Home / I/O systems / X20 System / Bus controllers

Bus controllers Parts

B&R X20BC80G3 – X20 bus controller, 1 EtherCAT interface, supports extensions with X20 EtherCAT junction modules, 2x RJ45, order bus base, power supply module and terminal bloc

B&R

X20 bus controller, 1 EtherCAT interface, supports extensions with X20 EtherCAT junction modules, 2x RJ45, order bus base, power supply module and terminal bloc

B&R

X20BC0087-10

Bus controller, modbus TCP/UDP slave

B&R

X20BC008U

Bus controller, OPC UA server

B&R

X20BC008T

Communication technology: OPC UA Field eXchange (FX)

B&R

X20BC0043-10

Bus controller, CANopen slave

B&R

X20BC0063

Bus controller, PROFIBUS DP V0 slave

B&R

X20BC0073

Bus controller, CAN I/O slave

B&R

X20BC0083

Bus controller, POWERLINK (V1/V2) controlled node

B&R

X20BC0087

Bus controller, modbus TCP/UDP slave

B&R

X20BC0088

Bus controller, etherNet/IP adapter (slave)

B&R

X20BC00E3

Bus controller, PROFINET IO slave

B&R

X20BC00G3

Bus controller, etherCAT slave

B&R

X20BC0143-10

Bus controller, CANopen slave

Compare Bus controllers

Key specifications of the parts listed on this page, taken from the manufacturer's data sheets.

MPN	Bus controller	Power consumption – Bus	Fieldbus	Variant	Transfer rate
X20BC0087-10	Modbus TCP/UDP slave	2 W	Modbus TCP/UDP slave	2x shielded RJ45 (switch)	10/100 Mbit/s
X20BC008U	OPC UA server	2.5 W	OPC UA server	2x shielded RJ45 (switch)	100 Mbit/s
X20BC008T	OPC UA FX	3.5 W	OPC UA Field eXchange (FX)	2x shielded RJ45 (switch)	1 Gbit/s
X20BC0043-10	CANopen slave	1.5 W (rev. <H0: 2 W)	CANopen slave	5-pin male multipoint connector	Max. 1 Mbit/s
X20BC0063	PROFIBUS DP V0 slave	2.3 W	PROFIBUS DP V0 slave	—	Max. 12 Mbit/s
X20BC0073	CAN I/O slave	1.5 W	CAN I/O slave	—	Max. 1 Mbit/s
X20BC0083	POWERLINK (V1/V2) controlled node	2 W	POWERLINK (V1/V2) controlled node	2x shielded RJ45 (hub)	100 Mbit/s
X20BC0087	Modbus TCP/UDP slave	2 W	Modbus TCP/UDP slave	2x shielded RJ45 (switch)	10/100 Mbit/s
X20BC0088	EtherNet/IP adapter (slave)	2 W	EtherNet/IP adapter (slave)	2x shielded RJ45 (switch)	10/100 Mbit/s
X20BC00E3	PROFINET IO slave	2.5 W	PROFINET IO slave	2x shielded RJ45 (switch)	100 Mbit/s
X20BC00G3	EtherCAT slave	1.68 W	EtherCAT slave	2x shielded RJ45	100 Mbit/s
X20BC0143-10	CANopen slave	2 W	CANopen slave	9-pin male DSUB connector	Max. 1 Mbit/s

Common to all listed parts

Diagnostics – Module status	Yes, using LED status indicator and software
Certifications – CE	Yes
Certifications – UKCA	Yes
Certifications – UL	cULus E115267; Industrial control equipment
Mounting orientation – Horizontal	Yes
Mounting orientation – Vertical	Yes
Installation elevation above sea level – 0 to 2000 m	No limitation
Installation elevation above sea level – >2000 m	Reduction of ambient temperature by 0.5°C per 100 m