Schneider Electric ATV71E5075N4

Variable speed drive ATV71 - 0.75kW 1HP - 480V - EMC filter - IP54

MPN
ATV71E5075N4
EAN
3389119213295
Category
Altivar 71
Price and lead time confirmed within 1 business day

Discontinued by Schneider Electric — we can still source the original ATV71E5075N4 (new, used or refurbished, subject to availability). Request a quote below.

Request a Quote
  1. 1We check stock, condition and lead time
  2. 2You get a written quote by email
  3. 3Approve it and we ship — in-stock parts within 1 business day

A real person replies, typically within 1 business day — see our privacy policy.

  • 12-month warranty (new) · 3-month (used/refurbished)
  • 30-day returns, no restocking fee on unused parts
  • 100% positive eBay feedback
  • Ships via

Have spare Schneider Electric parts? We buy surplus →

What is the Schneider Electric ATV71E5075N4?

Schneider Electric ATV71E5075N4 — variable speed drive ATV71 - 0.75kW 1HP - 480V - EMC filter - IP54 (Altivar 71). Discontinued by Schneider Electric; the manufacturer's successor is ATV950U07N4E. PartnerPLC sources discontinued and surplus Schneider Electric automation parts — request a quote for price, condition and lead time.

Specifications

Main

Range of productAltivar 71
Product or component typeVariable speed drive
Product specific applicationComplex, high-power machines
Component nameATV71
Motor power kW0.75 kW
Motor power hp1 hp
power supply voltage380...480 V - 15...10 %
Network number of phases3 phases
Line current3 A at 480 V; 3.7 A at 380 V
EMC filterClass A EMC filter; Integrated
Assembly styleEnclosed with Vario switch disconnector
VariantWith EMC plate
Apparent power2.4 kVA at 380 V
Maximum transient current3.5 A for 60 s; 3.8 A for 2 s
Speed drive output frequency0…1600 Hz
Nominal switching frequency4 kHz
Switching frequency1...16 kHz adjustable; 4...16 kHz with derating factor
Asynchronous motor control profileVoltage/frequency ratio (2 or 5 points); Flux vector control (FVC) with sensor (current vector); ENA (Energy adaptation) system for unbalanced loads; Sensorless flux vector control (SFVC) (voltage or current vector)
Type of polarizationNo impedance for Modbus

