.svg&w=240){kind=small}
Pepperl Fuchs UC500-30GM-2EP-IO-V15
Ultrasonic sensor
- MPN
- UC500-30GM-2EP-IO-V15
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the Pepperl Fuchs UC500-30GM-2EP-IO-V15?
IO-Link interface for service and process data
Programmable via DTM with PACTWARE
2 programmable switch outputs
Selectable sound lobe width
Synchronization options
Temperature compensation
Single head system, IO-Link interface for service and process data, Programmable via DTM with PACTWARE, 2 programmable switch outputs, Series: UC-30GM-IO, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Interface type: IO-Link, Output type: 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V
Specifications
General specifications
| Order code (Pepperl+Fuchs part number) | 191242 |
| Sensing range | 30 ... 500 mm |
| Adjustment range | 50 ... 500 mm |
| Dead band | 0 ... 30 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 380 kHz |
| Response delay | minimum : 25 ms factory setting: 45 ms |
| Lifecycle | Active (current Pepperl+Fuchs product) |
Memory
| Non-volatile memory | EEPROM |
| Write cycles | 100000 |
Indicators/operating means
| LED green | solid: Power onflashing: Standby mode or IO link communication |
| LED yellow 1 | solid: Object in evaluation range flashing: Learning function, object detected |
| LED yellow 2 | solid: Object in evaluation range flashing: Learning function, object detected |
| LED red | solid red: Error red, flashing: program function, object not detected |
Electrical specifications
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS UB |
| No-load supply current | ≤ 60 mA I0 |
| Power consumption | ≤ 1 W P0 |
| Time delay before availability | ≤ 100 ms tv |
Interface
| Interface type | IO-Link |
| Protocol | IO-Link V1.0 |
| Transfer rate | Acyclical: typical 240 Bit/s |
| Cycle time | min. 13.2 ms |
| Mode | COM2 (38.4 kBit/s) |
| Process data width | 16 bit |
| SIO mode support | yes |
Input/Output
| Input/output type | 1 synchronization connection, bidirectional |
| 0 Level | 0 ... 1 V |
| 1 Level | 4 V ... UB |
| Input impedance | > 12 kΩ |
| Output current | < 12 mA |
| Pulse length | 0.5 ... 300 ms (level 1) |
| Pulse interval | ≥ 14 ms (level 0) |
| Synchronization frequency: Common mode operation | ≤ 70 Hz |
| Synchronization frequency: Multiplex operation | ≤ 90 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ) |
Output
| Output type | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Rated operating current | 200 mA , short-circuit/overload protected Ie |
| Voltage drop | ≤ 2.5 V Ud |
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Switching frequency | ≤ 11 Hz f |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable H |
| Temperature influence | ≤ 1.5 % from full-scale value (with temperature compensation)≤ 0.2 %/K (without temperature compensation) |
Compliance with standards and directives
| Standard conformity: Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Approvals and certificates
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | Connector plug M12 x 1 , 5-pin |
| Degree of protection | IP67 |
| Material: Housing | Stainless steel 1.4305 / AISI 303 TPU Polyamides |
| Material: Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 66 g |
| Dimensions: Length | 93 mm |
| Dimensions: Diameter | 30 mm |
Factory settings
| Output 1 | near switch point: 50 mm far switch point: 500 mm output function: Window mode output behavior: NO contact |
| Output 2 | near switch point: 100 mm far switch point: 250 mm output function: Window mode output behavior: NO contact |
| Beam width | wide |
No matching specifications
Downloads & documentation
Official documents from Pepperl Fuchs, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
UC500-30GM-2EP-IO-V15: frequently asked questions
When can UC500-30GM-2EP-IO-V15 be shipped?
UC500-30GM-2EP-IO-V15 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up UC500-30GM-2EP-IO-V15 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for UC500-30GM-2EP-IO-V15 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for UC500-30GM-2EP-IO-V15, subject to availability and destination.
More Pepperl Fuchs parts
Pepperl Fuchs UC500-30GM-2EP-IO-V15Price and lead time confirmed within 1 business day
Request a Quote