产品概览
| 库存情况 | 需按需确认 |
| 分类 | Digital outputs |
| 生命周期状态 | active |
| 保修 | 12个月（全新）· 3个月（二手/翻新） |
发货与库存
X20DO6325 何时可以发货？
X20DO6325 属于按需采购产品——请申请报价，我们会为这一具体单品确认准确的库存情况及发货时间。
可以亲自到店提取 X20DO6325 吗？
可以在我们位于荷兰格罗宁根的仓库安排自提——请在下单前联系我们，确认库存情况并预约提货时间。
是否提供快递服务？
可以——在为 X20DO6325 申请报价时告诉我们，我们会在回复中附上快递发货选项。
我们的工厂停产了，急需这个零部件——你们能帮忙吗？
如遇紧急故障，请直接致电 +31 (0)50-7110348 或发邮件至 sales@partnerplc.com 联系我们——我们可根据库存情况及目的地，为 X20DO6325 安排当日快递或专车加急配送。
6 digital outputsSource connection2-wire connectionsGND for signal supplyIntegrated output protection1-wire connection type with 6-pin terminal blockDiagnostic functions (open line, short circuit and overload/overtemperature)OSP mode The module is equipped with six outputs for 1 or 2-wire connections with diagnostic functions. The X20 6-pin terminal block can be used for universal 1-line wiring. Two-line wiring can be implemented using the 12-pin terminal block. The outputs on the module are designed for source connections.
技术规格
Specifications
| I/O module | 6 digital outputs 24 VDC for 1- or 2-wire connections with diagnostic function |
| B&R ID code | 0xE284 |
| Status indicators | I/O function per channel, diagnostics per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Status outputs | Yes, using LED status indicator and software |
| Diagnostic outputs | Yes, using LED status indicator and software |
| Bus | 0.15 W |
| Internal I/O | 0.4 W |
| Additional power dissipation caused by actuators (resistive) [W] | 0.225 |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| CCS | Yes |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| Variant | Current-sourcing FET |
| Nominal voltage | 24 VDC |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | 0.5 A |
| Total nominal current | 3 A |
| Connection type | 1- or 2-wire connections |
| Output circuit | Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current") Internal freewheeling diode for switching inductive loads (see section "Switching inductive loads") |
| Open circuit | At <1 mA (typ.), detected if output OFF, delay approx. 10 ms |
| Short circuit to 24 VDC | Detected if output OFF, delay approx. 10 ms |
| Short circuit to GND | Detected if output ON, delay approx. 10 ms |
| Overload/Overtemperature | Detected if output ON, delay approx. 10 ms |
| Leakage current when the output is switched off | <160 μA |
| RDS(on) | 150 mΩ |
| Peak short-circuit current | <40 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Depends on the module temperature |
| 0 → 1 | <100 μs |
| 1 → 0 | <300 μs |
| Resistive load | Max. 2000 Hz |
| Inductive load | See section "Switching inductive loads". |
| Braking voltage when switching off inductive loads | 45 to 52 VDC |
| Insulation voltage between channel and bus | 510 Veff |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel and I/O power supply |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB06 or X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |
