.svg&w=240){kind=small}
Pepperl Fuchs UC400-F77-IU-IO-V31
Ultrasonic sensor
- MPN
- UC400-F77-IU-IO-V31
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the Pepperl Fuchs UC400-F77-IU-IO-V31?
IO-Link interface for parameterization
Programmable via DTM with PACTWARE
Selectable sound lobe width
Synchronization options
Temperature compensation
Analog output
Single head system, IO-Link interface for parameterization, Programmable via DTM with PACTWARE, Selectable sound lobe width, Series: UC-F77, Operating voltage: 18 ... 30 V DC , ripple 10 %SS , , Interface type: IO-Link (available after activation via programming button until next reset), Output type: 1 analog output 0 (4) ... 20 mA or , 1 analog output 0 ... 10 V, UL approval: cULus Listed, Class 2 Power Source
Specifications
General specifications
| Order code (Pepperl+Fuchs part number) | 261247 |
| Sensing range | 30 ... 400 mm |
| Adjustment range | 40 ... 400 mm |
| Dead band | 0 ... 30 mm |
| Standard target plate | 20 mm x 20 mm |
| Transducer frequency | approx. 310 kHz |
| Response delay | minimum : 10 ms factory setting: 37 ms |
| Sensor cycle time | ≥ 10 ms (factory setting) ; programmable to 60 s |
| Lifecycle | Active (current Pepperl+Fuchs product) |
Memory
| Non-volatile memory | EEPROM |
| Write cycles | 300000 |
Indicators/operating means
| LED green | solid: power onflashing: standby mode or IO-Link communication |
| LED yellow | solid: object in evaluation rangeflashing: programming of the limits, object detected |
| LED red | solid: faultflashing: programming limits, object not detected |
Electrical specifications
| Operating voltage | 18 ... 30 V DC , ripple 10 %SS UB |
| No-load supply current | ≤ 50 mA I0 |
| Power consumption | ≤ 500 mW P0 |
| Time delay before availability | ≤ 300 ms tv |
Interface
| Interface type | IO-Link (available after activation via programming button until next reset) |
Input/Output
| Input/output type | 1 synchronization connection, bidirectional |
| 0 Level | 0 ... 1 V |
| 1 Level | 2.5 V ... UB |
| Input impedance | > 22 kΩ |
| Output current | current source < 2.5 mA |
| Pulse length | ≥ 1 ms with external control, low active |
| Synchronization frequency: Common mode operation | ≤ 109 Hz |
| Synchronization frequency: Multiplex operation | ≤ 109 Hz / n , n = number of sensors , n ≤ 10 |
Output
| Output type | 1 analog output 0 (4) ... 20 mA or 1 analog output 0 ... 10 V |
| Resolution | current output: evaluation range [mm]/3200 but ≥ 0.35 mm voltage output: evaluation range [mm]/4000 but ≥ 0.35 mm |
| Deviation of the characteristic curve | ≤ ± 1 % of full-scale value |
| Repeat accuracy | ≤ ± 0.1 % of full-scale value |
| Load impedance | current output: ≤ 500 Ohm voltage output: ≥ 1000 Ohm |
| Temperature influence | ≤ ± 0.75 % of the end value (with temperature compensation) from 10 minutes after switching on the sensor ; 0.17 %/K (without temperature compensation) |
Compliance with standards and directives
| Standard conformity: Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 IEC 61131-9:2013 |
Approvals and certificates
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | current output -25 ... 60 °C (-13 ... 140 °F) voltage output -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | Connector plug M8 x 1 , 4-pin |
| Degree of protection | IP67 |
| Material: Housing | Polycarbonate |
| Material: Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Installation position | any position |
| Mass | 9 g |
| Tightening torque, fastening screws | max. 0.2 Nm |
| Dimensions: Height | 31 mm |
| Dimensions: Width | 12 mm |
| Dimensions: Length | 23 mm |
Factory settings
| Output | near limit: 40 mm far limit: 400 mm Output mode: rising ramp output type: 4 ... 20 mA |
| Beam width | wide |
No matching specifications
Downloads & documentation
Official documents from Pepperl Fuchs, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
UC400-F77-IU-IO-V31: frequently asked questions
When can UC400-F77-IU-IO-V31 be shipped?
UC400-F77-IU-IO-V31 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up UC400-F77-IU-IO-V31 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for UC400-F77-IU-IO-V31 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for UC400-F77-IU-IO-V31, subject to availability and destination.
More Pepperl Fuchs parts
Pepperl Fuchs UC400-F77-IU-IO-V31Price and lead time confirmed within 1 business day
Request a Quote