.svg&w=240){kind=small}
B&R 5COSD4.1000-00
The SDL4 Converter makes operation via SDL4 with Automation…
- MPN
- 5COSD4.1000-00
- Category
- Converter
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the B&R 5COSD4.1000-00?
The SDL4 Converter makes operation via SDL4 with Automation Panels possible for B&R industrial PCs that are not equipped with an SDL4 interface or SDL4 slot. This makes it easy to upgrade systems to SDL4 as part of retrofit measures and conversions.When combined with an SDL4 interface integrated on a B&R industrial PC, two Automation Panels can be connected in dual-independent display mode.
Specifications
General information
| Certifications – CE | Yes |
| Certifications – UKCA | Yes |
| Certifications – CRA (Cyber Resilience Act) | In preparation |
| Certifications – UL | cULus E115267; Industrial control equipment |
| LEDs | Status, SDL4 Out |
| B&R ID code | 0xF10C |
Interfaces
| USB – Quantity | 1 |
| USB – Type | USB 2.0 |
| USB – Variant | Type B |
| USB – Transfer rate | Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s) |
| SDL/DVI-D interface – Variant | DVI-I |
| SDL/DVI-D interface – Type | SDL/DVI |
| SDL4 Out – Quantity | 1 |
| SDL4 Out – Variant | Female RJ45 connector, shielded |
| SDL4 Out – Type | SDL4 |
Electrical properties
| Nominal voltage | 24 VDC ±25%, SELV (note: IEC 61010-2-201 requirements must be observed.) |
| Nominal current | Max. 0.3 A |
| Overvoltage category per EN 61131-2 | II |
| Galvanic isolation | Yes |
Operating conditions
| Pollution degree per EN 61131-2 | Pollution degree 2 |
| Degree of protection per EN 60529 | IP20 |
Ambient conditions
| Temperature – Operation | 0 to 55°C (note: The temperature specifications correspond to a specification at 500 meters. The max. ambient temperature is typically derated 1°C per 1000 meters starting at 500 m above sea level.) |
| Temperature – Storage | -20 to 60°C |
| Temperature – Transport | -20 to 60°C |
| Relative humidity – Operation | 5 to 90%, non-condensing |
| Relative humidity – Storage | 5 to 95%, non-condensing |
| Relative humidity – Transport | 5 to 95%, non-condensing |
| Vibration – Operation (continuous) | 2 to 9 Hz: 1.75 mm amplitude / 9 to 200 Hz: 0.5 g peak (note: Top-hat rail clamp set X20AC0RF1 can also be used for improved installation / vibration resistance. Vibration testing is performed per EN 60068-2-6. Shock testing is performed per EN 60068-2-27.) |
| Vibration – Operation (occasional) | 2 to 9 Hz: 3.5 mm amplitude / 9 to 200 Hz: 1 g peak (note: Top-hat rail clamp set X20AC0RF1 can also be used for improved installation / vibration resistance. Vibration testing is performed per EN 60068-2-6. Shock testing is performed per EN 60068-2-27.) |
| Vibration – Storage | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g peak / 200 to 500 Hz: 4 g peak (note: Top-hat rail clamp set X20AC0RF1 can also be used for improved installation / vibration resistance. Vibration testing is performed per EN 60068-2-6. Shock testing is performed per EN 60068-2-27.) |
| Vibration – Transport | 2 to 8 Hz: 7.5 mm amplitude / 8 to 200 Hz: 2 g peak / 200 to 500 Hz: 4 g peak (note: Top-hat rail clamp set X20AC0RF1 can also be used for improved installation / vibration resistance. Vibration testing is performed per EN 60068-2-6. Shock testing is performed per EN 60068-2-27.) |
| Shock – Operation | 15 g peak, 11 ms (note: Top-hat rail clamp set X20AC0RF1 can also be used for improved installation / vibration resistance. Vibration testing is performed per EN 60068-2-6. Shock testing is performed per EN 60068-2-27.) |
| Shock – Storage | 30 g peak, 6 ms (note: Top-hat rail clamp set X20AC0RF1 can also be used for improved installation / vibration resistance. Vibration testing is performed per EN 60068-2-6. Shock testing is performed per EN 60068-2-27.) |
| Shock – Transport | 30 g peak, 6 ms (note: Top-hat rail clamp set X20AC0RF1 can also be used for improved installation / vibration resistance. Vibration testing is performed per EN 60068-2-6. Shock testing is performed per EN 60068-2-27.) |
