.svg&w=240){kind=small}
Pepperl Fuchs VIM32PL-E1AC8-0RE-IO-1V1401
Vibration sensor
- MPN
- VIM32PL-E1AC8-0RE-IO-1V1401
- Category
- Vibration Sensors
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the Pepperl Fuchs VIM32PL-E1AC8-0RE-IO-1V1401?
Vibration velocity in mm/s (rms) acc. to DIN ISO 10816/20816
Vibration acceleration in g (rms) acc. to DIN ISO 10816/20816
IO-Link Interface for process data, parameterization and diagnosis
Switching output and current output parameterizable
Additional temperature value output
Rugged stainless steel housing
Vibration sensor with IO-Link and programmable switching output or analog current output, Series: Performance Line, Measured variable: Vibration velocity , Vibration acceleration , Temperature, Vibration acceleration: 0 ... 10 g rms, Interface type: IO-Link (via C/Q = Pin 4), Device profile: Identification and Diagnosis - I&D, Output type: C/Q - Pin 4 in SIO mode (switching signal of the measured variable is programmable)
Specifications
General specifications
| Order code (Pepperl+Fuchs part number) | 70140695-100001 |
| Type | Vibration sensor |
| Measuring technology | MEMS capacitive |
| Series | Performance Line |
| Measured variable | Vibration velocity Vibration acceleration Temperature |
| Measuring range: Vibration velocity | 0 ... 128 mm/s v-rms |
| Measuring range: Vibration acceleration | 0 ... 10 g rms a-rms |
| Measuring range: Temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Measurement accuracy | Vibration velocity: ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s Vibration acceleration: ± 0.01 g (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 |
| Cross-sensitivity | < 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis |
| Resolution | Vibration velocity: 0.01 mm/s Vibration acceleration: 0.01 g |
| Frequency range | 10 ... 1000 Hz |
| Averaging time | for v-rms: 2 s for a-rms: 2 s |
| Sampling rate | 8 kHz |
| Lifecycle | Active (current Pepperl+Fuchs product) |
Functional safety related parameters
| MTTFd | 329 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Electrical specifications
| Fusing | external fuse is required: 1 A , fast acting , 30 V DC |
| Operating voltage | 18 ... 30 V DC UB |
| Current consumption | max. 700 mA |
| Power consumption | max. 21 W P0 |
| Time delay before availability | ≤ 1 s tv |
| Surge protection | up to 2 kV |
Interface
| Interface type | IO-Link (via C/Q = Pin 4) |
| IO-Link revision | 1.1 |
| Device profile | Identification and Diagnosis - I&D |
| Process data | Input 16 Byte measurement channels: -rms value velocity - peak value acceleration - rms value acceleration - temperature per measurement channel: - measurement value 2 Byte - scaling 8 Bit - switching signals 2 Bit status data |
| Vendor ID | 1 (0x0001) |
| Device ID | 5308417 (0x510001) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 5 ms |
| SIO mode support | yes |
| Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
Output 1
| Output type | C/Q - Pin 4 in SIO mode (switching signal of the measured variable is programmable) |
| Switching function | Normally open/closed (NO/NC) |
| Operating current | ≤ 100 mA |
| Short-circuit protection | yes |
Output 2
| Output type | I/Q - pin 2 (parameterizable as analog current output or switching signal) - I: analog output for the measured variable, current 4 ... 20 mA - Q: switching signal of the measured variable is parameterizable, PNP normally open |
| Switching function | Normally open/closed (NO/NC) |
| Operating current | ≤ 120 mA for switching signal |
| Voltage drop | < 2 V |
| Output current | 4 ... 20 mA at analog output |
| Load resistor | ≤ 500 Ω at analog output |
| Short-circuit protection | yes |
Standard conformity
| Degree of protection | DIN EN 60529, IP66, IP67 |
| Shock resistance | DIN EN 60068-2-27, 60 g, 6 ms |
| Vibration resistance | DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz |
| Vibration evaluation | DIN ISO 10816/20816 |
Approvals and certificates
| UL approval: Ordinary Location | E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request |
| UL approval: Maximum permissible ambient temperature | max. 80 °C (max. 176 °F) |
Ambient conditions
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | plug |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Degree of protection | IP66 / IP67 only in connected state |
| Connector: Threading | M12 |
| Connector: Number of pins | 4 |
| Mass | approx. 100 g |
| Dimensions: Length | 72.5 mm |
| Dimensions: Diameter | 23.8 mm |
No matching specifications
Downloads & documentation
Official documents from Pepperl Fuchs, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
VIM32PL-E1AC8-0RE-IO-1V1401: frequently asked questions
When can VIM32PL-E1AC8-0RE-IO-1V1401 be shipped?
VIM32PL-E1AC8-0RE-IO-1V1401 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up VIM32PL-E1AC8-0RE-IO-1V1401 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for VIM32PL-E1AC8-0RE-IO-1V1401 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for VIM32PL-E1AC8-0RE-IO-1V1401, subject to availability and destination.
More Pepperl Fuchs parts
Pepperl Fuchs VIM32PL-E1AC8-0RE-IO-1V1401Price and lead time confirmed within 1 business day
Request a Quote