B&R 8I74T401500.01P-1

ACOPOSinverter P74, 3x 380 to 500 V, 15 kW, integrated EMC filter and brake chopper

MPN: 8I74T401500.01P-1

Price and lead time confirmed within 1 business day

Request a Quote

1We check stock, condition and lead time
2You get a written quote by email
3Approve it and we ship — in-stock parts within 1 business day

12-month warranty (new) · 3-month (used/refurbished)
30-day returns, no restocking fee on unused parts
100% positive eBay feedback
Ships via

What is the B&R 8I74T401500.01P-1?

ACOPOSinverter P74, 3x 380 to 500 V, 15 kW, integrated EMC filter and brake chopper, shield plate included in delivery, POWERLINK interface

For revision information, see the following model numbers:

8I74T401500.010-1

8I0IF108.400-1

Specifications

General information

Certifications – CE	Yes
Certifications – UL	UL E225616; Power conversion equipment
Certifications – KC	Yes

Motor power

Specified on nameplate

15 kW (20 HP)

Mains connection

Mains current – At 380 VAC	47.3 A (note: Typical value for 4-pin motor and a max. clock frequency of 4 kHz, without mains choke for the max. assumed short circuit current (lsc).)
Mains current – At 500 VAC	33.3 A (note: Typical value for 4-pin motor and a max. clock frequency of 4 kHz, without mains choke for the max. assumed short circuit current (lsc).)
Mains input voltage	3x 380 VAC -15% to 500 VAC +10%
Frequency	50 to 60 Hz ±5%
Apparent power (at 500 VAC)	28.8 kVA
Max. assumed short-circuit current (Isc); (short-circuit current at connection point)	22 kA (note: With mains choke max. Isc 65 kA for 380/500 V.)
Inrush current	Max. 36.7 A (note: Peak current when switching on for maximum voltage (240 V +10% or 500 V +10%))
Power dissipation at nominal load and nominal clock frequency	480 W
Integrated EMC filter	Yes (note: Inverter is provided with an integrated Category C2 EMC filter. This filter can be switched off.)

Line-conducted and radiated emissions

With integrated filter – Motor cable length per IEC/EN 61800-3 ; Cat. C1 environment 1 (public power network)	-
With integrated filter – Motor cable length per IEC/EN 61800-3 ; Cat. C2 environment 1 (public power network)	C2 level of 4 to 12 kHz with 5 m cable
With integrated filter – Motor cable length per IEC/EN 61800-3 ; Cat. C3 environment 2 (industrial power system)	5 m
With add-on filter – Motor cable length per IEC/EN 61800-3 ; Cat. C1 environment 1 (public power network)	C1 level of 2 to 16 kHz with 5 m cable; C1 level of 2 to 8 kHz with 10 m cable; C1 level of 2 to 4 kHz with 20 m cable
With add-on filter – Motor cable length per IEC/EN 61800-3 ; Cat. C2 environment 1 (public power network)	C2 level of 2 to 16 kHz with 50 m cable; C2 level of 2 to 12 kHz with 100 m cable
With add-on filter – Motor cable length per IEC/EN 61800-3 ; Cat. C3 environment 2 (industrial power system)	50 m
With add-on filter	8I0FT049.200-1

Motor connection

Derating of continuous output current depending on ambient temperature – At nominal clock frequency (4 kHz)	No derating (up to 50°C)
Derating of continuous output current depending on ambient temperature – Other clock frequencies	The derating curves are included in the installation instructions, which can be downloaded from www.br-automation.com.
Derating of continuous output current depending on installation elevation – Starting at 1000 m above sea level	1%, per 100 m
Clock frequency – Min.	2 kHz
Clock frequency – Max.	16 kHz
Braking torque – With braking resistor	Up to 170% of the nominal motor torque
Max. motor cable length – Shielded cable	50 m
Max. motor cable length – Non-shielded cable	100 m
Motor control profiles – Induction motor	Sensorless vector control: ; 1. With V/f characteristic curve for constant torque; → Default profile; 2. With V/f characteristic curve for quadratically increasing torque; → Energy-saving profile, e.g. for fans and pumps; Sensorless slip control: ; 1. With V/f characteristic curve for constant torque; → Default profile; 2. With V/f characteristic curve for constant torque (6 f ranges); → Profile for individual special applications; 3. With V/f characteristic curve for quadratically increasing torque; → Energy-saving profile, e.g. for fans and pumps
Motor control profiles – Synchronous motor	Sensorless vector control: ; 1. With V/f characteristic curve for constant torque; → Default profile
Nominal output current	33 A (note: These values apply at a nominal clock frequency of 4 kHz during continuous operation. The clock frequency can be set from 2 to 16 kHz. Above 4 kHz, reduce the nominal drive current. The nominal motor current is not permitted to exceed this value.)
Max. transient current for 60 s	49.5 A
Max. transient current for 2 s	54.5 A
Output frequency range	0.1 to 599 Hz
Nominal clock frequency	4 kHz
Main protective functions of inverter	Thermal protection against power stage overheating; Protection against short circuits between motor phases, overcurrent between output phases and ground, overvoltages on the DC bus, exceeding the speed limit. Safety function for: Overvoltage and undervoltage of the mains supply, mains phase failure with 3-phase power supply

Brake chopper

Integrated dynamic brake transistors	Yes
Min. resistance value (external)	16 Ω

24 VDC power supply

Input voltage	24 VDC (-15%/+20%)
Current	Max. 1.1 A

Available internal power supplies

Output voltage 24 VDC – Max. output current at 24 VDC	100 mA
Output voltage 10 VDC – Max. output current at 10 VDC	10 mA
Output voltage 24 VDC	24 VDC (-15%/+20%)
Output voltage 10 VDC	10 VDC (-0%/+10%)

