.svg&w=240){kind=small}
B&R X90DSI00.04-00
I/O module, IO-Link master with 4 IO-Link interfaces
- MPN
- X90DSI00.04-00
- Category
- Communication modules
Price and lead time confirmed within 1 business day
Request a Quote
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- Ships via
- 100% positive eBay feedback
What is the B&R X90DSI00.04-00?
18 to 30 VDC
4 IO-Link devices
4 digital channels, can be used as inputs or outputs
Sensor/actuator power supply
NetTime timestamps: IO-Link data
X2X Link
The DS option board is an IO-Link master that allows intelligent sensors and actuators to be connected per the IO-Link standard. Communication to the mainboard is made possible via X2X Link.
Specifications
Short description
| I/O module | IO-Link master with 4 IO-Link interfaces |
General information
| Diagnostics – Module run/error | Yes, using software status |
| Power consumption – Internal I/O | 0.6 W |
| Certifications – CE | Yes |
| Certifications – UKCA | Yes |
| Certifications – CRA (Cyber Resilience Act) | In preparation |
| B&R ID code | 0xF9F7 |
| Status indicators | - |
| Additional power dissipation caused by actuators (resistive) [W] | - |
Sensor/Actuator power supply
| Overload protection – Switch-off delay | Configurable using software |
| Overload protection – Switch-off duration | Configurable using software |
| Voltage | I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 0.3 A | Max. 0.3 V |
| Power consumption | Max. 12 W per IO-Link interface |
| Short-circuit proof | Yes |
IO-Link in master mode
| Transfer rates – COM1 | 4.8 kbaud |
| Transfer rates – COM2 | 38.4 kbaud |
| Transfer rates – COM3 | 230.4 kbaud |
| Limit values for COM3 – Max. connection capacity | 22 nF (cable + IO-Link device) |
| Limit values for COM3 – Max. load | 96 Ω / 250 mA |
| Data format | 1 start bit, 8 data bits, 1 parity bit (even), 1 stop bit |
| Bus level | 24 VDC (active), 0 VDC (resting voltage) |
IO-Link in master mode or in SIO mode "digital output"
| Switching delay – 0 → 1 | <1 µs |
| Switching delay – 1 → 0 | <1 µs |
| Variant | Bipolar, positive and negative switching |
| Peak short-circuit current | <1.3 A |
| Residual voltage | <0.7 VDC at nominal current 0.25 A |
| Switching voltage | I/O power supply minus voltage drop for short-circuit protection and semiconductor switch |
| Voltage drop on semiconductor switch | Max. 0.44 VDC at 0.2 A |
| Switching frequency | Typ. 25 kHz ; 300 kHz in IO-Link master mode |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Configurable with software |
IO-Link in SIO mode "Digital output"
| Nominal voltage | 24 VDC |
| Nominal output current | 0.25 A |
| Total nominal current | Max. 1 A |
| Output circuit | Sink or source |
| Switching frequency (resistive load) | Max. 500 Hz |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads (note: Cutoff current on overload: Between 0.3 A and 0.8 A.) |
IO-Link in SIO mode "digital input"
| Input filter – Hardware | 220 ns |
| Input filter – Software | 3 µs (without glitch filter); 4.2 µs (with glitch filter) |
| Switching threshold – Low | <5 VDC |
| Switching threshold – High | >15 VDC |
| Nominal voltage | 24 VDC |
| Input characteristics per EN 61131-2 | Type 1 |
| Input circuit | Sink |
| Input voltage | 24 VDC -15% / +20% |
| Input current at 24 VDC | Typ. 5.8 mA |
| Input resistance | Typ. 4.14 kΩ |
Electrical properties
| Electrical isolation | Bus isolated from IO-Link; IO-Link not isolated from IO-Link |
Operating conditions
| Mounting orientation – Any | Yes |
| Degree of protection per EN 60529 | Up to IP69K (note: Depends on the mainboard. For additional details, see the data sheet for the mainboard.) |
Ambient conditions
| Temperature – Storage | -40 to 85°C |
| Temperature – Transport | -40 to 85°C |
| Relative humidity – Operation | 5 to 100%, condensing |
| Relative humidity – Storage | 5 to 100%, condensing |
| Relative humidity – Transport | 5 to 100%, condensing |
Mechanical properties
| Dimensions – Width | 47 mm |
| Dimensions – Length | 95 mm |
Downloads & documentation
Official documents from B&R, downloaded directly from the manufacturer.
Data sheets & manuals
X90DSI00.04-00: frequently asked questions
When can X90DSI00.04-00 be shipped?
X90DSI00.04-00 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up X90DSI00.04-00 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for X90DSI00.04-00 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for X90DSI00.04-00, subject to availability and destination.
More B&R parts
B&R X90DSI00.04-00Price and lead time confirmed within 1 business day
Request a Quote