B&R X20DO4332-1

Name: B&R X20DO4332-1
Brand: B&R
SKU: X20DO4332-1

型番（MPN）: X20DO4332-1 · ブランド: B&R

価格はお問い合わせください

見積もりを依頼する

12か月保証（新品）・3か月保証（中古・整備済み）

30日間返品可能、未使用品は返品手数料無料

配送業者

基本情報

在庫状況	お問い合わせにより確認
カテゴリー	Digital outputs
ライフサイクル	active
保証	12か月（新品）・3か月（中古・整備済み）

配送・在庫状況

X20DO4332-1はいつ発送できますか？

X20DO4332-1はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。

X20DO4332-1を直接引き取ることはできますか？

オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。

エクスプレス配送は利用できますか？

はい — X20DO4332-1の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。

工場が停止しており緊急で必要です — 対応可能ですか？

重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — X20DO4332-1について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。

4 digital outputs with 2 ASource circuit3-wire connections24 VDC and GND for actuator power supplyIntegrated output protectionOSP modePWM mode The module is equipped with 4 outputs with 3-wire connections as well as 24 VDC and GND for the actuator power supply. The outputs are designed for a source circuit. The nominal output current is 2 A.

仕様

Specifications

I/O module	4 digital outputs 24 VDC for 3-wire connections
B&R ID code	0xF5F9
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Outputs	Yes, using LED status indicator and software (output error status)
Bus	0.1 W (Rev. <D0: 0.16 W)
Internal I/O	0.49 W
Additional power dissipation caused by actuators (resistive) [W]	+1 (Rev. <D0: +1.6)
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
DNV	Temperature: B (0 to 55°C)Humidity: B (up to 100%)Vibration: B (4 g)EMC: B (bridge and open deck)
CCS	Yes
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33BTemperature: 5 - 55°CVibration: 4 gEMC: Bridge and open deck
Variant	Current-sourcing FET
Nominal voltage	24 VDC
Switching voltage	24 VDC -15% / +20%
Nominal output current	2 A
Total nominal current	8 A
Connection type	3-wire connections
Output circuit	Source
Output protection	Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current")Internal freewheeling diode for switching inductive loads
Actuator power supply	Max. 12 W
Diagnostic status	Output monitoring with 10 ms delay
Leakage current when the output is switched off	5 µA
RDS(on)	60 mΩ (Rev. <D0: 100 mΩ)
Peak short-circuit current	<4 A
Switch-on in the event of overload shutdown or short-circuit shutdown	Approx. 10 ms (depends on the module temperature)
0 → 1	<300 µs
1 → 0	<300 µs
Resistive load	Max. 500 Hz
Braking voltage when switching off inductive loads	0.6 V
Insulation voltage between channel and bus	500 Veff
Additional functions	Outputs can be connected in parallel to increase the output current.
Quantity	4
Nominal current	2 A
PWM frequency	15.25 to 1000 Hz
Configurable dither	0 to 250 Hz, 1 to 25% of the period duration
Period duration resolution	1000 to 65535 µs in 1 µs steps
Voltage	Module power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 500 mA	Max. 2 V
Short-circuit proof	Yes
Electrical isolation	Channel isolated from busChannel not isolated from channel and I/O power supply
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Derating".
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order 1x terminal block X20TB12 separately.Order 1x bus module X20BM11 separately.
Pitch	12.5+0.2 mm