELSEC-F (FX) Series Analog

Mitsubishi Electric FX3U-4AD-PTW-ADP – Mitsubishi MELSEC-F (FX) Series Analog
Mitsubishi Electric
FX3U-4AD-PTW-ADP

Mitsubishi MELSEC-F (FX) Series Analog

Mitsubishi Electric FX3U-4AD-TC-ADP – Mitsubishi MELSEC-F (FX) Series Analog
Mitsubishi Electric
FX3U-4AD-TC-ADP

Mitsubishi MELSEC-F (FX) Series Analog

Mitsubishi Electric FX3U-4DA-ADP – Mitsubishi MELSEC-F (FX) Series Analog
Mitsubishi Electric
FX3U-4DA-ADP

Mitsubishi MELSEC-F (FX) Series Analog

Mitsubishi Electric FX3U-4HSX-ADP – Mitsubishi MELSEC-F (FX) Series High-speed counter
Mitsubishi Electric
FX3U-4HSX-ADP

Mitsubishi MELSEC-F (FX) Series High-speed counter

Mitsubishi Electric FX3U-4LC – Mitsubishi MELSEC iQ-F Series Analog input/output module
Mitsubishi Electric
FX3U-4LC

Mitsubishi MELSEC iQ-F Series Analog input/output module

Mitsubishi Electric FX3U-64CCL – Mitsubishi MELSEC iQ-F Series Network/communication module
Mitsubishi Electric
FX3U-64CCL

Mitsubishi MELSEC iQ-F Series Network/communication module

Mitsubishi Electric FX3U-4DAPrice and lead time confirmed within 1 business day
Request a Quote