.svg&w=240){kind=small}
Pepperl Fuchs NRN30-30GS50-E2-IO-V1
Inductive sensor
- MPN
- NRN30-30GS50-E2-IO-V1
- Category
- Inductive Sensors
Price and lead time confirmed within 1 business day
Request a Quote
- 1We check stock, condition and lead time
- 2You get a written quote by email
- 3Approve it and we ship — in-stock parts within 1 business day
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- 100% positive eBay feedback
- Ships via
What is the Pepperl Fuchs NRN30-30GS50-E2-IO-V1?
30 mm non-flush
Reduction factor = 1
Magnetic field resistant
IO-Link interface for service and process data
Switch point mode or window mode can be set
Switching function, stability alarm and pulse extension can be set
Reduction factor 1, magnetic field resistant, Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Rated operating distance: 30 mm (factory setting), Installation: non-flush, Output polarity: DC, Output type: 3-wire, Thread mold: M30, Construction type: Cylindrical, thread, Series: Cylindrical type, Operating voltage: 10 ... 30 V DC, Switching frequency: 0 ... 680 Hz (switch point mode) , 0 ... 50 Hz (window mode, switch point mode with stability alarm), Type of voltage: DC
Specifications
General specifications
| Order code (Pepperl+Fuchs part number) | 306533-0023 |
| Switching function | Normally open/closed (NO/NC) programmable |
| Output type | PNP |
| Rated operating distance | 30 mm (factory setting) sn |
| Near operating distance | 20 mm (can be activated by software) |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 24.3 mm sa |
| Reduction factor rAl | 1 |
| Reduction factor rCu | 1 |
| Reduction factor r304 | 1 |
| Reduction factor rSt37 | 1 |
| Output type | 3-wire |
| Lifecycle | Active (current Pepperl+Fuchs product) |
Nominal ratings
| Operating voltage | 10 ... 30 V DC UB |
| Switching frequency | 0 ... 680 Hz (switch point mode) 0 ... 50 Hz (window mode, switch point mode with stability alarm) f |
| Hysteresis | typ. 3 % H |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 0.5 V Ud |
| Operating current | 0 ... 200 mA IL |
| Off-state current | 0 ... 0.5 mA typ. 60 µA at 25 °C Ir |
| No-load supply current | ≤ 15 mA I0 |
| Time delay before availability | max. 150 ms tv |
| Constant magnetic field | 200 mT B |
| Alternating magnetic field | 200 mT B |
| Status indicator | Multihole-LED, yellow |
Safety-relevant product characteristics
| MTTFd | 360 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Interface
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision | 1.1 |
| Device ID | 0x201106 (2101510) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 2.3 ms |
| Process data width | Process data input (control system side): 2 Bit Process data output (control system side): none |
| SIO mode support | yes |
| Compatible master port type | A |
Compliance with standards and directives
| Standard conformity: Standards | EN IEC 60947-5-2 |
Approvals and certificates
| Protection class | II |
| Rated insulation voltage | 60 V Ui |
| Rated impulse withstand voltage | 800 V Uimp |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC Output Switching Current: 200 mA |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | Connector plug |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PBT |
| Degree of protection | IP67 |
| Connector: Threading | M12 x 1 |
| Connector: Number of pins | 3 |
| Mass | 137 g |
| Dimensions: Length | 65 mm |
| Dimensions: Diameter | 30 mm |
Factory settings
| Default setting | operating mode = switch point mode with stability alarm switching function = Normally open (NO) switching distance = 30 mm |
General information
| Scope of delivery | 2 self locking nuts in scope of delivery |
No matching specifications
Downloads & documentation
Official documents from Pepperl Fuchs, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
NRN30-30GS50-E2-IO-V1: frequently asked questions
When can NRN30-30GS50-E2-IO-V1 be shipped?
NRN30-30GS50-E2-IO-V1 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up NRN30-30GS50-E2-IO-V1 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for NRN30-30GS50-E2-IO-V1 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for NRN30-30GS50-E2-IO-V1, subject to availability and destination.
More Pepperl Fuchs parts
Pepperl Fuchs NRN30-30GS50-E2-IO-V1Price and lead time confirmed within 1 business day
Request a Quote