IFM AC2923
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Field modules for wet areas ProcessLine |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can AC2923 be shipped?
AC2923 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up AC2923 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for AC2923 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for AC2923, subject to availability and destination.
Specially for the use in wet areas of the food and beverage industry Hygienic design without corners and edges Resistant to high-pressure cleaning with aggressive cleaning agents Clearly visible powerful LEDs for displaying operation, switching status and error
Specifications
Application
| Application | hygienic and wet areas in the food industry |
Electrical data
| Operating voltage[V] [V] | 26.5...31.6 DC |
| Max. current consumption from AS-i[mA] [mA] | 450 |
| Reverse polarity protection | yes |
Inputs / outputs
| Number of inputs and outputs | Number of analogue inputs: 4 |
Inputs
| Sensor supply of the inputs | AS-i |
| Power supply[V] [V] | 18...30 |
| Number of analogue inputs | 4; (connection of 2-wire, 3-wire and 4-wire sensors) |
| Analogue input (current)[mA] [mA] | 4...20 |
| Max. voltage drop across load for nominal voltage[V] [V] | 10 |
| Resolution of analogue input | 1 bit = 1 µA |
| Precision analogue input[%] [%] | 0,5 |
Operating conditions
| Ambient temperature[°C] [°C] | -5...70 |
| Storage temperature[°C] [°C] | -25...85 |
| Max. relative air humidity[%] [%] | 90; (linearly decreasing to 50 % (40 °C) non condensing) |
| Max. height above sea level[m] [m] | 2000 |
| Protection | IP 68; IP 69K |
| Pollution degree | 2 |
Tests / approvals
| EMC | EN 62026-2; EN 61000-6-2 |
| MTTF[years] [years] | 98 |
AS-i classification
| AS-i version | 2.11; 3.0 |
| Extended addressing mode | no |
| AS-i master profile | M3; M4 |
| AS-i profile | S-7.3.E |
| AS-i I/O configuration[hex] [hex] | 7 |
| AS-i ID code[hex] [hex] | 3.E |
| AS-i certificate | 101108 |
Mechanical data
| Weight[g] [g] | 625 |
| Dimensions[mm] [mm] | Ø 137.3 / L = 80 |
| Materials | threaded bush: stainless steel (316L/1.4404); LED-Fenster: PC; O-ring: EPDM; Protective cap: PP |
Displays / operating elements
| Display | analogue signal; LED, yellow channels AI1...AI4; operation; LED, green AS-i; errors; LED, red |
| analogue signal | LED, yellow channels AI1...AI4 |
| operation | LED, green AS-i |
| errors | LED, red |
Electrical connection
| Module connection | M12 |
Accessories
| Accessories (optional) | Protective cap: M12, E70297; Flat cable insulation displacement connector:, E70455; Torque wrench:, E70390 |
Remarks
| Remarks | When the sensors and actuators are supplied from AS-i the load must not exceed a maximum of 380 mA.; The load for an individual sensor connection must not exceed 200 mA.; When connecting a 2-wire or 3-wire sensor without own supply there has to be an external link between pin 3 and pin 4.; The inputs (pins 2 and 4) are electrically separated and have no connection to AS-i.; The sensor supply (pins 1 and 3) is electrically connected to AS-i.; MEW = % of the final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection - AS-i
| Connector | 1 x M12; coding: A; Tightening torque: 1.2...1.4 Nm |
Electrical connection - Process connection
| Connector | 4 x M12; coding: A; Tightening torque: 1.2...1.4 Nm |
