B&R X20DO4332-1

Name: B&R X20DO4332-1
Brand: B&R
SKU: X20DO4332-1

제조사 부품번호: X20DO4332-1 · 브랜드: B&R

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Digital outputs
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

X20DO4332-1은(는) 언제 배송될 수 있나요?

X20DO4332-1은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

X20DO4332-1을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — X20DO4332-1에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 X20DO4332-1에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

4 digital outputs with 2 ASource circuit3-wire connections24 VDC and GND for actuator power supplyIntegrated output protectionOSP modePWM mode The module is equipped with 4 outputs with 3-wire connections as well as 24 VDC and GND for the actuator power supply. The outputs are designed for a source circuit. The nominal output current is 2 A.

사양

Specifications

I/O module	4 digital outputs 24 VDC for 3-wire connections
B&R ID code	0xF5F9
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Outputs	Yes, using LED status indicator and software (output error status)
Bus	0.1 W (Rev. <D0: 0.16 W)
Internal I/O	0.49 W
Additional power dissipation caused by actuators (resistive) [W]	+1 (Rev. <D0: +1.6)
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
DNV	Temperature: B (0 to 55°C)Humidity: B (up to 100%)Vibration: B (4 g)EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33BTemperature: 5 - 55°CVibration: 4 gEMC: Bridge and open deck
Variant	Current-sourcing FET
Nominal voltage	24 VDC
Switching voltage	24 VDC -15% / +20%
Nominal output current	2 A
Total nominal current	8 A
Connection type	3-wire connections
Output circuit	Source
Output protection	Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current")Internal freewheeling diode for switching inductive loads
Actuator power supply	Max. 12 W
Diagnostic status	Output monitoring with 10 ms delay
Leakage current when the output is switched off	5 µA
RDS(on)	60 mΩ (Rev. <D0: 100 mΩ)
Peak short-circuit current	<4 A
Switch-on in the event of overload shutdown or short-circuit shutdown	Approx. 10 ms (depends on the module temperature)
0 → 1	<300 µs
1 → 0	<300 µs
Resistive load	Max. 500 Hz
Braking voltage when switching off inductive loads	0.6 V
Insulation voltage between channel and bus	500 Veff
Additional functions	Outputs can be connected in parallel to increase the output current.
Quantity	4
Nominal current	2 A
PWM frequency	15.25 to 1000 Hz
Configurable dither	0 to 250 Hz, 1 to 25% of the period duration
Period duration resolution	1000 to 65535 µs in 1 µs steps
Voltage	Module power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 500 mA	Max. 2 V
Short-circuit proof	Yes
Electrical isolation	Channel isolated from busChannel not isolated from channel and I/O power supply
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Derating".
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB12 separately.Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm