
B&R 4PPC70.0573-20B
Power Panel C70, 5.7", landscape format. CPU and memory…
- MPN
- 4PPC70.0573-20B
- Category
- Power Panel C70
Request a Quote
- 12-month warranty (new) · 3-month (used/refurbished)
- 30-day returns, no restocking fee on unused parts
- Ships via
What is the B&R 4PPC70.0573-20B?
Power Panel C70, 5.7", landscape format. CPU and memory: Intel Atom 333 MHz (compatible), 256 MB DDRAM, 32 kB FRAM, 2 GB onboard flash drive. Display and touch screen: 5.7", 640 x 480 (VGA) resolution, analog resistive touch screen, landscape format, anthracite gray pinstripe. Interfaces: 1x POWERLINK, 1x Ethernet 10/100 Mbit/s, 1x X2X Link, 2x USB 2.0.
Specifications
General information
| System requirements – Automation Studio | 4.1.4.375 and later |
| System requirements – Automation Runtime | K4.08 and later |
| System requirements – Support for X20SLX modules | Rev. B4 and later |
| Support – Controller redundancy | No |
| Support – ACOPOS support | Yes |
| Support – Visual Components support | Yes |
| Certifications – CE | Yes |
| Certifications – UKCA | Yes |
| Certifications – CRA (Cyber Resilience Act) | Non-compliant |
| Certifications – UL | cULus E115267; Industrial control equipment |
| B&R ID code | 0xE4B2 |
| Cooling | Fanless |
| Power button | No |
| Reset button | Yes |
| Status indicators | Supply voltage OK, operating state, module status, POWERLINK, Ethernet |
| Buzzer | Yes |
Controller
| Processor – Data code | 24 kB |
| Processor – Program code | 32 kB |
| Processor – Type | Atom E620T |
| Processor – Clock frequency | 333 MHz (compatible) |
| Processor – L2 cache | 512 kB |
| Application memory – Guaranteed | 40 TB |
| Application memory – Results for 5 years | 21.9 GB/day |
| Application memory – Type | 2 GB eMMC flash memory |
| Application memory – Data retention | 10 years |
| Application memory – Guaranteed erase/write cycles | 20,000 |
| Application memory – Error-correcting code (ECC) | Yes |
| Application memory – Storage health data support | Yes, starting with AR 4.90 and hardware revision F0 |
| Bootloader | Automation Runtime AR 4.08 |
| Real-time clock | Nonvolatile, resolution 1 s, -10 to 10 ppm accuracy at 25°C (note: The real-time clock is backed up for approx. 1000 hours @ 25°C by a gold foil capacitor. The gold foil capacitor is completely charged after 3 continuous hours of operation.) |
| Floating point unit (FPU) | Yes |
| Mode/Node switches | No |
| Remanent variables | 32 kB FRAM, retention >10 years (note: The memory size for remanent variables is configurable in Automation Studio.) |
| DRAM | 256 MB |
| Shortest task class cycle time | 0.4 ms |
| Typical instruction cycle time | 0.01 µs |
| Temperature cutoff | Yes, at >88°C |
Display
| Viewing angles – Horizontal | Direction L / Direction R = Typ. 80° |
| Viewing angles – Vertical | Direction U / Direction D = Typ. 70° |
| Backlight – Type | LED |
| Backlight – Brightness | Typ. 400 cd/m² |
| Backlight – Half-brightness time | 50,000 h (note: Value applies at an ambient temperature of 25°C. Reducing the brightness by 50% can increase the half-brightness time up to 50%.) |
| Touch screen – Type | AMT |
| Touch screen – Technology | Analog resistive |
| Touch screen – Controller | B&R, serial, 12-bit |
| Touch screen – Transmittance | 80% ±3% |
| Type | TFT color |
| Diagonal | 5.7" |
| Colors | 262,144 (RGB, 6 bits per channel) |
| Resolution | VGA, 640 x 480 pixels |
| Contrast | Typ. 850:1 |
| Screen rotation | Yes, using Visual Components |
Interfaces
| Interface IF1 – Physical layer | 100BASE-TX |
| Interface IF1 – Half-duplex | Yes |
| Interface IF1 – Full-duplex | POWERLINK mode: No / Ethernet mode: Yes |
| Interface IF1 – Autonegotiation | Yes |
| Interface IF1 – Auto-MDI/MDIX | Yes |
| Interface IF1 – Fieldbus | POWERLINK V2 managing or controlled node |
