.svg&w=240){kind=small}
B&R 4PPC30.101G-22B
Power Panel C30, 10.1", landscape format
- MPN
- 4PPC30.101G-22B
- Category
- Power Panel C30
Price and lead time confirmed within 1 business day
Request a Quote
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- Ships via
What is the B&R 4PPC30.101G-22B?
Power Panel C30, 10.1", landscape format, fieldbus interfaces: 1x CAN bus, 1x RS232. CPU and memory: 1 GHz (ARM Cortex-A8), 256 MB DDRAM, 8 kB FRAM, 512 MB onboard flash drive. Display and touch screen: 10.1", 1024 x 600 (WSVGA) resolution, analog resistive touch screen, landscape format, anthracite gray pinstripe. Interfaces: 1x Ethernet 10/100 Mbit/s, 2x USB 2.0, 1x CAN bus, 1x RS232.
Specifications
General information
| Support – Controller redundancy | No |
| Support – ACOPOS support | No |
| Support – Visual Components support | Yes |
| Support – Safety support | No |
| Certifications – CE | Yes |
| Certifications – UKCA | Yes |
| Certifications – UL | cULus E115267; Industrial control equipment |
| B&R ID code | 0xF359 |
| Cooling | Passive |
| Power button | No |
| Reset button | Yes |
| Status indicators | Supply voltage OK, operating state, module status, Ethernet, CAN Rx/Tx, RS232 Rx/Tx |
| Buzzer | Yes |
Controller
| Processor – Data code | 24 kB |
| Processor – Program code | 32 kB |
| Processor – Type | ARM Cortex-A8 |
| Processor – Clock frequency | 1 GHz |
| Processor – L2 cache | 256 kB |
| Application memory – Guaranteed | 40 TB |
| Application memory – Results for 5 years | 21.9 GB/day |
| Application memory – Type | 512 MB flash memory |
| Application memory – Data retention | 10 years |
| Application memory – Guaranteed erase/write cycles | 20,000 |
| Application memory – Error-correcting code (ECC) | Yes |
| Application memory – Storage health data support | Yes, AR 4.90 and later |
| Bootloader | Automation Runtime AR 4.09 |
| Real-time clock | Nonvolatile, resolution 1 s, -10 to 10 ppm accuracy at 25°C (note: The real-time clock is backed up for approx. 1000 hours @ 25°C by a gold foil capacitor. The gold foil capacitor is completely charged after 3 continuous hours of operation.) |
| Floating point unit (FPU) | Yes |
| Mode/Node switches | No |
| Remanent variables | 8 kB FRAM, retention >10 years (note: The memory size for remanent variables is configurable in Automation Studio.) |
| DRAM | 256 MB |
| Shortest task class cycle time | 1 ms |
| Typical instruction cycle time | 0.01 μs |
| Temperature cutoff | No |
Display
| Viewing angles – Horizontal | Direction L / Direction R = Typ. 80° |
| Viewing angles – Vertical | Direction U / Direction D = Typ. 80° |
| Backlight – Type | LED |
| Backlight – Brightness | Typ. 500 cd/m² |
| Backlight – Half-brightness time | 50,000 h (note: At 25°C ambient temperature.) |
| Touch screen – Type | AMT |
| Touch screen – Technology | Analog resistive |
| Touch screen – Controller | B&R, 12-bit |
| Touch screen – Transmittance | 80% ±3% |
| Type | TFT color |
| Diagonal | 10.1" |
| Colors | 16.7 million (RGB, 8 bits per channel) |
| Resolution | WSVGA, 1024 x 600 pixels |
| Contrast | Typ. 500:1 |
| Screen rotation | Yes |
Interfaces
| Interface IF1 – Type | USB 2.0 |
| Interface IF1 – Variant | Type A |
| Interface IF1 – Current-carrying capacity | 0.49 A |
| Interface IF2 – Type | USB 2.0 |
| Interface IF2 – Variant | Type A |
| Interface IF2 – Current-carrying capacity | 0.49 A |
| Interface IF3 – Physical layer | 10BASE-T/100BASE-TX |
| Interface IF3 – Half-duplex | Yes |
| Interface IF3 – Full-duplex | Yes |
| Interface IF3 – Autonegotiation | Yes |
| Interface IF3 – Auto-MDI/MDIX | Yes |
