B&R X20AI2237

Name: B&R X20AI2237
Brand: B&R
SKU: X20AI2237

MPN: X20AI2237 · Brand: B&R

Price on request

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	Analog inputs
Lifecycle	active
Warranty	12-month (new) · 3-month (used/refurbished)

Shipping & availability

When can X20AI2237 be shipped?

X20AI2237 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up X20AI2237 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for X20AI2237 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for X20AI2237, subject to availability and destination.

2 analog voltage inputsElectrically isolated analog channelsElectrically isolated sensor supplies16-bit digital converter resolutionVery high sampling rateNetTime timestamp: Moment of measurement The module is equipped with 2 voltage measurement inputs with 16-bit digital converter resolution.Each voltage input has its own sensor supply. The two channels with their respective sensor supplies are electrically isolated from each other.

Specifications

I/O module	2 analog inputs ±10 V
B&R ID code	0xC9C4
Status indicators	I/O function per channel, operating state, module status, sensor power supply per channel
Module run/error	Yes, using LED status indicator and software
Inputs	Yes, using LED status indicator and software
Sensor power supply	Yes, using LED status indicator and software
Bus	0.05 W
Internal I/O	1.05 W (Rev. ≥D0), 1.15 W (Rev. <D0)
Additional power dissipation caused by actuators (resistive) [W]	-
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
Input	±10 V
Input type	Differential input
Digital converter resolution	±15-bit
Data output rate	10000 samples per second
Data type	INT
Voltage	INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 305.176 µV
Input impedance in signal range	20 MΩ
Input protection	Up to 30 VDC, reverse polarity protection
Open-circuit detection	Yes, using software
Permissible input signal	Max. ±30 V
Output of digital value during overload	Configurable
Conversion procedure	SAR
Input filter	Fourth-order low-pass filter / Cutoff frequency 10 kHz
Gain	0.013%
Offset	0.0035%
Max. gain drift	<0.0008%/°C
Max. offset drift	<0.0025%/°C
DC	84 dB
Up to 60 Hz	84 dB
Up to 10 kHz	82 dB
Common-mode range	±14 V
Nonlinearity	<0.003%
Channel - Channel	1000 VAC
Channel - Bus	1000 VAC
Channel - Ground	1000 VAC
Bus - Ground	800 VAC
Power consumption	0.75 W per channel
Nominal voltage	25 V ±2%
Nominal output current	Max. 30 mA
Short-circuit proof	Yes, continuous
Up to 100 kHz	≤2.2 mV
Up to 1 MHz	≤22 mV
Higher	≤100 mV
Typical	<50 mA
Maximum	60 mA
Behavior on short circuit	Current limiting
Electrical isolation	Channel isolated from channel and bus Sensor power supply isolated from sensor power supply Sensor power supply not isolated from channel
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm