B&R X67BC81RT.L12
请求报价
产品概览
| 库存情况 | 需按需确认 |
| 分类 | Bus controller modules |
| 生命周期状态 | active |
| 保修 | 12个月（全新）· 3个月（二手/翻新） |
| 重量 | 320 kg |
发货与库存
X67BC81RT.L12 何时可以发货？
X67BC81RT.L12 属于按需采购产品——请申请报价，我们会为这一具体单品确认准确的库存情况及发货时间。
可以亲自到店提取 X67BC81RT.L12 吗？
可以在我们位于荷兰格罗宁根的仓库安排自提——请在下单前联系我们，确认库存情况并预约提货时间。
是否提供快递服务？
可以——在为 X67BC81RT.L12 申请报价时告诉我们，我们会在回复中附上快递发货选项。
我们的工厂停产了，急需这个零部件——你们能帮忙吗？
如遇紧急故障，请直接致电 +31 (0)50-7110348 或发邮件至 sales@partnerplc.com 联系我们——我们可根据库存情况及目的地，为 X67BC81RT.L12 安排当日快递或专车加急配送。
POWERLINKreACTION Technology moduleIntegrated hub for efficient cabling4 digital inputs5 digital channels, configurable as inputs or outputs2 analog inputs ±10 V1 analog input ±10 V1 ABR incremental encoder input 5 V5 V and 24 V encoder power supply integrated in the encoder connectorI/O configuration and firmware update via the fieldbusIntegrated connection to local expansions via X2X Link for 250 additional modulesCycle time configurable starting at 200 µs for local expansions The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler. Additional X2X Link I/O nodes (X67 modules or other modules based on X2X Link) can be connected using the integrated X2X Link connection. Mechanically, POWERLINK is connected via an IP67-rated standard D-coded M12 Ethernet connector.POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed:: www.ethernet-powerlink.org.Ultrafast reACTION Technology makes it possible to control I/O channels with response times down to 1 μs. All of the commands that can be used for reACTION programs are provided as function blocks in special libraries (e.g. AsIORTI). Programming using the standard Function Block Diagram (FBD) editor in Automation Studio is compliant with IEC 61131-3.
技术规格
Specifications
| Bus controller | 0xE2DC |
| Inputs/Outputs | M12, 5-pin, A-coded |
| Insulation voltage between channel and bus | 500 Veff, 1 min |
| Nominal voltage | 24 VDC |
| Internal I/O module | 0xE2DF |
| Status indicators | I/O function per channel, supply voltage, bus function |
| Outputs | Yes, using LED status indicator and software |
| I/O power supply | M8, 4-pin |
| Dynamic node allocation (DNA) | Yes |
| reACTION-capable I/O channels | Yes |
| Fieldbus | 200 μs |
| X2X Link | 200 μs |
| Encoder | M12, 12-pin, A-coded |
| Power output | 15 W X2X Link power supply for I/O modules |
| Internal I/O | 6 W |
| X2X Link power supply | 19.6 W at maximum power output for connected I/O modules |
| Type | 16 Mbit flash memory |
| Data retention | 20 years at 55°C |
| Guaranteed erase/write cycles | 100,000 |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 - Max. 60°C TÜV 05 ATEX 7201X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| Variant | Push/Pull |
| Line length | Max. 100 m between 2 stations (segment length) |
| Transfer rate | 100 Mbit/s |
| Physical layer | 100BASE-TX |
| Half-duplex | Yes |
| Full-duplex | No |
| Autonegotiation | Yes |
| Auto-MDI/MDIX | Yes |
| Hub propagation delay | 0.96 to 1 µs |
| Synchronization between bus systems possible | Yes |
| 5 VDC | Module-internal, max. 0.3 A summation current |
| 24 VDC | Module-internal, max. 0.5 A summation current |
| Voltage range | 18 to 30 VDC |
| Integrated protective function | Reverse polarity protection |
| Sensor/Actuator power supply | Max. 12 W |
| Voltage | I/O power supply minus voltage drop for short-circuit protection |
| Voltage drop for short-circuit protection at 0.5 A | Max. 2 VDC |
| Summation current | Max. 0.5 A |
| Short-circuit proof | Yes |
| Quantity | 1 |
| Encoder inputs | DI 5 to DI 7, 5 V, symmetrical DI 1 to DI 4 and DI 8 to DI 9, 24 V, asymmetrical |
| Counter size | 32-bit |
| Input frequency | DI 1 to DI 7: 250 kHz DI 8 and DI 9: 100 kHz |
| Evaluation | 4x |
| Encoder power supply | 5 V: Module-internal, max. 0.3 A 24 V: Module-internal, max. 0.5 A |
| Overload characteristics of encoder power supply | Short-circuit proof, overload-proof |
| Input circuit | Sink |
| Insulation voltage between encoder and bus | 500 Veff |
| Hardware | ≤50 ns |
| Software | Default 200 ns, configurable between 200 ns and 5 ms in 20 ns intervals |
| Input characteristics per EN 61131-2 | Type 1 |
| Input voltage | 24 VDC -15/+20% |
| Channel 1 and 2 | Typ. 3 kΩ |
| Channel 3 and 4 | Typ. 8 kΩ |
| Channel 8 and 9 | Typ. 40 kΩ |
| Sensor power supply | 0.5 A summation current |
| Low | <5 VDC |
| High | <15 VDC |
| Input | ±10 V |
| Input type | Single-ended |
| Digital converter resolution | 12-bit |
| Conversion time | 2 µs |
| Output format | Example: INT 0x8001 - 0x7FFF / 1 LSB = 0x0010 = 4.882 mV |
| Input protection | Protection against wiring with supply voltage |
| Open-circuit detection | Yes, using software |
| Reverse polarity protection | Yes |
| Permissible input signal | ±30 V |
| Undershoot | 0x8001 |
| Overshoot | 0x7FFF |
| Conversion procedure | Successive approximation |
| Gain | 0.15% |
| Offset | 0.05% |
| Crosstalk between channels | -70 dB |
| Nonlinearity | <0.15% |
| Output protection | Short-circuit proof |
| Output current | Max. 65 mA |
| Diagnostic status | Overload monitoring |
| Switching frequency | Max. 500 kHz |
| Nominal output current | 0.4 A |
| Braking voltage when switching off inductive loads | 50 VDC |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Approx. 25 ms |
| Peak short-circuit current | <1 A |
| Switching voltage | 24 VDC (-15/+20%) |
| Resistive load | Max. 100 kHz |
| Inductive load | Max. 100 kHz |
| 0 → 1 | <1 µs |
| 1 → 0 | <1 µs |
| Output | ±10 V |
| Settling time on output change over entire range | 2.5 µs |
| Switch on/off behavior | Internal enable relay for startup |
| Load per channel | Max. ±10 mA, load ≥1 kΩ |
| Output filter | First-order low-pass filter / cutoff frequency 2.5 kHz |
| Max. gain drift | 0.012%/°C |
| Max. offset drift | 0.001%/°C |
| Error caused by load change | Max. 0.01%, from 10 MΩ → 1 kΩ, resistive |
| Output response when the power supply is switched on/off | An enable relay is switched on at a defined value ≠ 0, default setting = 10 kΩ to GND |
| Current limiting | ±40 mA |
| To actuator or I/O power supply | Yes |
| To GND | Yes |
| Electrical isolation | Bus isolated from POWERLINK and channel Channel not isolated from channel |
| Any | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
| Operation | -25 to 60°C |
| Derating | - |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Width | 53 mm |
| Height | 155 mm |
| Depth | 42 mm |
| Weight | 320 g |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |
