Pepperl Fuchs UB1500-F42S-UK-V95 – Ultrasonic sensor. Single head system
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Diffuse Mode and Retroreflective Sensors |
| Lifecycle | Active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can UB1500-F42S-UK-V95 be shipped?
UB1500-F42S-UK-V95 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up UB1500-F42S-UK-V95 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for UB1500-F42S-UK-V95 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for UB1500-F42S-UK-V95, subject to availability and destination.
Ultrasonic sensor. Single head system, Relay output for high power, Extremely small unusable area, TEACH-IN, Series: UB-F42, Operating voltage: 22 ... 253 V AC/DC, Output type: 1 relay output, Connection: 5-pin V95 connector (7/8"-16 UN 2A), Housing: PBT. Sensing range: 70 ... 1500 mm. Adjustment range: 90 ... 1500 mm. Dead band: 0 ... 70 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 175 kHz. Response delay: approx. 150 ms. LED green: solid green: Power on. LED yellow: solid: switching state switch outputflashing: program function. LED red: normal operation: "fault"program function: no object detected. Fusing: ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly.. Operating voltage: 22 ... 253 V AC/DC. No-load supply current: ≤ 60 mA. Time delay before availability: ≤ 800 ms. Output type: 1 relay output. Rated operating current: 3 A. Repeat accuracy: ≤ 0.5 % of switching point. Switching frequency: ≤ 3 Hz. Range hysteresis: 1 % of the set operating distance. Temperature influence: ± 1 % of full-scale value. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Degree of protection: IP65. Connection: 5-pin V95 connector (7/8"-16 UN 2A). Material: . HousingPBTTransducerepoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT: . Housing: PBT. Transducer: epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT. Mass: 260 g. Dimensions: . Height80 mmWidth34 mmLength80 mm: . Height: 80 mm. Width: 34 mm. Length: 80 mm
Specifications
General specifications
| Sensing range | 70 ... 1500 mm |
| Adjustment range | 90 ... 1500 mm |
| Dead band | 0 ... 70 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 175 kHz |
| Response delay | approx. 150 ms |
Indicators/operating means
| LED green | solid green: Power on |
| LED yellow | solid: switching state switch outputflashing: program function |
| LED red | normal operation: "fault"program function: no object detected |
Electrical specifications
| Fusing | ≤ 3 A Slow-blow fuse in accordance with IEC 60127-2 Sheet 5 required. Recommendation: after a short circuit, check that the device is functioning correctly. |
| Operating voltage | 22 ... 253 V AC/DC UB |
| No-load supply current | ≤ 60 mA I0 |
| Time delay before availability | ≤ 800 ms tv |
Output
| Output type | 1 relay output |
| Rated operating current | 3 A Ie |
| Repeat accuracy | ≤ 0.5 % of switching point |
| Switching frequency | ≤ 3 Hz f |
| Range hysteresis | 1 % of the set operating distance H |
| Temperature influence | ± 1 % of full-scale value |
Compliance with standards and directives
| Standard conformity | |
| StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Ambient conditions
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Degree of protection | IP65 |
| Connection | 5-pin V95 connector (7/8"-16 UN 2A) |
| Material | |
| HousingPBTTransducerepoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | Housing |
| Housing | PBT |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass | 260 g |
| Dimensions | |
| Height80 mmWidth34 mmLength80 mm | Height |
| Height | 80 mm |
| Width | 34 mm |
| Length | 80 mm |
More Pepperl Fuchs parts
Available on requestPepperl Fuchs UB120-12GM-E4-V1 – Ultrasonic sensor. Single head system
Available on requestPepperl Fuchs UB120-12GM-E5-V1 – Ultrasonic sensor. Single head system
Available on requestPepperl Fuchs UB120-12GM-I-V1 – Ultrasonic sensor. Single head system
Available on requestPepperl Fuchs UB120-12GM-U-V1 – Ultrasonic sensor. Single head system
Available on requestPepperl Fuchs UB200-12GM-E4-V1 – Ultrasonic sensor. Single head system, Switching output
Available on requestPepperl Fuchs UB200-12GM-E5-V1 – Ultrasonic sensor. Single head system, Switching output
Available on requestPepperl Fuchs UB200-12GM-I-V1 – Ultrasonic sensor. Single head system
Available on requestPepperl Fuchs UB200-12GM-U-V1 – Ultrasonic sensor. Single head system