Pepperl Fuchs VBA-2E2A-G10-Z/E2J-1M-V15-G – AS-Interface sensor/actuator module. G10 ultra compact…

AS-Interface sensor/actuator module. G10 ultra compact module

2 inputs, 2 outputs. Node type: A/B node. AS-Interface specification: V3.0. Required gateway specification: V3.0. UL File Number: E223772 "For use in NFPA 79 Applications only". MTBF: 379 a. LED FAULT: error display; LED redred: communication error or address is 0red flashing: overload. LED PWR: AS-Interface voltage; green LEDgreen: voltage OKflashing green: address 0. Rated operating voltage: 18.5 ... 31.6 V from AS-Interface. Rated operating current: ≤ 40 mA (without inputs/outputs) / max. 200 mA. Protection class: III. Surge protection: Ue: Over voltage category III, safe isolated power supplies (PELV). Number/Type: 2 inputs for mechanical contacts. Supply: from AS-Interface. Voltage: ≤ Ue. Input current: ≤ 8 mA (limited internally). Switching point: . 0 (unattenuated)≤ 0.5 mA1 (attenuated)≥ 2 mA: . 0 (unattenuated): ≤ 0.5 mA. 1 (attenuated): ≥ 2 mA. Signal delay: < 1 ms (input/AS-Interface). Number/Type: 2 electronic outputs, PNP, overload and short-circuit proof. Supply: from AS-Interface. Voltage: ≥ (Ue - 9.0 V). Current loading capacity: ≤ 150 mA Total current , overload and short-circuit protected. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013: . Directive 2014/30/EU: EN 62026-2:2013. Degree of protection: EN 60529:2000. Fieldbus standard: EN 62026-2:2013. Emitted interference: EN 61000-6-4:2011. AS-Interface: EN 62026-2:2013. Noise immunity: EN 61000-6-2:2005 , EN 62026-2:2013. Profile: S-7.A.7. IO code: 7. ID code: A. ID1 code: 7. ID2 code: 7. Data bits (function via AS-Interface): InputOutput. D0 IN1 OUT1D1 IN2 OUT2D2 IN1 OUT1D3 IN2 OUT2: . D0: IN1 OUT1. D1: IN2 OUT2. D2: IN1 OUT1. D3: IN2 OUT2. Parameter bits (programmable via AS-i): function. P0communication monitoringP0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their conditionP1Input filterP1 = 0 input filter on, pulse suppression ≤ 2 msP1 = 1 input filter off (default settings)P2Synchronous modeP2 = 0 synchronous mode onP2 = 1 synchronous mode off (default settings)P3not used: . P0: communication monitoringP0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition. P1: Input filterP1 = 0 input filter on, pulse suppression ≤ 2 msP1 = 1 input filter off (default settings). P2: Synchronous modeP2 = 0 synchronous mode onP2 = 1 synchronous mode off (default settings). P3: not used. UL approval: cULus Listed, Type 1 enclosure. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Shock and impact resistance: 30 g, 11 ms in 6 spatial directions 3 shocks10 g, 16 ms in 6 spatial directions 1000 shocks. Vibration resistance: 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles. Degree of protection: housing: IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* M12 socket: IP67/IP68/IP69K. Connection: AS-Interface: AS-Interface flat cable In-/outputs & matching connector: M12 connector, 5-pin, A-coded, acc. to IEC 61076-2-101:2012. Material: . ContactsCuSn / AuHousingPBT PCBodyPUR, blackCablePURMounting screwStainless steel 1.4305 / AISI 303: . Contacts: CuSn / Au. Housing: PBT PC. Body: PUR, black. Cable: PUR. Mounting screw: Stainless steel 1.4305 / AISI 303. Cable: . Sheath diameter∅4.8 mmColorblackCores5 x 0.34 mm2LengthL1 m: . Sheath diameter: ∅4.8 mm. Color: black. Cores: 5 x 0.34 mm2. Length: 1 m. Mass: 84 g. Tightening torque, fastening screws: 1.65 Nm. Tightening torque, cable gland: 0.4 Nm. Dimensions: . Height21.5 mmWidth27.7 mmLength40.5 mm: . Height: 21.5 mm. Width: 27.7 mm. Length: 40.5 mm

Specifications