Schneider Electric ATV71HU40S6X

Variable speed drive ATV71 - 4kW-5HP - 600V - w/o EMC filter-graphic terminal

MPN
ATV71HU40S6X
EAN
3606480283383
Category
Altivar 71
Price and lead time confirmed within 1 business day

Discontinued by Schneider Electric — we can still source the original ATV71HU40S6X (new, used or refurbished, subject to availability). Request a quote below.

Request a Quote
  1. 1We check stock, condition and lead time
  2. 2You get a written quote by email
  3. 3Approve it and we ship — in-stock parts within 1 business day

A real person replies, typically within 1 business day — see our privacy policy.

  • 12-month warranty (new) · 3-month (used/refurbished)
  • 30-day returns, no restocking fee on unused parts
  • 100% positive eBay feedback
  • Ships via

Have spare Schneider Electric parts? We buy surplus →

What is the Schneider Electric ATV71HU40S6X?

Schneider Electric ATV71HU40S6X — variable speed drive ATV71 - 4kW-5HP - 600V - w/o EMC filter-graphic terminal (Altivar 71). Discontinued by Schneider Electric. PartnerPLC sources discontinued and surplus Schneider Electric automation parts — request a quote for price, condition and lead time.

Specifications

Main

Range of productAltivar 71
Product or component typeVariable speed drive
Product specific applicationComplex, high-power machines
Component nameATV71
Motor power kW4 kW, 3 phases at 500 V
Motor power hp5 hp, 3 phases at 575 V
Maximum motor cable length30 m shielded cable; 50 m unshielded cable
power supply voltage500...600 V - 15...10 %
Network number of phases3 phases
Line current12.5 A for 500 V 3 phases 4 kW / 5 hp; 10.9 A for 600 V 3 phases 4 kW / 5 hp
EMC filterWithout EMC filter
Assembly styleWith heat sink
VariantBuilt-in unit with forced cooling
Prospective line Isc22 kA for 3 phases
Nominal output current7.5 A at 4 kHz 500 V 3 phases 4 kW / 5 hp; 6.1 A at 4 kHz 575 V 3 phases 4 kW / 5 hp
Maximum transient current11.3 A for 60 s 3 phases 4 kW / 5 hp; 12.4 A for 2 s 3 phases 4 kW / 5 hp
Output frequency0.1…500 Hz
Nominal switching frequency4 kHz
Switching frequency2.5...6 kHz adjustable; 4...6 kHz with derating factor
Asynchronous motor control profileFlux vector control without sensor, standard; Voltage/frequency ratio, 5 points; Flux vector control without sensor, ENA (energy Adaptation) system; Voltage/frequency ratio - Energy Saving, quadratic U/f; Flux vector control with sensor, standard; Voltage/frequency ratio, 2 points; Flux vector control without sensor, 2 points
Type of polarizationNo impedance for Modbus