| Interface IF3 – Type | Ethernet |
| Interface IF3 – Variant | 1x RJ45 shielded |
| Interface IF3 – Line length | Max. 100 m between 2 nodes (segment length) |
| Interface IF3 – Max. transfer rate | 10/100 Mbit/s |
| Interface IF4 – Bus length ≤25 m | 1 Mbit/s |
| Interface IF4 – Bus length ≤60 m | 500 kbit/s |
| Interface IF4 – Bus length ≤200 m | 250 kbit/s |
| Interface IF4 – Bus length ≤1000 m | 50 kbit/s |
| Interface IF4 – Type | CAN bus |
| Interface IF4 – Variant | 3 pins of the 6-pin multipoint connector |
| Interface IF4 – Max. distance | 1000 m |
| Interface IF4 – Bus terminating resistor | 120 Ω, switchable using softwarefootnote-text">The functionality for switching on the terminating resistor using software is available starting with Automation Studio 4.3.1 and Automation Runtime 4.31.</SPAN>"> (note: <SPAN class=) |
| Interface IF8 – Type | RS232 |
| Interface IF8 – Variant | 3 pins of the 6-pin multipoint connector |
| Interface IF8 – Max. distance | 900 m |
| Interface IF8 – Transfer rate | Max. 115.2 kbit/s |
Electrical properties
| Nominal voltage | 24 VDC -15% / +20% |
| Power consumption | Typ. 6.5 W / Max. 12.5 W (note: Power consumption including all interfaces.) |
| Fuse | 3 A slow-blow, internal (note: The internal fuse cannot be replaced by the user or reset.) |
| Reverse polarity protection | Yes |
| Electrical isolation | Ethernet (IF3) to other interfaces and to device |
Operating conditions
| Installation elevation above sea level – 0 to 2000 m | No limitation |
| Installation elevation above sea level – >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | Front: IP65, Back: IP20 |
| Degree of protection per UL 50 | Type 1 |
Ambient conditions
| Temperature – Operation | -20 to 60°C |
| Temperature – Storage | -25 to 70°C |
| Temperature – Transport | -25 to 70°C |
| Relative humidity | 5 to 95%, non-condensing |
Mechanical properties
| Front – Design | Anthracite gray pinstripe |
| Dimensions – Width | 276 mm |
| Dimensions – Height | 172 mm |
| Dimensions – Depth | 47.8 mm |
| Weight | 0.9 kg |
Accessories
Optional accessories (7)
| 0TB6102.2110-01 | Terminal blocks — Accessory terminal block, 2-pin (3.81), cage clamp terminal block 1.5 mm² |
| 0TB5106.2110-01 | Terminal blocks — Accessory terminal block, 6-pin (2.5), cage clamp terminal block 0.5 mm² |
| 9A0013.01 | Accessories — Stylus pen for resistive touch screen |
| 6ACCRPP3.0000-000 | Other — This installation kit contains the following replacement parts: 9 retaining clips; 1x 2-pin cage clamp terminal block; 1x 2-pin screw clamp… |
| 0TB6102.2010-01 | Terminal blocks — Accessory terminal block, 2-pin (3.81), screw clamp terminal block 1.5 mm² |
| 5MMUSB.4096-01 | USB accessories — 4 GB; USB 1.1, USB 2.0; High transfer rate; High data storage; Ambient temperature during operation: 0 to 70°C USB 2.0 flash drive 4096 MB… |
| 5MMUSB.2048-01 | USB accessories — 2 GB; USB 1.1, USB 2.0; High transfer rate; High data retention; Ambient temperature during operation: 0 to 70°C USB 2.0 flash drive 2048 M… |
Downloads & documentation
Official documents from B&R, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
Certificates (1)
4PPC30.101G-22B: frequently asked questions
When can 4PPC30.101G-22B be shipped?
4PPC30.101G-22B is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 4PPC30.101G-22B in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 4PPC30.101G-22B and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 4PPC30.101G-22B, subject to availability and destination.
More B&R parts
B&R 4PPC30.101G-22BPrice and lead time confirmed within 1 business day
Request a Quote