Pepperl Fuchs VBA-4E2A-G2-XE/E2

Name: Pepperl Fuchs VBA-4E2A-G2-XE/E2
Brand: Pepperl Fuchs
SKU: VBA-4E2A-G2-XE/E2

Référence: VBA-4E2A-G2-XE/E2 · Marque: Pepperl Fuchs

Prix sur demande

Demander un devis

Garantie de 12 mois (neuf) · 3 mois (occasion/reconditionné)

Retours sous 30 jours, sans frais de réapprovisionnement sur les pièces non utilisées

Expédié via

En bref

Disponibilité	Confirmation sur demande
Catégorie	Modules
Cycle de vie	active
Garantie	12 mois (neuf) · 3 mois (occasion/reconditionné)

Livraison & disponibilité

Quand VBA-4E2A-G2-XE/E2 peut-il être expédié ?

VBA-4E2A-G2-XE/E2 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.

Puis-je récupérer VBA-4E2A-G2-XE/E2 en personne ?

Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.

La livraison express est-elle disponible ?

Oui — mentionnez-le lors de votre demande de devis pour VBA-4E2A-G2-XE/E2 et nous inclurons les options de livraison express dans notre réponse.

Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?

En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour VBA-4E2A-G2-XE/E2, selon la disponibilité et la destination.

AS-Interface sensor/actuator module. G2 flat module, 4 inputs and 2 electronic outputs. Node type: A/B node. AS-Interface specification: V2.1. Required gateway specification: ≥ V2.1. UL File Number: E223772. LED FAULT: error display; LED redred: communication error or address is 0red flashing: overload of outputs. LED PWR: AS-Interface voltage; LED green. LED AUX: ext. auxiliary voltage UAUX ; LED green. LED IN: switching state (input); 4 LED yellow. LED OUT: Switching state (output); 2 LED yellow. Auxiliary voltage (output): 20 ... 30 V DC PELV. Rated operating voltage: 26.5 ... 31.6 V from AS-Interface. Rated operating current: ≤ 30 mA. Protection class: III. Current loading capacity: 2 A (IAUX). Surge protection: UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV). Number/Type: 4 inputs for mechanical contacts or 3-wire sensors (PNP), DC. Supply: from external auxiliary voltage UAUX. Input current: 3 mA (typically). Switching point: according to DIN EN 61131-2 (type 1). 0 (unattenuated)≤ 0.5 mA1 (attenuated)≥ 2 mA: . 0 (unattenuated): ≤ 0.5 mA. 1 (attenuated): ≥ 2 mA. Signal delay: < 2 ms (input/AS-Interface). Signal frequency: ≤ 250 Hz. Number/Type: 2 electronic outputs, PNP, overload and short-circuit proof. Supply: from external auxiliary voltage UAUX. Voltage: ≥ (UAUX - 0.5 V). Current: 1 A per output , 2 A per module. Usage category: DC-13. Input/Output: none. Input/AS-Interface: Basic insulation, rated insulation voltage 120 V DC. Output/AS-Interface: Basic insulation, rated insulation voltage 120 V DC. Electromagnetic compatibility: observe notices on the certificate of conformity.. Directive 2014/30/EUEN 62026-2:2013: . Directive 2014/30/EU: EN 62026-2:2013. Galvanic isolation: EN 60947-1:2007. Degree of protection: EN 60529:2000. Mech. capacity: EN 60068-2-6:2008, EN 60068-2-27:1995. Input: EN 61131-2:2007. Usage category: EN 60947-5-1:2005. Emitted interference: EN 61000-6-4:2001. AS-Interface: EN 62026-2:2013. Noise immunity: EN 61326-1:2006. Profile: S-7.A.E. IO code: 7. ID code: A. ID1 code: 7. ID2 code: E. Data bits (function via AS-Interface): InputOutput. D0 IN1 O1D1 IN2 O2D2 IN3 -D3 IN4 -: . D0: IN1 O1. D1: IN2 O2. D2: IN3 -. D3: IN4 -. Parameter bits (programmable via AS-i): function. P0not usedP1not usedP2not usedP3not used: . P0: not used. P1: not used. P2: not used. P3: not used. Ambient temperature: -25 ... 60 °C (-13 ... 140 °F). Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Relative humidity: 85 % , noncondensing. Climatic conditions: For indoor use only. Altitude: ≤ 2000 m above MSL. Pollution degree: 3. Degree of protection: IP67. Connection: Cable piercing methodflat cable yellow/flat cable blackinputs/outputs: M12 round connector. Material: . HousingPBT: . Housing: PBT. Mass: approx. 100 g. Tightening torque, cable gland: 0.4 Nm. Mounting: Mounting plate

Caractéristiques

General specifications

Node type	A/B node
AS-Interface specification	V2.1
Required gateway specification	≥ V2.1
UL File Number	E223772

Indicators/operating means

LED FAULT	error display; LED redred: communication error or address is 0red flashing: overload of outputs
LED PWR	AS-Interface voltage; LED green
LED AUX	ext. auxiliary voltage UAUX ; LED green
LED IN	switching state (input); 4 LED yellow
LED OUT	Switching state (output); 2 LED yellow

Electrical specifications

Auxiliary voltage (output)	20 ... 30 V DC PELV UAUX
Rated operating voltage	26.5 ... 31.6 V from AS-Interface Ue
Rated operating current	≤ 30 mA Ie
Protection class	III
Current loading capacity	2 A (IAUX)
Surge protection	UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)

Input

Number/Type	4 inputs for mechanical contacts or 3-wire sensors (PNP), DC
Supply	from external auxiliary voltage UAUX
Input current	3 mA (typically)
Switching point	according to DIN EN 61131-2 (type 1)
0 (unattenuated)≤ 0.5 mA1 (attenuated)≥ 2 mA	0 (unattenuated)
0 (unattenuated)	≤ 0.5 mA
1 (attenuated)	≥ 2 mA
Signal delay	< 2 ms (input/AS-Interface)
Signal frequency	≤ 250 Hz

Output

Number/Type	2 electronic outputs, PNP, overload and short-circuit proof
Supply	from external auxiliary voltage UAUX
Voltage	≥ (UAUX - 0.5 V)
Current	1 A per output , 2 A per module
Usage category	DC-13

Galvanic isolation

Input/Output	none
Input/AS-Interface	Basic insulation, rated insulation voltage 120 V DC
Output/AS-Interface	Basic insulation, rated insulation voltage 120 V DC

Directive conformity

Electromagnetic compatibility	observe notices on the certificate of conformity.
Directive 2014/30/EUEN 62026-2:2013	Directive 2014/30/EU
Directive 2014/30/EU	EN 62026-2:2013

Standard conformity

Galvanic isolation	EN 60947-1:2007
Degree of protection	EN 60529:2000
Mech. capacity	EN 60068-2-6:2008, EN 60068-2-27:1995
Input	EN 61131-2:2007
Usage category	EN 60947-5-1:2005
Emitted interference	EN 61000-6-4:2001
AS-Interface	EN 62026-2:2013
Noise immunity	EN 61326-1:2006

Programming instructions

Profile	S-7.A.E
IO code	7
ID code	A
ID1 code	7
ID2 code	E
Data bits (function via AS-Interface)	InputOutput
D0 IN1 O1D1 IN2 O2D2 IN3 -D3 IN4 -	D0
D0	IN1 O1
D1	IN2 O2
D2	IN3 -
D3	IN4 -
Parameter bits (programmable via AS-i)	function
P0not usedP1not usedP2not usedP3not used	P0
P0	not used
P1	not used
P2	not used
P3	not used

Ambient conditions

Ambient temperature	-25 ... 60 °C (-13 ... 140 °F)
Storage temperature	-25 ... 85 °C (-13 ... 185 °F)
Relative humidity	85 % , noncondensing
Climatic conditions	For indoor use only
Altitude	≤ 2000 m above MSL
Pollution degree	3

Mechanical specifications

Degree of protection	IP67
Connection	Cable piercing methodflat cable yellow/flat cable blackinputs/outputs: M12 round connector
Material
HousingPBT	Housing
Housing	PBT
Mass	approx. 100 g
Tightening torque, cable gland	0.4 Nm
Mounting	Mounting plate