Complementary

Product destinationSynchronous motors; Asynchronous motors
power supply voltage limits323…528 V
power supply frequency50...60 Hz +/- 5 %
power supply frequency limits47.5…63 Hz
Prospective line Isc5 kA
Continuous output current2.1 A at 4 kHz, 460 V; 2.3 A at 4 kHz, 380 V
Speed range1…100 for asynchronous motor in open-loop mode, without speed feedback; 1…1000 for asynchronous motor in closed-loop mode with encoder feedback; 1…50 for synchronous motor in open-loop mode, without speed feedback
Speed accuracy+/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn; +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
Torque accuracy+/- 15 % in open-loop mode, without speed feedback; +/- 5 % in closed-loop mode with encoder feedback
Transient overtorque170 % of nominal motor torque +/- 10 % for 60 s; 220 % of nominal motor torque +/- 10 % for 2 s
Braking torque<= 150 % with braking or hoist resistor; 30 % without braking resistor
Synchronous motor control profileVector control without speed feedback
Regulation loopAdjustable PI regulator
Motor slip compensationNot available in voltage/frequency ratio (2 or 5 points); Suppressable; Adjustable; Automatic whatever the load
diagnostic1 LED (red) for drive voltage
Output voltage<= power supply voltage
InsulationElectrical between power and control
type of cable for mounting in an enclosureWith an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC; With NEMA Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC; Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC; Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
Electrical connectionTerminal, clamping capacity: 2.5 mm², 14 AWG (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR); Terminal, clamping capacity: 10 mm², 6 AWG (L1/R, L2/S, L3/T); Terminal, clamping capacity: 4 mm², 8 AWG (U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
Tightening torque0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR); 2.1 N.m, 18.3 lb.in (L1/R, L2/S, L3/T); 1.4 N.m, 12.3 lb.in (U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB)
SupplyInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection; Internal supply: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Analogue input number2
Analogue input typeAI1-/Al1+ bipolar differential voltage: +/- 10 V DC, resolution 11 bits + sign; AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits; AI2 software-configurable voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 11 bits
input sampling timeAI1-/Al1+2 ms, +/- 0.5 ms for analog input(s); Al22 ms, +/- 0.5 ms for analog input(s); LI1...LI52 ms, +/- 0.5 ms for discrete input(s); LI6 (if configured as logic input) 2 ms, +/- 0.5 ms for discrete input(s)
Response time<= 100 ms in STO (Safe Torque Off); AO1 2 ms, tolerance +/- 0.5 ms for analog output(s); R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s); R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)
absolute accuracy precision+/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C; +/- 0.6 % (AI2) for a temperature variation 60 °C; +/- 1 % (AO1) for a temperature variation 60 °C
Linearity error+/- 0.15 % of maximum value (AI1-/Al1+, AI2); +/- 0.2 % (AO1)
Analogue output number1
Analogue output typeAO1 software-configurable logic output 10 V 20 mA; AO1 software-configurable current 0...20 mA, impedance: 500 Ohm; AO1 software-configurable voltage 0...10 V DC, impedance: 470 Ohm
Discrete output number2
Discrete output typeConfigurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles; Configurable relay logic: (R2A, R2B) NO - 100000 cycles
Minimum switching current3 mA at 24 V DC for configurable relay logic
Maximum switching current2 A at 250 V AC on inductive load - cos phi = 0.4 (R1, R2); 2 A at 30 V DC on inductive load - cos phi = 0.4 (R1, R2); 5 A at 250 V AC on resistive load - cos phi = 1 (R1, R2); 5 A at 30 V DC on resistive load - cos phi = 1 (R1, R2)
Discrete input number7
Discrete input typeProgrammable (LI1...LI5)24 V DC, with level 1 PLC - 3500 Ohm; Switch-configurable (LI6)24 V DC, with level 1 PLC - 3500 Ohm; Switch-configurable PTC probe (LI6) - 0…6 probes - 1500 Ohm; Safety input (PWR)24 V DC - 1500 Ohm
Discrete input logicNegative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1); Positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1); Negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1); Positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1)
Acceleration and deceleration rampsLinear adjustable separately from 0.01 to 9000 s; Automatic adaptation of ramp if braking capacity exceeded, by using resistor; S, U or customized
Braking to standstillBy DC injection
Protection typeAgainst exceeding limit speed: drive; Against input phase loss: drive; Break on the control circuit: drive; Input phase breaks: drive; Line supply overvoltage: drive; Line supply undervoltage: drive; Overcurrent between output phases and earth: drive; Overheating protection: drive; Overvoltages on the DC bus: drive; Short-circuit between motor phases: drive; Thermal protection: drive; Input phase breaks: motor; Power removal: motor; Thermal protection: motor
Insulation resistance> 1 mOhm 500 V DC for 1 minute to earth
Frequency resolutionAnalog input: 0.024/50 Hz; Display unit: 0.1 Hz
Communication port protocolCANopen; Modbus
Connector type1 RJ45 (on front face) for Modbus; 1 RJ45 (on terminal) for Modbus; Male SUB-D 9 on RJ45 for CANopen
Physical interface2-wire RS 485 for Modbus
Transmission frameRTU for Modbus
Transmission rate4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal; 9600 bps, 19200 bps for Modbus on front face; 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
Data format8 bits, 1 stop, even parity for Modbus on front face; 8 bits, odd even or no configurable parity for Modbus on terminal
Number of addresses1…127 for CANopen; 1…247 for Modbus
Method of accessSlave CANopen
MarkingCE
Operating positionVertical +/- 10 degree
Height490 mm
Width240 mm
Depth296 mm
Net weight14.4 kg
Option cardCommunication card for CC-Link; Controller inside programmable card; Communication card for DeviceNet; Communication card for EtherNet/IP; Communication card for Fipio; I/O extension card; Communication card for Interbus-S; Interface card for encoder; Communication card for Modbus Plus; Communication card for Modbus TCP; Communication card for Modbus/Uni-Telway; Overhead crane card; Communication card for Profibus DP; Communication card for Profibus DP V1

