Home / B&R / Digital signal processing and preparation / B&R X20cDS1119

B&R X20cDS1119

I/O module, 3 digital 5 V (symmetrical) channels…

MPN: X20cDS1119
Category: Digital signal processing and preparation

Price and lead time confirmed within 1 business day

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)
30-day returns, no restocking fee on unused parts
Ships via

What is the B&R X20cDS1119?

3 digital 5 V channels, configurable as inputs or outputs

2 digital 24 V input channels

1 universal counter pair (2 event counters, AB counters or up/down counters)

Linear motion generator (A/B, direction/frequency) with one reference pulse

SSI absolute encoder

NetTime timestamp: Input data, target position, position change, edge change, counter change

Specifications

Short description

I/O module

3 digital 5 V (symmetrical) channels configurable as inputs or outputs, 2 digital 24 V (asymmetrical) input channels, 1 universal counter pair (2 event counters, AB counter or up/down counter), linear motion generator (A/B, direction/frequency) with 1 reference pulse, SSI absolute encoder, relative or absolute moments of input edges with microsecond resolution, time-triggered I/O, I/O oversampling

General information

Diagnostics – Module run/error	Yes, using LED status indicator and software
Diagnostics – Inputs/Outputs	Yes, using LED status indicator
Power consumption – Bus	0.01 W
Power consumption – Internal I/O	1.5 W
Certifications – CE	Yes
Certifications – UKCA	Yes
Certifications – CRA (Cyber Resilience Act)	In preparation
Certifications – ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Certifications – UL	cULus E115267; Industrial control equipment
Certifications – HazLoc	cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Certifications – DNV	Temperature: B (0 to 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications – LR	ENV1
Certifications – KR	Yes
Certifications – ABS	Yes
Certifications – BV	EC33B ; Temperature: 5 - 55°C; Vibration: 4 g; EMC: Bridge and open deck
B&R ID code	0xE20D
Status indicators	I/O function per channel, operating state, module status
Additional power dissipation caused by actuators (resistive) [W]	-
Type of signal lines	Shielded lines must be used for all signal lines.

Linear motion generator

Quantity	1
Encoder outputs	5 V, symmetrical (A/B, direction/frequency)
Counter size	16/32-bit

SSI absolute encoder

Encoder power supply – 5 VDC	±5%, module-internal, max. 300 mA
Encoder power supply – 24 VDC	Module-internal, max. 300 mA
Quantity	1
Counter size	Up to 32-bit depending on encoder
Max. transfer rate	1 Mbit/s
Encoder signal	5 V, symmetrical

Digital inputs 5 VDC

Input filter – Hardware	≤200 ns
Input filter – Software	-
Quantity	Up to 3, configuration as input or output using software
Nominal voltage	5 VDC differential signal, EiA RS485 standard
Input characteristics per EN 61131-2	Type 1
Input frequency	600 kHz
Common-mode range	-7 V ≤ V CM ≤ +12 V
Insulation voltage between encoder and bus	500 V eff
Overload characteristics of encoder power supply	Short-circuit proof, overload-proof
Additional functions	SSI absolute encoder, universal counter pair

Digital inputs 24 VDC

Input filter – Hardware	≤2 µs
Input filter – Software	-
Switching threshold – Low	<5 VDC
Switching threshold – High	>15 VDC
Quantity	2
Nominal voltage	24 VDC
Input characteristics per EN 61131-2	Type 1
Input circuit	Sink
Input voltage	24 VDC -15% / +20%
Input current at 24 VDC	Approx. 3.4 mA
Input resistance	Approx. 7.19 kΩ
Input frequency	100 kHz
Insulation voltage between channel and bus	500 V eff
Additional functions	Latch function for universal counter pair

Universal counter pair

Evaluation – AB counter	4xCounter"."> (note: Problems may occur during evaluation due to the system at an input frequency greater than 500 kHz. For additional information, see section)
Evaluation – Event counters	2x
Evaluation – Up/Down counter	2x
Encoder power supply – 5 VDC	±5%, module-internal, max. 300 mA
Encoder power supply – 24 VDC	Module-internal, max. 300 mA
Quantity	1
Operating modes	2x event counter, up/down counter, AB counter
Encoder inputs	5 V, symmetrical
Counter size	16/32-bit
Input frequency	Max. 600 kHz

Digital outputs 5 VDC

Quantity	Up to 3, configuration as input or output using software
Type	5 VDC differential signal, EiA RS485 standard
Output circuit	Sink and/or source
Output protection	Short-circuit protection
Variant	Push/Pull/Push-Pull
Nominal voltage	5 VDC
Output current	Max. 65 mA
Diagnostic status	Output is readable.
Switching frequency	Max. 500 kHz
Insulation voltage between channel and bus	500 V eff
Switching voltage	5 VDC differential signal, EiA RS485 standard
Additional functions	SSI absolute encoder, linear motion generator

Electrical properties

Electrical isolation

Channel isolated from bus; Channel not isolated from channel

Operating conditions

Mounting orientation – Horizontal	Yes
Mounting orientation – Vertical	Yes
Installation elevation above sea level – 0 to 2000 m	No limitation
Installation elevation above sea level – >2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature – Horizontal mounting orientation	-25 to 60°C
Temperature – Vertical mounting orientation	-25 to 50°C
Temperature – Derating	-
Temperature – Starting temperature	Yes, -40°C
Temperature – Storage	-40 to 85°C
Temperature – Transport	-40 to 85°C
Relative humidity – Operation	Up to 100%, condensing
Relative humidity – Storage	5 to 95%, non-condensing
Relative humidity – Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block X20TB12 separately.; Order 1x bus module X20cBM11 separately.
Pitch	12.5 +0.2 mm

Accessories

Required accessories (order separately)

X20cBM11	Bus modules — Bus module for 24 VDC I/O modules; The internal I/O power supply is connected through.
X20TB12	Terminal blocks — Tool-free wiring with push-in technology; Simple wire release using lever; Ability to label each terminal; Plain text labeling also possibl…

Downloads & documentation

Official documents from B&R, downloaded directly from the manufacturer.

Data sheets & manuals

CAD & dimension drawings

Certificates (12)

X20cDS1119: frequently asked questions

When can X20cDS1119 be shipped?

X20cDS1119 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up X20cDS1119 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for X20cDS1119 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for X20cDS1119, subject to availability and destination.