Interfaces

POWERLINK – Type

Type 2Communication / POWERLINK / General information / Hardware - CN" in Automation Help."> (note: For additional information, see section)

Digital inputs

Input circuit – Current consumption	7 mA
Electrical isolation – Input - ACOPOSinverter	Yes
Electrical isolation – Input - Input	No
Digital input 5 – Max. input frequency	20 kHz
Quantity	6 (note: 1 logic input can be programmed as a 20 kbps pulse input. 1 logic input is configurable as an input for a PTC sensor using a switch (SW2). Trigger resistance 3 kΩ, reset value 1.8 kΩ, short-circuit proof <50 Ω)
Nominal voltage	24 VDC (max. 30 V)
Input circuit	Source or sink
Sampling time	8 ms ±0.7 ms
Input impedance	3.5 kΩ

Safe input - STO (Safe Torque Off)

Input impedance – Current consumption	16 mA
Switching threshold – Low	<2 V
Switching threshold – High	>17 V
Electrical isolation – Input - ACOPOSinverter	Yes
Electrical isolation – Input - Input	No
Quantity	1
Nominal voltage	24 VDC
Input impedance	1.5 kΩ
Input circuit	Sink
Sampling time	4 ms

Analog inputs

Electrical isolation – Input - Input	No
Electrical isolation – Input - ACOPOSinverter	Yes
Input – Voltage	0 to 10 V, ±10 V
Input – Current	0 to 20 mA (or 4 to 20 mA)
Input impedance – Voltage	30 kΩ
Input impedance – Current	250 Ω
Quantity	3
Resolution	10-bit
Sampling time	2 ms

Digital outputs

Quantity	1
Nominal voltage	24 VDC
Max. voltage	30 VDC
Output circuit	Source or sink
Sampling time	2 ms
Max. current	100 mA

Relay outputs

Execution – Relay 1	1 changeover contact
Execution – Relay 2	1 normally open contact
Electrical isolation – Output - ACOPOSinverter	Yes
Electrical isolation – Output - Output	No
Quantity	2
Nominal voltage	30 VDC / 250 VAC
Switching capacity	R1, with resistive load (cos phi = 1): 3 A at 250 VAC, ; R1, with resistive load (cos phi = 1): 4 A at 30 VDC, ; R1, R2, with inductive load (cos = 0.4 and L/R = 7 ms): 2 A at 250 VAC, ; R1, R2, with inductive load (cos = 0.4 and L/R = 7 ms): 2 A at 30 VDC, ; R2 with resistive load (cos phi = 1): 5 A at 250 VAC, ; R2 with resistive load (cos phi = 1): 5 A at 30 VDC
Response time (max.)	2 ms

Analog outputs

Electrical isolation – Output - ACOPOSinverter	Yes
Electrical isolation – Output - Output	No
Max. load impedance – Voltage	470 Ω
Max. load impedance – Current	800 Ω
Quantity	1
Output	0 to 10 V or 0 to 20 mA
Update time	2 ms
Resolution	10-bit

Operating conditions

Degree of protection per EN 60529	IP20
Relative humidity per IEC 60068-2-3	5 to 95%. non-condensing; No dripping water
Maximum installation elevation	Up to 2000 m (note: Over 2000 m, load reduced by 1% per 100 m.)
Max. pollution degree per IEC/EN 61800-5-1	2 (non-conductive pollution)
Ambient conditions per IEC 60721-3-3	Class 3C3 and 3S3
Operating position	Vertical mounting orientation ±10%

Ambient conditions

Temperature – Operation	-10 to 50°C without derating; 50 to 60°C with derating
Temperature – Storage	-25 to 70°C
Max. vibration resistance	1 g n 13 to 200 Hz EN/IEC 60068-2-6; 1.5 mm peak to peak 3 to 13 Hz EN/IEC 60068-2-6

Mechanical properties

Dimensions – Width	180 mm (note: With shield plate)
Dimensions – Height	404 mm (note: With shield plate)
Dimensions – Height without shield plate	330 mm (note: With shield plate)
Dimensions – Depth	232 mm (note: With shield plate)
Weight	6.750 kg

Accessories

Optional accessories (4)

8I0XF074.040-1	Fans (spare part) — ACPi P66 fan 3-ph. 200…240 VAC: Power output class: 11 - 15 kW 3-ph. 380…500 VAC: Power output class: 11 - 15 kW 3-ph. 525…600 VAC: Power o…
8I0FT049.200-1	Optional EMC filters — 49 A EMC filter for ACOPOSinverter P76 and P74new (3-phase 380-500 V, 11-15 kW).
8I0BR028.000-1	Optional braking resistors — Braking resistor ohmic value: 28 Ω continuous braking power: 0.20 kW degree of protection (IP): IP20
8I0CT030.000-1	Optional line chokes — Mains choke 3-phase, 30 A, 50/60 Hz for ACOPOSinverter

Downloads & documentation

Official documents from B&R, downloaded directly from the manufacturer.

Data sheets & manuals

ACOPOSinverter P74 User's ManualPDF · 27 MB · 2.60 (01/14/2019) - EN

CAD & dimension drawings

Certificates (2)

8I74T401500.01P-1: frequently asked questions

When can 8I74T401500.01P-1 be shipped?

8I74T401500.01P-1 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up 8I74T401500.01P-1 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for 8I74T401500.01P-1 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 8I74T401500.01P-1, subject to availability and destination.