.svg&w=240){kind=small}
Pepperl Fuchs VBA-4E2A-G2-XE/E2
AS-Interface sensor/actuator module
- MPN
- VBA-4E2A-G2-XE/E2
- Category
- Modules
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the Pepperl Fuchs VBA-4E2A-G2-XE/E2?
AS-Interface certificate
Degree of protection IP67
A/B node with extended addressing possibility for up to 62 nodes
Addressing jack
Flat cable connection with cable piercing technique, variable flat cable guide
Communication monitoring
Inputs for 3-wire sensors (PNP) and mechanical contacts
Power supply of the inputs and outputs from the external auxiliary voltage
Ground connection (FE) possible
Function display for bus, ext. auxiliary voltage, inputs and outputs
Detection of output overload
G2 flat module, 4 inputs and 2 electronic outputs
Specifications
General specifications
| Order code (Pepperl+Fuchs part number) | 134144 |
| Node type | A/B node |
| AS-Interface specification | V2.1 |
| Required gateway specification | ≥ V2.1 |
| UL File Number | E223772 |
| Lifecycle | Active (current Pepperl+Fuchs product) |
Indicators/operating means
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of outputs |
| LED PWR | AS-Interface voltage; LED green |
| LED AUX | ext. auxiliary voltage UAUX ; LED green |
| LED IN | switching state (input); 4 LED yellow |
| LED OUT | Switching state (output); 2 LED yellow |
Electrical specifications
| Auxiliary voltage (output) | 20 ... 30 V DC PELV UAUX |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface Ue |
| Rated operating current | ≤ 30 mA Ie |
| Protection class | III |
| Current loading capacity | 2 A (IAUX) |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
Input
| Number/Type | 4 inputs for mechanical contacts or 3-wire sensors (PNP), DC |
| Supply | from external auxiliary voltage UAUX |
| Input current | 3 mA (typically) |
| Switching point | according to DIN EN 61131-2 (type 1) |
| 0 (unattenuated) | ≤ 0.5 mA |
| 1 (attenuated) | ≥ 2 mA |
| Signal delay | < 2 ms (input/AS-Interface) |
| Signal frequency | ≤ 250 Hz |
Output
| Number/Type | 2 electronic outputs, PNP, overload and short-circuit proof |
| Supply | from external auxiliary voltage UAUX |
| Voltage | ≥ (UAUX - 0.5 V) |
| Current | 1 A per output , 2 A per module |
| Usage category | DC-13 |
Galvanic isolation
| Input/Output | none |
| Input/AS-Interface | Basic insulation, rated insulation voltage 120 V DC |
| Output/AS-Interface | Basic insulation, rated insulation voltage 120 V DC |
Directive conformity
| Electromagnetic compatibility | observe notices on the certificate of conformity. |
| Directive 2014/30/EU | EN 62026-2:2013 |
Standard conformity
| Galvanic isolation | EN 60947-1:2007 |
| Degree of protection | EN 60529:2000 |
| Mech. capacity | EN 60068-2-6:2008, EN 60068-2-27:1995 |
| Input | EN 61131-2:2007 |
| Usage category | EN 60947-5-1:2005 |
| Emitted interference | EN 61000-6-4:2001 |
| AS-Interface | EN 62026-2:2013 |
| Noise immunity | EN 61326-1:2006 |
Programming instructions
| Profile | S-7.A.E |
| IO code | 7 |
| ID code | A |
| ID1 code | 7 |
| ID2 code | E |
| Data bits (function via AS-Interface) | InputOutput |
| D0 | IN1 O1 |
| D1 | IN2 O2 |
| D2 | IN3 - |
| D3 | IN4 - |
| Parameter bits (programmable via AS-i) | function |
| P0 | not used |
| P1 | not used |
| P2 | not used |
| P3 | not used |
Ambient conditions
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Relative humidity | 85 % , non-condensing |
| Climatic conditions | For indoor use only |
| Altitude | ≤ 2000 m above MSL |
| Pollution degree | 3 |
Mechanical specifications
| Degree of protection | IP67 |
| Connection | Cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector |
| Material: Housing | PBT |
| Mass | approx. 100 g |
| Tightening torque, cable gland | 0.4 Nm |
| Mounting | Mounting plate |
No matching specifications
Downloads & documentation
Official documents from Pepperl Fuchs, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
VBA-4E2A-G2-XE/E2: frequently asked questions
When can VBA-4E2A-G2-XE/E2 be shipped?
VBA-4E2A-G2-XE/E2 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up VBA-4E2A-G2-XE/E2 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for VBA-4E2A-G2-XE/E2 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for VBA-4E2A-G2-XE/E2, subject to availability and destination.
More Pepperl Fuchs parts
Pepperl Fuchs VBA-4E2A-G2-XE/E2Price and lead time confirmed within 1 business day
Request a Quote