
SFP Module 1000BASE; SX Multi-Mode 850 nm LC; 0.55 km; Extended temperature range; Digital Diagnostics Monitoring; silver-colored
Industrial Managed Switch; 8 Ports 1000Base-T; 4-Slot 1000BASE-SX/LX; Extended temperature range; USB; black metallic
The configurable 852-1305/000-001 Industrial ETHERNET Switch is equipped with eight 10/100/1000BASE-T ports and four 1000BASE-SX/LX SFP ports (SFP modules are available as an option).
Packaged in a rugged housing, this switch offers both a redundant power supply and relay-based function monitoring. These functions, along with extensive ETHERNET switch options, make it ideal for a wide range of applications.
Features:
Web-based/SNMP management
Redundant DC power supply
Power supply range: 12 … 48 VDC
Diagnostics via Modbus® and SNMP
DIP switches to set alarm functions
Autonegotiation at all 10/100/1000Base-T ports
Auto‐MDI/MDIX (crossover) at all 10/100/1000Base‐T ports
IGMP snooping for multicast filtering
Port configuration, status, statistics
Port trunking
SNMP v1/v2c and RMON
Approval (IEC 61850-3) for the energy market
Firmware update and switch configuration via USB storage medium
| Switching mode | Store-and-forward; non-blocking |
| Number of 1 Gb/s ports | 8 |
| Number of 1 Gb/s ports SFP | 4 |
| Communication standards | IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX, IEEE 802.3x Flow Control, IEEE 802.1d Spanning Tree Protocol (STP), IEEE 802.1w Rapid Spanning Tree Protocol (RSTP), IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), IEEE 802.1Q VLAN Tagging, IEEE 802.1p Prioritization, IEEE 802.1x Port Authentication, IEEE 802.1ab Link Layer Discovery Protocol (LLDP), IEEE 802.3ad Link Aggregation, ITU-T G8032v1/v2 Ethernet Ring Protection Switching (ERPS) |
| Redundancy function | Redundant DC power supply; STP; RSTP; MSTP; Jet Ring < 300 ms; Xpress Ring < 20 ms; Dual Homing < 20 ms; Dual Ring; ERPSv2 < 50 ms; LACP |
| Configuration options | DIP switch for signal contact, Web-Based Management, Command Line Interface, SNMPv1/v2c/v3, USB storage medium |
| Diagnostics | Signal contact; Modbus TCP; Port status; Port statistics; Port load; Traffic monitor; SFP information; Syslog; Mail alarm; SNMP traps; Loop detection; …, Alarm contact; Alarm relay; NO; 1 A at 24 VDC |
| MAC table (size) | 16000 addresses |
| Jumbo frame size | 10000. Byte |
| Supply voltage | 12 … 48 VDC; 24 VDC (DNV GL); 24, 48 VDC (LR) |
| Power consumption (max.) | 18 W |
| Current consumption (max.) | 1500 mA |
| ESD (contact/air discharge) | 8 KV / 15 KV |
| Transmission rate | Copper cable: 10/1000 Mbit/s; Fiber optic:1000 Mbit/s |
| Transmission medium (communication/fieldbus) | Copper cable: Cat. 5e or higher, 100 m maximum cable length; Fiber optic: SX Multi-Mode, LX Single-Mode |
| Optical fiber type | Single-Mode and Multi-Mode |
| VLAN | Port-based and tag-based (4k VIDs) |
| Control Elements | 2 x DIP switch: Alarm function power supplies |
| Indicators | Device: LED (PWR, RPS, POST) green: power supply (primary), redundant power supply (secondary), POST function; LED (ALM) red: Alarm; LED (SFP) green, Status fiber optic ports; per port: LED (100, LNK/ACT) green: Status 100 Mbps, LNK/ACT ports 1 … 8 |
| Connection technology: communication/fieldbus | Copper cable: 8 x RJ-45; Fiber optic: 4 x SFP slots (e.g., with SFP module and LC fiber-optic connector) |
| Connection technology: supply | 1 x Built-in male connector: 231-436/001-000; included female connector (MCS Connectors): 2231-106/026-000 |
| Width | 50 mm / 1.969 inches |
| Height | 162 mm / 6.378 inches |
| Depth | 120 mm / 4.724 inches |
| Weight | 855 g |
| Color | black metallic |
| Housing material | Aluminum |
| Conformity marking | CE |
| Ambient temperature (operation) | -40 … +70 °C (-40 … +70 °C (CE); -25 … +70 °C (DNV GL); +5 … +70 °C (LR)) |
| Ambient temperature (storage) | -40 … +80 °C |
| Protection type | IP30 |
| Note on protection type | Use per UL 61010: Indoor |
| Pollution degree | 2 per UL 61010 |
| Relative humidity (without condensation) | 95 % |
| Mounting type | DIN-35 rail |
| Vibration resistance | Per IEC 60068-2-6 |
| Shock resistance | per IEC 60068-2-27 |
| EMC immunity to interference | per EN 61000-6-2 |
| EMC emission of interference | per EN 61000-6-4 |
| Fire load | 0.235 MJ |
| PU (SPU) | 1 pcs |
| Packaging type | box |
| Country of origin | TW |
| GTIN | 4055143898133 |
| Customs tariff number | 85176200000 |
| UNSPSC | 43222612 |
| ETIM 9.0 | EC000734 |
| ETIM 10.0 | EC000734 |
| ECCN | 5A992.C |
| RoHS Compliance Status | Compliant,No Exemption |
No matching specifications
852-1305/000-001 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Yes — mention it when you request a quote for 852-1305/000-001 and we'll include express shipping options in our reply.
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 852-1305/000-001, subject to availability and destination.

SFP Module 1000BASE; SX Multi-Mode 850 nm LC; 0.55 km; Extended temperature range; Digital Diagnostics Monitoring; silver-colored

SFP Module 1000BASE; LX Single-Mode 1310 nm LC; 10 km; Extended temperature range; Digital Diagnostics Monitoring; silver-colored

SFP Module 1000BASE; ZX Single-Mode 1550 nm LC; 80 km; Extended temperature range; Digital Diagnostics Monitoring; silver-colored




Industrial-ECO-Switch; 5-port 1000Base-T; Extended temperature range; 4 * Power over Ethernet

Industrial-ECO-Switch; 5-port 1000Base-T; 4 * Power over Ethernet; Extended temperature range