| Interface IF1 – Type | Type 4Communication → POWERLINK → General information → Hardware - IF/LS" in Automation Help"> (note: See section) |
| Interface IF1 – Variant | 1x RJ45 shielded |
| Interface IF1 – Line length | Max. 100 m between 2 nodes (segment length) |
| Interface IF1 – Max. transfer rate | 100 Mbit/s |
| Interface IF2 – Physical layer | 10BASE-T/100BASE-TX |
| Interface IF2 – Half-duplex | Yes |
| Interface IF2 – Full-duplex | Yes |
| Interface IF2 – Autonegotiation | Yes |
| Interface IF2 – Auto-MDI/MDIX | Yes |
| Interface IF2 – Type | Ethernet |
| Interface IF2 – Variant | 1x RJ45 shielded |
| Interface IF2 – Line length | Max. 100 m between 2 nodes (segment length) |
| Interface IF2 – Max. transfer rate | 10/100 Mbit/s |
| Interface IF3 – Type | USB 2.0 |
| Interface IF3 – Variant | Type A |
| Interface IF3 – Current-carrying capacity | 0.49 A |
| Interface IF4 – Type | USB 2.0 |
| Interface IF4 – Variant | Type A |
| Interface IF4 – Current-carrying capacity | ≥Rev. E0: 0.20 A; <Rev. E0: 0.10 A |
| Interface IF5 – Fieldbus | X2X Link master |
Electrical properties
| Nominal voltage | 24 VDC -15% / +20% |
| Max. power consumption | 14.4 W (note: Measured while all communication interfaces in use.) |
| Reverse polarity protection | Yes |
| Electrical isolation | IF1, IF2 and IF5 isolated from each other, from other interfaces and from the base device |
Operating conditions
| Permissible mounting orientations – Standard mounting orientation | Vertical |
| Permissible mounting orientations – Inclination | ±25° |
| Permissible mounting orientations – Rotation | In 90° increments (portrait/landscape) |
| Installation elevation above sea level – 0 to 2000 m | No limitation |
| Installation elevation above sea level – >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | Front: IP65, Back: IP20 |
| Degree of protection per UL 50 | Front: Type 4X indoor use only |
Ambient conditions
| Temperature – Operation | 0 to 50°C |
| Temperature – Storage | -20 to 70°C |
| Temperature – Transport | -20 to 70°C |
| Relative humidity | See temperature/humidity diagram. |
Mechanical properties
| Front – Design | Anthracite gray pinstripe |
| Dimensions – Width | 172 mm |
| Dimensions – Height | 140 mm |
| Dimensions – Depth | 51 mm |
| Weight | 0.6 kg |
Accessories
Optional accessories (7)
| 0TB6102.2110-01 | Terminal blocks — Accessory terminal block, 2-pin (3.81), cage clamp terminal block 1.5 mm² |
| 0TB5104.2110-01 | Terminal blocks — Accessory terminal block, 4-pin (2.5), cage clamp terminal block 0.5 mm² |
| 9A0013.01 | Accessories — Stylus pen for resistive touch screen |
| 6ACCRPP3.0000-000 | Other — This installation kit contains the following replacement parts: 9 retaining clips; 1x 2-pin cage clamp terminal block; 1x 2-pin screw clamp… |
| 0TB6102.2010-01 | Terminal blocks — Accessory terminal block, 2-pin (3.81), screw clamp terminal block 1.5 mm² |
| 5MMUSB.4096-01 | USB accessories — 4 GB; USB 1.1, USB 2.0; High transfer rate; High data storage; Ambient temperature during operation: 0 to 70°C USB 2.0 flash drive 4096 MB… |
| 5MMUSB.2048-01 | USB accessories — 2 GB; USB 1.1, USB 2.0; High transfer rate; High data retention; Ambient temperature during operation: 0 to 70°C USB 2.0 flash drive 2048 M… |
Downloads & documentation
Official documents from B&R, downloaded directly from the manufacturer.
Data sheets & manuals
CAD & dimension drawings
Certificates (1)
4PPC70.0573-20B: frequently asked questions
When can 4PPC70.0573-20B be shipped?
4PPC70.0573-20B is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 4PPC70.0573-20B in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 4PPC70.0573-20B and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 4PPC70.0573-20B, subject to availability and destination.
More B&R parts