Complementary

Product destinationAsynchronous motors; Synchronous motors
power supply voltage limits425…660 V
power supply frequency50...60 Hz +/-5 %
power supply frequency limits47.5...63 Hz
Speed range1…100 in open-loop mode, without speed feedback
Speed accuracy+/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
Torque accuracy+/- 15 % in open-loop mode, without speed feedback
Transient overtorque220 % of nominal motor torque +/- 10 % for 2 s; 170 % of nominal motor torque +/- 10 % for 60 s
Braking torque30 % without braking resistor; <= 125 % with braking resistor
Synchronous motor control profileVector control without sensor, standard; Vector control with sensor, standard
Regulation loopFrequency PI regulator
Motor slip compensationAutomatic whatever the load; Adjustable; Not available in voltage/frequency ratio (2 or 5 points); Can be suppressed
diagnosticLCD display unit for operation function, status and configuration
Output voltage<= power supply voltage
InsulationElectrical between power and control
type of cable for mounting in an enclosureWith an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC; Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC; Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR; With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
Electrical connectionTerminal, clamping capacity: 2.5 mm², AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR); Terminal, clamping capacity: 16 mm², AWG 4 (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
Tightening torque0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR); 3 N.m, 26.5 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
SupplyInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection; Internal supply: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection; External supply: 24 V DC (19…30 V)
Analogue input number2
Analogue input typeAI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign; AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits; AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits
input sampling time2 ms +/- 0.5 ms (AI1-/Al1+) - analog input(s); 2 ms +/- 0.5 ms (Al2) - analog input(s); 2 ms +/- 0.5 ms (LI1...LI5) - discrete input(s); 2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input(s); 2 ms +/- 0.5 ms (AO1) - analog input(s)
Response time<= 100 ms in STO (Safe Torque Off); R1A, R1B, R1C <= 7 ms, tolerance +/- 0.5 ms; R2A, R2B <= 7 ms, tolerance +/- 0.5 ms
absolute accuracy precision+/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C; +/- 0.6 % (AI2) for a temperature variation 60 °C; +/- 1 % (AO1) for a temperature variation 60 °C
Linearity error+/- 0.2 % (AO1); +/- 0.15 % of maximum value (AI1-/Al1+); +/- 0.15 % of maximum value (AI2)
Analogue output number1
Analogue output typeAO1 software-configurable logic output 10 V 20 mA; AO1 software-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits; AO1 software-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits
Discrete output number2
Discrete output typeConfigurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles; Configurable relay logic: (R2A, R2B) NO - 100000 cycles
Minimum switching current3 mA at 24 V DC for configurable relay logic
Maximum switching currentR1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4; R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4; R1, R2: 5 A at 250 V AC resistive load, cos phi = 1; R1, R2: 5 A at 30 V DC resistive load, cos phi = 1
Discrete input number7
Discrete input typeLI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm; LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm; LI6: switch-configurable PTC probe 0…6, impedance: 1500 Ohm; PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
Discrete input logicNegative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1); Positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1); Negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1); Positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1); Positive logic (source) (PWR), < 2 V (state 0), > 17 V (state 1)
Acceleration and deceleration rampsLinear adjustable separately from 0.01 to 9000 s; Automatic adaptation of ramp if braking capacity exceeded, by using resistor; S, U or customized
Braking to standstillBy DC injection
Protection typeAgainst exceeding limit speed: drive; Against input phase loss: drive; Break on the control circuit: drive; Input phase breaks: drive; Line supply overvoltage: drive; Line supply undervoltage: drive; Overcurrent between output phases and earth: drive; Overheating protection: drive; Overvoltages on the DC bus: drive; Short-circuit between motor phases: drive; Thermal protection: drive; Motor phase break: motor; Power removal: motor; Thermal protection: motor; Power removal: drive
Insulation resistance> 1 mOhm 500 V DC for 1 minute to earth
Frequency resolutionAnalog input: 0.024/50 Hz; Display unit: 0.1 Hz
Communication port protocolCANopen; Modbus
Connector type1 RJ45 (on front face) for Modbus; 1 RJ45 (on terminal) for Modbus; 1 RJ45 for CANopen
Physical interface2-wire RS 485 for Modbus
Transmission frameRTU for Modbus
Transmission rate4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal; 9600 bps, 19200 bps for Modbus on front face; 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
Data format8 bits, 1 stop, even parity for Modbus on front face; 8 bits, odd even or no configurable parity for Modbus on terminal
Number of addresses1…127 for CANopen; 1…247 for Modbus
Method of accessSlave CANopen
MarkingCE
Operating positionVertical +/- 10 degree
Height295 mm
Depth213 mm
Width210 mm
Net weight7.5 kg
Option cardCommunication card for CC-Link; Controller inside programmable card; Communication card for DeviceNet; Communication card for EtherNet/IP; Communication card for Fipio; I/O extension card; Communication card for Interbus-S; Communication card for Modbus Plus; Communication card for Modbus TCP; Communication card for Modbus/Uni-Telway; Communication card for Profibus DP; Communication card for Profibus DP V1; Communication card for LonWorks; Communication card for METASYS N2; Communication card for APOGEE FLN; Communication card for BACnet