Environment

Noise level43 dB conforming to 86/188/EEC
Dielectric strength3535 V DC between earth and power terminals; 5092 V DC between control and power terminals
Electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
StandardsEN/IEC 61800-5-1; UL Type 12; IEC 60721-3-3 class 3C2; EN 55011 class A group 1; EN 61800-3 environments 2 category C2; EN 61800-3 environments 1 category C2; EN/IEC 61800-3
Product certificationsNOM 117; CSA; UL; C-Tick; GOST
Pollution degree2 conforming to EN/IEC 61800-5-1; 3 conforming to UL 840
IP degree of protectionIP54
Vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity5…95 % without condensation conforming to IEC 60068-2-3; 5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for operation-10…50 °C (without derating)
Ambient air temperature for storage-25…70 °C
Operating altitude<= 1000 m without derating; 1000...3000 m with current derating 1 % per 100 m

Downloads & documentation

Official documents from Schneider Electric, downloaded directly from the manufacturer.

Data sheets & manuals

ATV71E5075N4: frequently asked questions

Can I still buy the ATV71E5075N4 now that it is discontinued?

Yes. Schneider Electric has discontinued the ATV71E5075N4, but sourcing discontinued parts is what PartnerPLC specialises in — new old stock, used and refurbished units. Request a quote and we'll confirm availability, condition and lead time. If you are planning an upgrade instead, Schneider Electric names the ATV950U07N4E as its successor — we can quote both.

When can ATV71E5075N4 be shipped?

ATV71E5075N4 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up ATV71E5075N4 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for ATV71E5075N4 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for ATV71E5075N4, subject to availability and destination.

More Schneider Electric parts

Schneider Electric ATV68FC23N4 – Adjustable speed drive ATV-68F with heat sink - 160 kW - without EMC filter
Schneider Electric
ATV68FC23N4

Adjustable speed drive ATV-68F with heat sink - 160 kW - without EMC filter

Schneider Electric ATV68FC28N4 – Adjustable speed drive ATV-68F with heat sink - 200 kW - without EMC filter
Schneider Electric
ATV68FC28N4

Adjustable speed drive ATV-68F with heat sink - 200 kW - without EMC filter

Schneider Electric ATV68FC33N4 – Adjustable speed drive ATV-68F with heat sink - 250 kW - without EMC filter
Schneider Electric
ATV68FC33N4

Adjustable speed drive ATV-68F with heat sink - 250 kW - without EMC filter

Schneider Electric ATV6B0C80Q6 – Variable speed drive, Altivar Process ATV600, APM, Low Harmonic 690 V, 800 kW
Schneider Electric
ATV6B0C80Q6

Variable speed drive, Altivar Process ATV600, APM, Low Harmonic 690 V, 800 kW

Schneider Electric ATV71E5C13N4 – ATV71 ENCLOSED IP54 480V 132 kW 200 HP EMC
Schneider Electric
ATV71E5C13N4

ATV71 ENCLOSED IP54 480V 132 kW 200 HP EMC

Schneider Electric ATV71E5C16N4 – ATV71 ENCLOSED IP54 480V 160 kW 250 HP EMC
Schneider Electric
ATV71E5C16N4

ATV71 ENCLOSED IP54 480V 160 kW 250 HP EMC

Schneider Electric ATV71E5C25N4F – ATV71 ENCLOSURE IP54 480V 250KW with breaking resistor
Schneider Electric
ATV71E5C25N4F

ATV71 ENCLOSURE IP54 480V 250KW with breaking resistor

Schneider Electric ATV71E5D11N4 – Variable speed drive ATV71 - 11kW 15HP - 480V - EMC filter - IP54
Schneider Electric
ATV71E5D11N4

Variable speed drive ATV71 - 11kW 15HP - 480V - EMC filter - IP54

Schneider Electric ATV71E5075N4Price and lead time confirmed within 1 business day
Request a Quote