.svg&w=240){kind=small}
Pepperl Fuchs UC2000-L2-E6-V15
Ultrasonic sensor
- MPN
- UC2000-L2-E6-V15
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the Pepperl Fuchs UC2000-L2-E6-V15?
Sensor head bidirectional and rotatable
Function indicators visible from all directions
Quick mounting bracket
Selectable sound lobe width
Programmable
Single head system, Sensor head bidirectional and rotatable, Function indicators visible from all directions, Quick mounting bracket, Series: UC-L2, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Interface type: Serial interface (programming adapter required) , 9600 BPS, no parity, 8 data bits, 1 stop bit, Output type: 2 switch outputs PNP, NO/NC, programmable, UL approval: cULus Listed, Class 2 Power Source
Specifications
General specifications
| Order code (Pepperl+Fuchs part number) | 277765 |
| Sensing range | 60 ... 2000 mm |
| Adjustment range | 80 ... 2000 mm |
| Dead band | 0 ... 60 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 175 kHz |
| Lifecycle | Active (current Pepperl+Fuchs product) |
Nominal ratings
| Response delay | minimum: 60 ms factory setting: 120 ms |
| Time delay before availability | ≤ 1600 ms tv |
Indicators/operating means
| LED green | Operating display |
| LED yellow 1 | switching state switch output 1 |
| LED yellow 2 | switching state switch output 2 |
| LED red | error |
Electrical specifications
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS UB |
| No-load supply current | ≤ 50 mA I0 |
Interface
| Interface type | Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit |
Input/Output
| Input/output type | 1 synchronization connection, bidirectional |
| 0 Level | 0 ... 1 V |
| 1 Level | 4 V ... UB |
| Input impedance | > 12 kΩ |
| Output current | < 12 mA |
| Pulse length | 0.5 ... 300 ms (level 1) |
| Pulse interval | ≥ 33 ms (level 0) |
| Synchronization frequency: Common mode operation | ≤ 30 Hz |
| Synchronization frequency: Multiplex operation | ≤ 33 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ) |
Output
| Output type | 2 switch outputs PNP, NO/NC, programmable |
| Rated operating current | 200 mA , short-circuit/overload protected Ie |
| Voltage drop | ≤ 2 V Ud |
| Repeat accuracy | ≤ 0.1 % of full-scale value |
| Switching frequency | ≤ 5 Hz f |
| Range hysteresis | programmable , preset to 1 mm H |
| Temperature influence | < 1.5 % of full-scale value |
Compliance with standards and directives
| Standard conformity: Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Approvals and certificates
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | Connector plug M12 x 1 , 5-pin |
| Degree of protection | IP67 |
| Material: Housing | PA-GF35 |
| Material: Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Mass | 115 g |
| Dimensions: Height | 40 mm |
| Dimensions: Width | 40 mm |
| Dimensions: Length | 40 mm |
Factory settings
| Output 1 | near switch point: 80 mm far switch point: 2000 mm output function: Window mode output behavior: NO contact |
| Output 2 | near switch point: 150 mm far switch point: 1000 mm output function: Window mode output behavior: NO contact |
| Beam width | wide |
| Evaluation procedure | averaging (MxN)M = 5N = 2 |
General information
| Supplementary information | Switch settings of the external programming adapter: "output load": pull-down "output logic": inv |
No matching specifications
Downloads & documentation
Official documents from Pepperl Fuchs, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
UC2000-L2-E6-V15: frequently asked questions
When can UC2000-L2-E6-V15 be shipped?
UC2000-L2-E6-V15 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up UC2000-L2-E6-V15 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for UC2000-L2-E6-V15 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for UC2000-L2-E6-V15, subject to availability and destination.
More Pepperl Fuchs parts
Pepperl Fuchs UC2000-L2-E6-V15Price and lead time confirmed within 1 business day
Request a Quote