FX3U-64CCL Mitsubishi MELSEC iQ-F Series Network/communication module

MPN: FX3U-64CCL · Brand: Mitsubishi Electric (Factory Automation)

Price on request

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	Mitsubishi MELSEC iQ-F Series – Network/Communication Module
Lifecycle	Active mature
Warranty	12-month (new) · 3-month (used/refurbished)

Shipping & availability

When can FX3U-64CCL be shipped?

FX3U-64CCL is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up FX3U-64CCL in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for FX3U-64CCL and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for FX3U-64CCL, subject to availability and destination.

The Mitsubishi Electric FX3U-64CCL is a network/communication module in the MELSEC iQ-F Series. Intelligent device station for CC-Link. Mitsubishi Electric has announced its discontinuation (2028/03 To be end of order) — plan spares now; PartnerPLC also sources it on the surplus market after the end of order. Specifications and manuals below are Mitsubishi Electric's own data.

Specifications

Product

Series	MELSEC iQ-F Series
Category	Network/communication module
Sales status	2028/03 To be end of order (Mitsubishi Electric)
Outline	Intelligent device station for CC-Link

Specifications

CC-Link version	Ver. 2.00 (Ver. 1.10 also supported.)
Applicable PLC	FX5U, FX5UC, FX3G, FX3U, FX3GC, FX3UC (Ver. 2.20 SER No. 55***, products produced after May 2005) Only one 64CCL module can be connected to one PLC main unit. [Connecting to the FX5U, FX5UC CPU module] FX5-CNV-BUS or FX5-CNV-BUSC is required to connect to the FX5U/FX5UC CPU module. Select one of the modules according to the system configuration. [Connecting to the connector-type PLC] An FX2NC-CN
Number of occupied I/O points	8 points (Taken from either the input or output points of the PLC.)
Mass (weight)	0.3 kg
Communication method	Broadcast polling method
Network topology	Bus (RS-485)
Transmission speed	156 Kbps/625 Kbps/2.5 Mbps/5 Mbps/10 Mbps Selectable (set by rotary switch)
Transmission format	HDLC compliant
Synchronization method	Flag synchronization method
Encoding method	NRZI method
Error control system	CRC (X 16 +X 12 +X 5 +1)
Station type	Intelligent device station
Station number	1 to 64 (set by rotary switch)
Number of occupied stations	1 to 4 (set by rotary switch)
Maximum total cable length (maximum transmission distance)	In accordance with the CC-Link specification.
Number of remote I/O points	The number of remote input/output points per station is 32 input points and 32 output points. (Single to octuple settings are possible with the extended cyclic setting.) However, the upper 16 points of the final station are occupied by the CC-Link as the system area.
Number of remote register points	Four read points and four write points are available as remote registers in one station. (Single to octuple settings are possible with the extended cyclic setting.)
Connection cable	CC-Link dedicated cable, CC-Link dedicated high-performance cable, Ver. 1.10 compatible CC-Link dedicated cable Cable types cannot be mixed.
Communication with PLC	Execute via the buffer memory using the FROM/TO instruction (or by directly specifying the buffer memory) By FROM and TO instructions (or direct specification of buffer memory) via the buffer memory
Allowable instantaneous power failure time	PS1: Operation continues when the instantaneous power failure is shorter than 1 ms.
LED	RD, SD, RUN, ERR., L RUN, L ERR., POWER
Isolation method	Network bus and internal power supply are insulated each other by photocoupler.

Power supply specifications

Power supply	5 V DC internal power supply: 5 V DC of PLC is not used. (5 V DC is changed from 24 V DC external power supply.) 24 V DC external power supply: Electricity supplied from external terminal block (+20% -15% Ripple Voltage (p-p) 5% or less)
Current consumption	220 mA

Specifications

Ambient temperature	0 to 55°C (32 to 131 °F) when operating and -25 to 75°C (-13 to 167 °F) when stored
Ambient humidity	5 to 95%RH (no condensation) when operating
Vibration resistance: Installed on DIN rail: Frequency: 10 to 57 Hz	Half amplitude: 0.035 mm Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Vibration resistance: Installed on DIN rail: Frequency: 57 to 150 Hz	Acceleration: 4.9 m/s 2 Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Vibration resistance: Direct installing: Frequency: 10 to 57 Hz	Half amplitude: 0.075 mm Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Vibration resistance: Direct installing: Frequency: 57 to 150 Hz	Acceleration: 9.8 m/s 2 Sweep Count for X, Y, Z: 10 times (80 min in each direction)
Shock resistance	147 m/s 2 Acceleration, Action time: 11 ms, 3 times by half-sine pulse in each direction X, Y, and Z
Noise resistance	By noise simulator at noise voltage of 1,000 Vp-p, noise width of 1 μs, rise time of 1 ns and period of 30 to 100 Hz
Dielectric withstand voltage	Between batch of all terminals and ground terminal: 500 V AC for 1 min
Insulation resistance	Between batch of all terminals and ground terminal: 5 MΩ or higher by 500 V DC insulation resistance tester
Grounding	Class D grounding (grounding resistance: 100 Ω or less) (Common grounding with a heavy electrical system is not allowed) Ground the PLC independently or jointly.
Working atmosphere	Free from corrosive or flammable gas and excessive conductive dusts
Working altitude	2000 m or less Do not use the PLC under pressure higher than the atmospheric pressure. Doing so may damage the PLC.