Home / Keyence / 2D Laser Displacement Sensor / Keyence LJ-G5001P

Keyence LJ-G5001P

Controller, PNP Type. . Series: 2D Laser Displacement Sensor. Series code: LJ-G5000 series

MPN: LJ-G5001P
Category: 2D Laser Displacement Sensor

Price and lead time confirmed within 1 business day

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)
30-day returns, no restocking fee on unused parts
Ships via
100% positive eBay feedback

Have spare Keyence parts? We buy surplus →

What is the Keyence LJ-G5001P?

Controller, PNP Type. LJ-G5001P. Series: 2D Laser Displacement Sensor. Series code: LJ-G5000 series

Specifications

Model Name	Controller, PNP Type
Model Code	LJ-G5001P
Series Title	2D Laser Displacement Sensor
Series Code	LJ-G5000 series
Data Sheet URL	https://www.keyence.com/download/download/confirmation/?dlSeriesId=WS_SR_lj_g&dlModelId=PM_122G51P&dlSiteId=1&dlLanguageId=en-US&dlLangType=en-US
CAD URL	https://www.keyence.com/products/measure/laser-2d/lj-g/downloads/?mode=cd&modelId=PM_122G51P
Manuals URL	https://www.keyence.com/products/measure/laser-2d/lj-g/downloads/?mode=ma&modelId=PM_122G51P
Model	LJ-G5001P
Head compatibility	Compatible
Number of connectable sensors	2 units max.
Display - Minimum display unit	0.1 µm *1, 0.001 mm2, 0.01° (Inch mode : 0.01 Mil, 0.00001 inch)
Display - Maximum display range	±99999.9 mm, ±999999 mm2, ±99999.9° (Inch mode : ±9999.99 Mil, ±999.999 inch)
Input terminal block - Laser remote interlock input	Non-voltage input
Input terminal block - Trigger input	For sensor head A, voltage input
Input terminal block - Timing 1 input	Voltage input
Output terminal block - Analog voltage output	±10 V x 2 outputs, output impedance: 100 Ω
Output terminal block - Total judgment output	PNP open-collector output
Output terminal block - Error output	PNP open-collector output (N.C.)
Output terminal block - Process output	PNP open-collector output
Output terminal block - Trigger input enable output	For sensor head A, PNP open-collector output
Expansion connector - Timing 2 input	Voltage input
Expansion connector - Trigger input	For sensor head B, voltage input
Expansion connector - Program switching input	Voltage input, 4 inputs
Expansion connector - Memory card save input	Voltage input
Expansion connector - Laser-Off input	For sensor head A/B, voltage input
Expansion connector - Judgment/Binary output	3-level judgment output: OUT1 to OUT8, total judgment outputBinary output: OUT1 to OUT8 measured data output (21 bits)PNP open-collector output*2
Expansion connector - Strobe output	PNP open-collector output
Expansion connector - Trigger input enable output	For sensor head B, PNP open-collector output
Analog RGB monitor output	SVGA (800 x 600 pixels)
RS-232C interface	Measured data output and control input/output (Maximum baud rate: 115200 bps, selectable)
USB interface	In conformity with USB Revision 2.0 HI-SPEED (USB 1.1 Full-SPEED compatible)
Ethernet interface	100BASE-TX/10BASE-T
Memory card	Compatible with NR-M1G (1 GB). (with FAT32)
Major functions	Sensor heads calculation, Profile adjustment, Filter, Smoothing, Averaging,Position adjustment, OUT name change, Measurement mode selection (Height, position, gap, width, center position, section area, intersection, angle, profile comparison, profile tracking),Scaling, Average, Measurement, Measured value alarm, Tolerance setting, Auto-zero, Storage (data/profile),Memory card saving, Program memory, Trigger mode change, Mutual interference prevention, Measuring range change,Calibration, Laser light adjustment, Sampling time setting, Mask, Profile alarm setting, Inclination adjustment, Height adjustment,Display language switch, Setting support software connection, Trigger pitch/Measuring time display, etc.
Rating - Power voltage	24 VDC ±10 %, Ripple (P-P) 10 % or less
Rating - Current consumption	800 mA or less with 1 sensor head/1 A or less with two sensor heads
Environmental resistance - Ambient temperature	0 to +50 °C 32 to 122 °F
Environmental resistance - Relative humidity	35 to 85 % RH (No condensation)
Weight	Approx. 1,050 g

LJ-G5001P: frequently asked questions

When can LJ-G5001P be shipped?

LJ-G5001P is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up LJ-G5001P in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for LJ-G5001P and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for LJ-G5001P, subject to availability and destination.