| Elevation – Operation | Max. 3000 m (note: The temperature specifications correspond to a specification at 500 meters. The max. ambient temperature is typically derated 1°C per 1000 meters starting at 500 m above sea level.) |
Mechanical properties
| Housing – Material | Aluminum |
| Housing – Coating | White |
| Dimensions – Width | 40 mm |
| Dimensions – Height | 100 mm |
| Dimensions – Depth | 80 mm |
| Weight | Approx. 400 g |
No matching specifications
Accessories
Required accessories (order separately)
| 0TB103.91 | Accessories — One-row 3-pin terminal block 0TB103.9x is used for the power supply. |
| 0TB103.9 | Accessories — One-row 3-pin terminal block 0TB103.9x is used for the power supply. |
| 5CASDL.0100-00 | SDL-cables — 5CASDL.0xxx-00 SDL cables are designed for use in fixed installations. For flexible installations (e.g. swing arm systems), the use of 5CAS… |
| 5CASDL.0060-00 | SDL-cables — SDL cable - 6 m |
| 5CASDL.0050-00 | SDL-cables — 5CASDL.0xxx-00 SDL cables are designed for use in fixed installations. For flexible installations (e.g. swing arm systems), the use of 5CAS… |
| 5CASDL.0018-00 | SDL-cables — 5CASDL.0xxx-00 SDL cables are designed for use in fixed installations. For flexible installations (e.g. swing arm systems), the use of 5CAS… |
| 5CASDL.0008-00 | SDL-cables — SDL cable - 0.8 m |
| 5CASD3.1000-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0500-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0300-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0200-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0150-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0100-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0070-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0050-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0030-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
| 5CASD3.0010-00 | SDL3/SDL4/PoE cables — 5CASD3.xxxx-00 SDL3/SDL4 cables are designed to transfer SDL3/SDL4 data and enable easy cable installation. Due to the RJ45 connector, the… |
Optional accessories (12)
| 5ACCRHMI.0011-000 | Accessories — Strain relief USB - For APC2100/APC2200 - For SDL3 Converter/SDL4 Converter |
| 5CADVI.0050-00 | DVI cables — 5CADVI.0xxx-00 DVI cables are designed for use in fixed installations. |
| 5CADVI.0018-00 | DVI cables — 5CADVI.0xxx-00 DVI cables are designed for use in fixed installations. |
| 5ACCRHMI.0000-000 | Miscellaneous — HMI grounding clip |
| 5CASDL.0100-01 | SDL cables: 45° connectors — 5CASDL.0xxx-01 SDL cables with 45° connector are designed for use in fixed installations. |
| 5CASDL.0050-01 | SDL cables: 45° connectors — 5CASDL.0xxx-01 SDL cables with 45° connector are designed for use in fixed installations. |
| 5CASDL.0018-01 | SDL cables: 45° connectors — 5CASDL.0xxx-01 SDL cables with 45° connector are designed for use in fixed installations. |
| 5CASDL.0100-03 | SDL flex cables — 5CASDL.0xxx-03 SDL flex cables are designed for use in fixed as well as flexible installations (e.g. swing arm systems). |
| 5CASDL.0050-03 | SDL flex cables — 5CASDL.0xxx-03 SDL flex cables are designed for use in fixed as well as flexible installations (e.g. swing arm systems). |
| 5CASDL.0018-03 | SDL flex cables — 5CASDL.0xxx-03 SDL flex cables are designed for use in fixed as well as flexible installations (e.g. swing arm systems). |
| 5CAUSB.0050-00 | USB cables — USB 2.0 connection cable - Type A - type B connector - 5 m |
| 5CAUSB.0018-00 | USB cables — USB 2.0 connection cable - Type A - type B connector - 1.8 m |
Downloads & documentation
Official documents from B&R, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
5COSD4.1000-00: frequently asked questions
When can 5COSD4.1000-00 be shipped?
5COSD4.1000-00 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 5COSD4.1000-00 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 5COSD4.1000-00 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 5COSD4.1000-00, subject to availability and destination.
More B&R parts
B&R 5COSD4.1000-00Price and lead time confirmed within 1 business day
Request a Quote