B&R X20cDC2395

Name: B&R X20cDC2395
Brand: B&R
SKU: X20cDC2395

MPN: X20cDC2395 · Marke: B&R

Preis auf Anfrage

Angebot anfordern

12 Monate Garantie (neu) · 3 Monate (gebraucht/aufbereitet)

30 Tage Rückgaberecht, keine Rücknahmegebühr auf ungenutzte Teile

Versand über

Kurzübersicht

Verfügbarkeit	Bestätigung auf Anfrage
Kategorie	Counter functions
Lebenszyklus	active
Garantie	12 Monate (neu) · 3 Monate (gebraucht/aufbereitet)

Versand & Verfügbarkeit

Wann kann X20cDC2395 versendet werden?

X20cDC2395 wird auf Anfrage beschafft — fordern Sie ein Angebot an, wir bestätigen die genaue Verfügbarkeit und Lieferzeit für dieses konkrete Teil.

Kann ich X20cDC2395 persönlich abholen?

Eine Abholung in unserem Lager in Groningen, Niederlande ist eventuell möglich — kontaktieren Sie uns vor der Bestellung, um Verfügbarkeit und einen Abholtermin zu klären.

Ist Expressversand verfügbar?

Ja — erwähnen Sie es bei Ihrer Angebotsanfrage für X20cDC2395, wir nennen Ihnen in unserer Antwort die Expressversandoptionen.

Unser Betrieb steht still und wir brauchen es dringend — können Sie helfen?

Bei einem kritischen Ausfall kontaktieren Sie uns direkt unter +31 (0)50-7110348 oder sales@partnerplc.com — wir prüfen dann Same-Day-Kurier- oder Taxi-/Hotshot-Lieferung für X20cDC2395, abhängig von Verfügbarkeit und Zielort.

24 VDC encoder inputsSSI, ABR, AB or event counters for inputsPulse width modulation for outputs24 VDC and GND for encoder supply This module is a multifunctional counter module. It can be connected to one SSI encoder, one ABR encoder, two AB encoders or four event counters. Two outputs are available for pulse width modulation. The functions can also be mixed.

Spezifikationen

Specifications

I/O module	1 SSI absolute encoders 24 V, 1 ABR incremental encoders 24 V, 2 AB incremental encoders 24 V, 4x event counter or 2x pulse width modulation, time measurement, relative timestamp
Input voltage	24 VDC -15% / +20%
B&R ID code	0xE503
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Outputs	Yes, using LED status indicator and software (output state)
Bus	0.01 W
Internal I/O	1.4 W
Additional power dissipation caused by actuators (resistive) [W]	-
Type of signal lines	Shielded lines must be used for all signal lines.
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck)
LR	ENV1
KR	Yes
ABS	Yes
BV	EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck
Quantity	2
Encoder inputs	24 V, asymmetrical
Counter size	16-bit
Input frequency	Max. 100 kHz
Evaluation	Each edge, cyclic counter
Encoder power supply	Module-internal, max. 600 mA
Overload characteristics of encoder power supply	Short-circuit proof, overload-proof
Max. transfer rate	125 kbit/s
Coding	Gray/Binary
CLK: Output current	Max. 100 mA
Nominal voltage	24 VDC
Signal form	Square wave pulse
Input current at 24 VDC	Approx. 1.3 mA
Input resistance	18.4 kΩ
Insulation voltage between channel and bus	500 Veff
Counter frequency	200 kHz
Hardware	≤2 µs
Software	-
Low	<5 VDC
High	>15 VDC
Possible measurements	Gate time, period duration, edge offset for various channels
Measurements per module	Up to 9
Measurements per channel	Up to 2
Internal	8 MHz, 4 MHz, 2 MHz, 1 MHz, 500 kHz, 250 kHz, 125 kHz, 62.5 kHz
Measurement type	Continuous or triggered
Variant	Push / Pull / Push-Pull
Switching voltage	24 VDC -15% / +20%
Nominal output current	0.1 A
Total nominal current	0.2 A
Output circuit	Sink or source
Output protection	Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads
Period duration	41.6 µs to 1.36 s
Factor for period duration	n/48000 s, n = 2 to 65535
Pulse duration	0 to 100%
Resolution for pulse duration	0.1%
Actuator power supply	Module-internal, max. 600 mA
Diagnostic status	Output monitoring
Leakage current when the output is switched off	Max. 25 µA
Residual voltage	<0.9 V at 0.1 A nominal current
Peak short-circuit current	<10 A
Switch-on in the event of overload shutdown or short-circuit shutdown	Approx. 10 ms (depends on the module temperature)
0 → 1	<2 µs
1 → 0	<2 µs
Resistive load	Max. 24 kHz
Inductive load	See section "Switching inductive loads".
Braking voltage when switching off inductive loads	Switching voltage + 0.6 VDC
Electrical isolation	Bus isolated from encoder and output Output not isolated from output and encoder Encoder not isolated from encoder
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	Up to 100%, condensing
Note	Order 1x terminal block X20TB12 separately. Order 1x bus module X20cBM11 separately.
Pitch	12.5+0.2 mm