产品概览
| 库存情况 | 需按需确认 |
| 分类 | Single-phase power supplies |
| 生命周期状态 | active |
| 保修 | 12个月（全新）· 3个月（二手/翻新） |
| 重量 | 400 kg |
发货与库存
0PS1042.2 何时可以发货？
0PS1042.2 属于按需采购产品——请申请报价，我们会为这一具体单品确认准确的库存情况及发货时间。
可以亲自到店提取 0PS1042.2 吗？
可以在我们位于荷兰格罗宁根的仓库安排自提——请在下单前联系我们，确认库存情况并预约提货时间。
是否提供快递服务？
可以——在为 0PS1042.2 申请报价时告诉我们，我们会在回复中附上快递发货选项。
我们的工厂停产了，急需这个零部件——你们能帮忙吗？
如遇紧急故障，请直接致电 +31 (0)50-7110348 或发邮件至 sales@partnerplc.com 联系我们——我们可根据库存情况及目的地，为 0PS1042.2 安排当日快递或专车加急配送。
100 to 240 VAC wide-range inputCan be connected in parallel for increased capacity and redundancyReliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)International certification packageWide temperature range from -25 to 70°CExtra flat designEasy DIN rail or wall mounting 24 VDC power supply, 1-phase, 4.2 A, input 100 to 240 VAC, wide range, top-hat rail installation
技术规格
Specifications
| Status display | Green LED (DC OK), threshold value Uout = 21.5 V |
| Input - Output | 4 kV AC (type test) 2 kV AC (routine test) |
| Connection type | Screw terminal |
| Wire end sleeves | Flexible cables require wire end sleeves in order to fulfill EN 62368 / UL 60950 |
| Flexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
| Inflexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
| Wire stripping length | 6.5 mm (input/output) |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Evaluation ongoing |
| UL | cULus E123528 Industrial control equipment |
| Nominal input voltage | 100 to 240 VAC |
| Input voltage | AC 85 to 264 V (wide range), 45 to 65 Hz DC 95 to 250 V |
| Input current | Approx. 1.3 A (120 VAC) Approx. 0.8 A (230 VAC) |
| Inrush current limiting | <15 A (typical) |
| I2t | <1 A2s |
| Power failure bypass | >20 ms (120 VAC) >100 ms (230 VAC) |
| Switch-on time | <0.5 s (typical) |
| Protective circuit | Transient surge protection with varistor |
| Internal fuse | 4 A slow-blow |
| Required line fuse for line protection | 6 A (characteristic B) 10 A (characteristic B) 16 A (characteristic B) |
| Nominal voltage | 24 VDC ±1% |
| Output power | 100 W |
| Setting range for output voltage | 22.5 to 29.5 VDC (>24 VDC power constant) |
| -25 to 40°C | 4.4 A |
| 40 to 55°C | 4.2 A |
| >55°C | Derating: 2.5% per °C |
| Current limiting | Max. 6.5 A |
| Control deviation | <1% (static load change 10 to 90%) <2% (dynamic load change 10 to 90%) <0.1% (input voltage change ±10%) |
| Rise time | <0.5 s (UOUT (10 to 90%)) |
| Residual ripple | <25 mVSS (at nominal values) |
| Switching peaks | <25 mVSS (at nominal values) |
| Can be connected in parallel | Yes, to establish redundancy and increase capacity |
| Can be connected in series | Yes |
| Protection against internal overvoltages | Yes, limited to approximately 35 VDC |
| Protective functions | Output protected against continuous short circuit, open circuit and overload |
| Power back immunity | Max. 35 VDC |
| Output noise suppression | Device complies with EN 55011 (class B) |
| Efficiency | >88% (at 230 VAC and nominal values) |
| MTBF | >500,000 h, per IEC 61709 (SN 29500) |
| Rated load | Max. 13.2 W |
| No-load operation | Max. 0.7 W |
| Maximum | 6000 m |
| Ventilation/Cooling | Normal convection, no fan required |
| Degree of protection per EN 60529 | IP20 |
| Protection class | II |
| Operation | 30 g in each direction, per IEC 60068-2-27 |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Pollution degree | 2, per EN 50178 |
| Climate category | 3K3, per EN 60721 |
| Installation | Easy top-hat rail installation (DIN rail NS 35, EN 60715) or wall mounting |
| Width | 90 mm |
| Height | 90 mm |
| Depth | 61 mm |
| Weight | 400 g |
12个月保修适用于所有全新库存
3个月保修适用于二手及翻新零部件
30天退货未使用零部件退货免收上架费
全球发货全球快速可追踪配送
