Schneider Electric LXM15LD21M3 – motion servo drive LXM15L - 1.2 kW - 200..240 V - with EMC filter

Name: Schneider Electric LXM15LD21M3 – motion servo drive LXM15L - 1.2 kW - 200..240 V - with EMC filter
Brand: Schneider Electric
SKU: LXM15LD21M3

MPN: LXM15LD21M3 · Brand: Schneider Electric

Price on request

Discontinued by Schneider Electric — we can still source the original LXM15LD21M3 (new, used or refurbished, subject to availability). Request a quote below.

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	Lexium 15
Lifecycle	Discontinued
Warranty	12-month (new) · 3-month (used/refurbished)
UPC / EAN	3389119210591
Datasheet	Manufacturer datasheet ↗

Shipping & availability

Can I still buy the LXM15LD21M3 now that it is discontinued?

Yes. Schneider Electric has discontinued the LXM15LD21M3, but sourcing discontinued parts is what PartnerPLC specialises in — new old stock, used and refurbished units. Request a quote and we'll confirm availability, condition and lead time.

When can LXM15LD21M3 be shipped?

LXM15LD21M3 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up LXM15LD21M3 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for LXM15LD21M3 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for LXM15LD21M3, subject to availability and destination.

Schneider Electric LXM15LD21M3 — motion servo drive LXM15L - 1.2 kW - 200..240 V - with EMC filter (Lexium 15). Discontinued by Schneider Electric. PartnerPLC sources discontinued and surplus Schneider Electric automation parts — request a quote for price, condition and lead time.

Specifications

Main

Range of product	Lexium 15
Product or component type	Motion servo drive
Component name	LXM15L
Network number of phases	Single phase; Three phase
power supply voltage	200...240 V - 15...10 %
EMC filter	Integrated
Continuous output current	4 A single phase; 6 A three phase
transient RMS output current	15 A for 2 s three phase; 9 A for 2 s single phase
Peak output current	13 A single phase; 21 A three phase
Nominal power	1.2 kW single phase; 2.1 kW three phase
Line current	10.1 A at 200 V single phase; 8.6 A at 240 V three phase; 8.8 A at 200 V three phase; 9.9 A at 240 V single phase
Apparent power	2.4 kVA
Earthing system	Compatible TN; Compatible IT with additional isolation transformer on the power supply; Compatible TT

Complementary

power supply voltage limits	170…264 V
power supply frequency	50/60 Hz - 5...5 %
power supply frequency limits	47.5…63 Hz
Switching frequency	8 kHz
Output voltage	<= power supply voltage
Electrical isolation	Between power and control
Electrical connection	Spring terminal, clamping capacity: 2.5 mm², 14 AWG (+ 24 VDC, 0 VDC); Terminal, clamping capacity: 1.5 mm², 14 AWG (PA/+, PC/-, PBi, PBe); Terminal, clamping capacity: 1.5 mm², 14 AWG (R/L1, S/L2, T/L3); Spring terminal, clamping capacity: 0.5 mm², 20 AWG (R1A, R1C, LI1, LI2, LI3, LI4, ENABLE, LO1, LO2, PWR, AI1+/AI1-, AI2+/AI2-)
Tightening torque	PA/+, PC/-, PBi, PBe: 0.6 N.m; R/L1, S/L2, T/L3: 0.6 N.m
Protection type	Against reverse polarity: inputs signal; Against short-circuits: outputs signal
Discrete input number	1 safety discrete input(s); 5 logic including ENABLE discrete input(s)
Discrete input type	Logic (LI1, LI2, LI3, LI4, ENABLE terminals); Safety (PWR terminals)
input sampling time	AI1+/AI1-, AI2+/AI2: 0.0625 ms analog; LI1, LI2, LI3, LI4: 0.25 ms discrete
Discrete input voltage	20...30 V DC for logic; 24 V DC for safety
Discrete input logic	Positive logic (sink) state 0 if < 5 V or input not wired state 1 if > 11 V for logic; Positive logic (sink) state 0 if < 5 V or input not wired state 1 if > 15 V for safety PWR function active at state 0
Safety input response time	<= 1.5 ms
Discrete output number	1 for relay; 2 for logic
Discrete output type	Logic LO1, LO2; Relay R1A, R1C NO
Discrete output voltage	24 V DC <= 30 V
Discrete output logic	Positive logic (source)
Analogue input number	2
Analogue input type	AI1+/AI1- : analog input differential +/- 10 V, resolution 14 bits, input impedance 20000 Ohm; AI2+/AI2- : analog input differential +/- 10 V, resolution 12 bits, input impedance 20000 Ohm
output response time	Discrete LO1, LO2 0.25 ms; Discrete R1A, R1C <= 4 ms
Analogue output number	0
Breaking capacity	0.00001 kA logic
relay output maximum switching current	R1A, R1C on resistive load 500 mA for 125 V AC, cos phi = 1; R1A, R1C on resistive load 500 mA for 30 V DC, cos phi = 1
Protection type	Against short-circuit outputs signal; Against reverse polarity inputs signal
Feedback type	1 encoder feedback input, 15-way female SUB-D connector (X1); 1 resolver feedback input, 9-way female SUB-D connector (X2)
feedback power supply	Encoder: 10 V DC, 100 mA; Resolver: 4.75 V AC, <= 35 mA
feedback input signal	Encoder: 1 V with 2.5 V offset; Resolver: 7 V DC +/- 10 %; Encoder: 0.5 V at 100 kHz
Control signal type	1 ESIM (Encoder SIMulation) output, 9-way female SUB-D connector (X5); 1 pulse/direction or A/B encoder input, 9-way female SUB-D connector (X5); RS422 and RS485 link compatible input; RS422 and RS485 link compatible output
Control signal frequency	A/B encoder input <= 1.5 MHz; ESIM output <= 1.5 MHz; Pulse direction input <= 100 kHz
Communication port protocol	CANopen; RS232 serial link
Connector type	1 common for both CANopen and RX 232 9-way male SUB-D connector (X6)
Method of access	Slave CANopen, CANopen Motionbus
Transmission rate	1 Mbps <20 m; 125 kbps <115 m
Number of addresses	1…127
Communication service	1 configurable mapping PDO for CANopen; 3 PDO (position control and speed profile modes) for CANopen; ASCII command for RS232
Safety function	PWR protection of machine:stops or prevents unintended operation of servo motor conforming to IEC/EN 61800-5-2; PWR protection of machine:stops or prevents unintended operation of servo motor conforming to ISO 13849-1 level d
Marking	CE
Sampling repetition time	Position control loop: 250 µs; Speed control loop: 250 µs; Torque control loop: 62.5 µs
Type of cooling	Fan
Operating position	Vertical +/- 10 degree
Net weight	2.6 kg

Environment

Electromagnetic compatibility	Conducted and radiated emissions conforming to EN 55011 class A group 1 (cable length: 10 m); Conducted and radiated emissions conforming to EN 55011 class A group 2 (cable length: 25 m); Conducted and radiated emissions conforming to EN 55011 class A group 2 (cable length: 50 m); Conducted and radiated emissions conforming to EN/IEC 61800-3 environment 1 category C2 (cable length: 10 m); Conducted and radiated emissions conforming to EN/IEC 61800-3 environment 2 category C3 (cable length: 25 m); Conducted and radiated emissions conforming to EN/IEC 61800-3 environment 2 category C3 (cable length: 50 m); EMC immunity conforming to EN/IEC 61000-6-2 level 3; EMC immunity conforming to IEC/EN 61000-6-1 level 3
Standards	EN/IEC 61439-1; EN 292; EN/IEC 60204-1; EN/IEC 50178
Product certifications	cUL; UL
IP degree of protection	IP20
Vibration resistance	1 gn (f= 57…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 10…57 Hz) conforming to EN/IEC 60068-2-6
Shock resistance	4 gn for 22 ms conforming to EN/IEC 60068-2-27
Pollution degree	2 conforming to IEC 60664-1
Environmental characteristic	Category 3C1 conforming to IEC 60721-3-3
Relative humidity	Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
Ambient air temperature for operation	40…55 °C (with derating of the motor output current by 2.5 % per °C); 0…40 °C (without derating)
Ambient air temperature for storage	-25…70 °C
Operating altitude	<= 1000 m without derating; > 1000...2000 m with derating of the motor output current by 1.5 % per additional 100 m