Home / I/O systems / X20 System / Digital signal processing and preparation

Digital signal processing and preparation Parts

B&R

I/O module, 1 AB incremental encoder 24 V, 4 digital inputs

B&R

I/O module, 3 digital 5 V (symmetrical) channels…

B&R

I/O module, 4 digital input channels

B&R

I/O module, 1x HIPERFACE interface

B&R

I/O module, 1x EnDat interface

B&R

I/O module, 4 digital input channels

Compare Digital signal processing and preparation

Key specifications of the parts listed on this page, taken from the manufacturer's data sheets.

MPN	Power consumption – Internal I/O	Input current at 24 VDC	Input resistance	Input frequency	Temperature – Derating
X20CM1201	1.5 W	Approx. 1.3 mA	18.4 kΩ	Max. 100 kHz	-
X20DS1119	1.5 W	Approx. 3.4 mA	Approx. 7.19 kΩ	600 kHz	-
X20DS1319	1.5 W	Approx. 1.3 mA	18.4 kΩ	100 kHz	-
X20DS1828	1.3 W	—	—	—	See section "Derating".
X20DS1928	1.3 W	—	—	—	See section "Derating".
X20DS4389	1.5 W	Approx. 1.3 mA	18.4 kΩ	40 kHz	See section "Derating".

Diagnostics – Module run/error	Yes, using LED status indicator and software
Power consumption – Bus	0.01 W
Certifications – CE	Yes
Certifications – UKCA	Yes
Certifications – UL	cULus E115267; Industrial control equipment
Certifications – KC	Yes
Additional power dissipation caused by actuators (resistive) [W]	-
Type of signal lines	Shielded lines must be used for all signal lines.