Environment

Noise level60.2 dB conforming to 86/188/EEC
Dielectric strength5092 V DC between control and power terminals; 3800 V DC between earth and power terminals
Electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
StandardsEN 55011 group 1 class B; IEC 60721-3-3 class 3C1; IEC 61800-3; UL Type 1; EN/IEC 61800-3 environment 2; IEC 61800-3 environment 1; IEC 61800-5-1; IEC 60721-3-3 class 3S2
Product certificationsC-Tick; GOST; CSA; NOM 117; UL
Pollution degree3 conforming to UL 840; 3 conforming to IEC 61800-5-1
IP degree of protectionIP20 on upper part without blanking plate on cover conforming to IEC 60529; IP20 on upper part without blanking plate on cover conforming to IEC 61800-5-1; IP21 conforming to IEC 60529; IP21 conforming to IEC 61800-5-1; IP41 on upper part conforming to IEC 60529; IP41 on upper part conforming to IEC 61800-5-1; IP54 on lower part conforming to IEC 60529; IP54 on lower part conforming to IEC 61800-5-1
Vibration resistance1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity5…95 % without condensation conforming to IEC 60068-2-3; 5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation-10…50 °C (without derating); 50…60 °C (with derating factor)
Ambient air temperature for storage-25…70 °C
Operating altitude<= 1000 m without derating; 1000...2260 m with current derating 1 % per 100 m

Downloads & documentation

Official documents from Schneider Electric, downloaded directly from the manufacturer.

Data sheets & manuals

ATV71HU40S6X: frequently asked questions

Can I still buy the ATV71HU40S6X now that it is discontinued?

Yes. Schneider Electric has discontinued the ATV71HU40S6X, but sourcing discontinued parts is what PartnerPLC specialises in — new old stock, used and refurbished units. Request a quote and we'll confirm availability, condition and lead time.

When can ATV71HU40S6X be shipped?

ATV71HU40S6X is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up ATV71HU40S6X in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for ATV71HU40S6X and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for ATV71HU40S6X, subject to availability and destination.

More Schneider Electric parts

Schneider Electric ATV71HU40N4S337 – Variable speed drive ATV71 - 4kW-5HP - 480V - EMC filter-graphic terminal
Schneider Electric
ATV71HU40N4S337

Variable speed drive ATV71 - 4kW-5HP - 480V - EMC filter-graphic terminal

Schneider Electric ATV71HU40N4Z – Variable speed drive, ATV71, 4kW, 5HP, 380 to 480V, 54.5dB, EMC filter, without graphic terminal, CANopen, Modbus, wear part
Schneider Electric
ATV71HU40N4Z

Variable speed drive, ATV71, 4kW, 5HP, 380 to 480V, 54.5dB, EMC filter, without graphic terminal, CANopen, Modbus, wear part

Schneider Electric ATV71HU40N4Z304 – ATV71 - 480V - 4KW - 5HP - EMC WO GRAPHIC TERM.
Schneider Electric
ATV71HU40N4Z304

ATV71 - 480V - 4KW - 5HP - EMC WO GRAPHIC TERM.

Schneider Electric ATV71HU40N4Z383 – ATV71 480V 4KW 5HP permanent magnet synchronous
Schneider Electric
ATV71HU40N4Z383

ATV71 480V 4KW 5HP permanent magnet synchronous

Schneider Electric ATV71HU40Y – Variable speed drive ATV71 - 4kW - 690V - EMC filter-graphic terminal
Schneider Electric
ATV71HU40Y

Variable speed drive ATV71 - 4kW - 690V - EMC filter-graphic terminal

Schneider Electric ATV71HU55M3 – Variable speed drive ATV71 - 5.5kW-7.5HP - 240V - EMC filter-graphic terminal
Schneider Electric
ATV71HU55M3

Variable speed drive ATV71 - 5.5kW-7.5HP - 240V - EMC filter-graphic terminal

Schneider Electric ATV71HU55M3383 – Variable speed drive ATV71 - 4kW-5HP - 240V - EMC filter-graphic terminal
Schneider Electric
ATV71HU55M3383

Variable speed drive ATV71 - 4kW-5HP - 240V - EMC filter-graphic terminal

Schneider Electric ATV71HU55M3S337 – Variable speed drive ATV71 - 5.5kW-7.5HP - 240V - EMC filter-graphic terminal
Schneider Electric
ATV71HU55M3S337

Variable speed drive ATV71 - 5.5kW-7.5HP - 240V - EMC filter-graphic terminal

Schneider Electric ATV71HU40S6XPrice and lead time confirmed within 1 business day
Request a Quote