B&R X20AI2636

Name: B&R X20AI2636
Brand: B&R
SKU: X20AI2636

MPN: X20AI2636 · Brand: B&R

Price on request

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	Analog inputs
Lifecycle	active
Warranty	12-month (new) · 3-month (used/refurbished)

Shipping & availability

When can X20AI2636 be shipped?

X20AI2636 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up X20AI2636 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for X20AI2636 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for X20AI2636, subject to availability and destination.

2 analog inputsCurrent or voltage signal configuration for the entire module16-bit digital converter resolutionMinimum conversion time of 40 µs for all inputsThe conversion time for the entire module can be configured in 0.02 µs steps.Maximum 14 samples (16-bit) for the entire module per X2X Link cycleOversampling: Up to 16 analog values per channel (internal)Timestamp for the last conversion of an X2X Link cycle The module is equipped with 2 inputs with 16-bit digital converter resolution. It is possible to select between the current and voltage signal using different terminals. With the oversampling function, up to 16 analog values per channel can be recorded.This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.

Specifications

I/O module	2 analog inputs ±10 V or 0 to 20 mA
B&R ID code	0xB3A7
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Inputs	Yes, using LED status indicator and software
Channel type	Yes, using software
Bus	0.01 W
Internal I/O	1.2 W
Additional power dissipation caused by actuators (resistive) [W]	-
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
KC	Yes
Input	±10 V or 0 to 20 mA, via different terminal connections
Input type	Differential input
Voltage	<0.01%
Current	<0.015%
Conversion time	40 μs for all inputs
Output format	INT
Input protection	Protection against wiring with supply voltage
Conversion procedure	SAR
Input filter	Hardware - Third-order low-pass filter / cutoff frequency 10 kHz
Gain	0.08%
Offset	0.02%
DC	70 dB
50 Hz	70 dB
Common-mode range	±12 V
Crosstalk between channels	<-70 dB
Insulation voltage between channel and bus	500 Veff
Electrical isolation	Channel isolated from bus Channel not isolated from channel
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB06 or X20TB12 separately. Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm