产品概览
| 库存情况 | 需按需确认 |
| 分类 | Counter functions |
| 生命周期状态 | active |
| 保修 | 12个月（全新）· 3个月（二手/翻新） |
发货与库存
X20cDC2395 何时可以发货？
X20cDC2395 属于按需采购产品——请申请报价，我们会为这一具体单品确认准确的库存情况及发货时间。
可以亲自到店提取 X20cDC2395 吗？
可以在我们位于荷兰格罗宁根的仓库安排自提——请在下单前联系我们，确认库存情况并预约提货时间。
是否提供快递服务？
可以——在为 X20cDC2395 申请报价时告诉我们，我们会在回复中附上快递发货选项。
我们的工厂停产了，急需这个零部件——你们能帮忙吗？
如遇紧急故障，请直接致电 +31 (0)50-7110348 或发邮件至 sales@partnerplc.com 联系我们——我们可根据库存情况及目的地，为 X20cDC2395 安排当日快递或专车加急配送。
24 VDC encoder inputsSSI, ABR, AB or event counters for inputsPulse width modulation for outputs24 VDC and GND for encoder supply This module is a multifunctional counter module. It can be connected to one SSI encoder, one ABR encoder, two AB encoders or four event counters. Two outputs are available for pulse width modulation. The functions can also be mixed.
技术规格
Specifications
| I/O module | 1 SSI absolute encoders 24 V, 1 ABR incremental encoders 24 V, 2 AB incremental encoders 24 V, 4x event counter or 2x pulse width modulation, time measurement, relative timestamp |
| Input voltage | 24 VDC -15% / +20% |
| B&R ID code | 0xE503 |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Outputs | Yes, using LED status indicator and software (output state) |
| Bus | 0.01 W |
| Internal I/O | 1.4 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| Type of signal lines | Shielded lines must be used for all signal lines. |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| Quantity | 2 |
| Encoder inputs | 24 V, asymmetrical |
| Counter size | 16-bit |
| Input frequency | Max. 100 kHz |
| Evaluation | Each edge, cyclic counter |
| Encoder power supply | Module-internal, max. 600 mA |
| Overload characteristics of encoder power supply | Short-circuit proof, overload-proof |
| Max. transfer rate | 125 kbit/s |
| Coding | Gray/Binary |
| CLK: Output current | Max. 100 mA |
| Nominal voltage | 24 VDC |
| Signal form | Square wave pulse |
| Input current at 24 VDC | Approx. 1.3 mA |
| Input resistance | 18.4 kΩ |
| Insulation voltage between channel and bus | 500 Veff |
| Counter frequency | 200 kHz |
| Hardware | ≤2 µs |
| Software | - |
| Low | <5 VDC |
| High | >15 VDC |
| Possible measurements | Gate time, period duration, edge offset for various channels |
| Measurements per module | Up to 9 |
| Measurements per channel | Up to 2 |
| Internal | 8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 125 kHz, 62.5 kHz |
| Measurement type | Continuous or triggered |
| Variant | Push / Pull / Push-Pull |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | 0.1 A |
| Total nominal current | 0.2 A |
| Output circuit | Sink or source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Period duration | 41.6 µs to 1.36 s |
| Factor for period duration | n/48000 s, n = 2 to 65535 |
| Pulse duration | 0 to 100% |
| Resolution for pulse duration | 0.1% |
| Actuator power supply | Module-internal, max. 600 mA |
| Diagnostic status | Output monitoring |
| Leakage current when the output is switched off | Max. 25 µA |
| Residual voltage | <0.9 V at 0.1 A nominal current |
| Peak short-circuit current | <10 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Approx. 10 ms (depends on the module temperature) |
| 0 → 1 | <2 µs |
| 1 → 0 | <2 µs |
| Resistive load | Max. 24 kHz |
| Inductive load | See section "Switching inductive loads". |
| Braking voltage when switching off inductive loads | Switching voltage + 0.6 VDC |
| Electrical isolation | Bus isolated from encoder and output Output not isolated from output and encoder Encoder not isolated from encoder |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | Up to 100%, condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20cBM11 separately. |
| Pitch | 12.5+0.2 mm |
12个月保修适用于所有全新库存
3个月保修适用于二手及翻新零部件
30天退货未使用零部件退货免收上架费
全球发货全球快速可追踪配送
