Honeywell – 022630 Escape Route Technology - 1385 Networked Switch Programme Control Terminal Series

The 1385 series includes flush-mounted emergency exit control terminals for complex individual applications and networked applications.They are used to control electric locking elements along escape and rescue routes and are approved according to EltVTR.Stand-alone operation:

Implementation of complex individual applications

Inputs/outputs expandable with I/O module 901-20 (part no. 022644)

Commissioning and configuration via key switch or PC (TSB controller required)Networked operation:

Networkable application for central configuration (FT Manager) and visualization via WINMAG

Networkable via TSB door control BUS controller model 970-30 (part no. 022520.10)Implementation of simple and complex door solutions

Inputs/outputs expandable with I/O module 901-20 (part no. 022644)The emergency exit control units are modular and can be installed in a 2-gang or 3-gang frame. Pre-assembled packages with corresponding frames compatible with the most common switch systems are available.Commissioning and configuration are performed using the key switch.The program is available in a double or triple frame. Please note: A flush-mount power supply must be ordered or quoted separately.The inputs and outputs are available for various functions, such as:

Forwarding defined system states and implementing various control commands for connection to a higher-level building management system.

Connection to adjacent systems such as burglar alarm systems or fire alarm systems.

Integration of other door components such as revolving door operators, electromechanical locks, hold-open devices, and access control systems.

Features & Benefits:Emergency Exit Control Module

Illuminated emergency button with reusable, captive, shatterproof protective cover

Integrated optical door status indicator with symbolically arranged high-performance LEDs (green / red / yellow) for unlocked / locked / alarm

Emergency button warning Label: For double frames: For triple frames:

Self-adhesive label 90x90 mm included

Illuminated warning label module 55x55 mm

Self-adhesive label 90x90 mm not included

Multi-tone signal and tamper contact

Adjustable time sequences for max. permanent release, delayed permanent release, momentary release, pre-alarm, alarm time, orientation signal

Monitoring of door open time during momentary release

1 fire alarm system input

1 configurable input for:

Control of locking/unlocking, momentary release, alarm acknowledgment via a Potential-free contact of operating elements such as card readers, door code devices or similar

Short-term release via access control system or

Emergency unlocking via fire alarm system or

Priority locking via burglar alarm system or

Unlocking via timer, etc.

With a configurable relay output for:

Door locked/unlocked or

Door open/closed or

Collective alarm or

Individual alarm or

Control of door opener/motor lock/revolving door drive/hold-open system

TS bus interface for parameterization via software (FT-Manager) and networking for parallel operation with WINMAG visualization software and control panel

Connections:

SYSCON-4: Power supply

SYSCON-5: Control unit

Screw terminals

Key switch module

For locking/unlocking, momentary unlocking, alarm reset

Tamper contact

With Euro profile half cylinder, including 3 keys

Cover matching the corresponding switch range

Technical data

Integrated control

External power supply required (022605.10)

Networked application via RS-485 TS-BUS controller (022520.11)

Standalone application (Offline operation possible)

Emergency stop switch

Key switch with Euro profile cylinder, adjustable locking bolt 8 x 45°, length 30.5 mm

Setting times and functions via key switch or FT Manager via TS-BUS controller (022520.11)

Input voltage 12-24 V DC

Output voltage 12-24 V DC

Output current for external devices: Max. 2 A (depending on the external power supply)

Current consumption: 0.2 A at 24 V

Operating temperature range: -5 °C to +40 °C

Protection class: IP 30

Dimensions: 2- or 3-gang frame in the switch range, mounting in flush-mounted switch boxes 62.5 mm deep

Inputs: 1 x configurable, plus 1 x fire alarm system

Outputs: 1 x configurable, changeover contact 30 V / 1 A

Key switch can be operated against the direction of escape (without indicator)

Honeywell 022630 — Networked escape door terminals, model 1385, including: 1 x Exit warning sign (or warning sign module in the 3 frame model), 1 x emergency exit control module, 1 x key switch module, 1 x frame. Requires TS-BUS Controller (Model 970). PartnerPLC sources new, surplus and discontinued Honeywell parts — request a quote for price, condition and lead time.

Specifications