.svg&w=240){kind=small}
Pepperl Fuchs UB6000-F42-EP-IO-V15
Ultrasonic sensor
- MPN
- UB6000-F42-EP-IO-V15
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the Pepperl Fuchs UB6000-F42-EP-IO-V15?
IO-Link Interface for process data, parameterization and diagnosis
Selectable sound lobe width
TEACH-IN
Synchronization options
Push-pull output
Degree of protection IP67
Ultrasonic sensor with IO-Link interface in cubic design and 1 push-pull output, IO-Link Interface for process data, parameterization and diagnosis, Selectable sound lobe width, TEACH-IN, Series: UB-F42, Operating voltage: 10 ... 30 V DC , ripple 10 %SS, Interface type: IO-Link, Output type: 1 push-pull output , short-circuit protected , reverse polarity protected, UL approval: cULus Listed, Class 2 Power Source
Specifications
General specifications
| Order code (Pepperl+Fuchs part number) | 70165295-100020 |
| Sensing range | 350 ... 6000 mm |
| Adjustment range | 400 ... 6000 mm |
| Dead band | 0 ... 350 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 65 kHz |
| Response delay | 312 ms |
| Sensor cycle time | ≥ 78 ms |
| Temperature influence | ≤ ± 0,75 % of the full-scale value 20 min after switching on |
| Lifecycle | Active (current Pepperl+Fuchs product) |
Memory
| Non-volatile memory | EEPROM |
| Write cycles | 300000 |
Indicators/operating means
| LED green | solid: power on flashing: standby mode flashing with short break: IO-Link mode |
| LED yellow | solid: object in evaluation rangeflashing: switch point programming |
| LED red | solid: errorflashing: switch point programming, object not detected fast flashes: short-circuit or overtemperature |
Electrical specifications
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS UB |
| No-load supply current | ≤ 85 mA I0 |
| Power consumption | ≤ 1200 mW P0 |
| Time delay before availability | ≤ 300 ms tv |
Interface
| Interface type | IO-Link |
| IO-Link revision | 1.1.4 |
| Device profile | Smart Sensor - SSP 4.1.1 |
| Process data | Input: 32 Bit - measurement value 16 Bit - scale 8 Bit - switching signals 2 Bit |
| Vendor ID | 1 (0x0001) |
| Device ID | 3147527 (0x300707) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 3.3 ms |
| SIO mode support | yes |
| Compatible master port type | Class A (use adapter cable listed in accesories) Class B (use 3-pole adapter or 3-wire cable) |
Input/Output
| Input/output type | 1 synchronization connection, bidirectional |
| 0 Level | 0 ... 1 V |
| 1 Level | 2.5 V ... UB |
| Input impedance | > 22 kΩ |
| Output current | current source < 2.5 mA |
| Pulse length | ≥ 1 ms with external control, low active |
| Synchronization frequency: Common mode operation | ≤ 12 Hz |
| Synchronization frequency: Multiplex operation | ≤ 12 Hz / n , n = number of sensors , n ≤ 10 |
Input
| Input type | 1 program input |
| Level (evaluation limit 1) | 0 ... 0.6 V |
| Level (evaluation limit 2) | 3.7 V ... UB |
| Input impedance | > 4.7 kΩ |
| Pulse length | ≥ 1 s |
Switching output
| Output type | 1 push-pull output , short-circuit protected , reverse polarity protected |
| Rated operating current | 200 mA , short-circuit/overload protected Ie |
| Switching frequency | 2 Hz |
| Voltage drop | ≤ 2.5 V |
| Repeat accuracy | ≤ ± 0.1 % of full-scale value |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm |
| Off-state current | ≤ 100 µA |
Compliance with standards and directives
| Standard conformity: Standards | EN 60947-5-2 IEC 61131-9 / IO-Link V1.1.4 |
Approvals and certificates
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | Connector plug |
| Degree of protection | IP67 |
| Material: Housing | PC-GF10 |
| Material: Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Connector: Threading | M12 x 1 |
| Connector: Number of pins | 5 |
| Connector: Material | Diecast zinc |
| Mass | 200 g |
| Tightening torque, fastening screws | max. 3 Nm |
| Dimensions: Height | 52 mm |
| Dimensions: Width | 80 mm |
| Dimensions: Length | 80 mm |
Factory settings
| Output | near switch point: 400 mm far switch point: 6000 mm Output mode: Window mode Output logic: normally open |
| Beam width | wide |
No matching specifications
Downloads & documentation
Official documents from Pepperl Fuchs, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
UB6000-F42-EP-IO-V15: frequently asked questions
When can UB6000-F42-EP-IO-V15 be shipped?
UB6000-F42-EP-IO-V15 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up UB6000-F42-EP-IO-V15 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for UB6000-F42-EP-IO-V15 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for UB6000-F42-EP-IO-V15, subject to availability and destination.
More Pepperl Fuchs parts
Pepperl Fuchs UB6000-F42-EP-IO-V15Price and lead time confirmed within 1 business day
Request a Quote