B&R 0PS1042.2
Richiedi un preventivo
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Single-phase power supplies |
| Ciclo di vita | active |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
| Peso | 400 kg |
Spedizione e disponibilità
Quando può essere spedito 0PS1042.2?
0PS1042.2 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare 0PS1042.2 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per 0PS1042.2 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per 0PS1042.2, in base a disponibilità e destinazione.
100 to 240 VAC wide-range inputCan be connected in parallel for increased capacity and redundancyReliable operation due to long power failure bypass function under full load and high MTBF (>500,000 h)International certification packageWide temperature range from -25 to 70°CExtra flat designEasy DIN rail or wall mounting 24 VDC power supply, 1-phase, 4.2 A, input 100 to 240 VAC, wide range, top-hat rail installation
Specifiche
Specifications
| Status display | Green LED (DC OK), threshold value Uout = 21.5 V |
| Input - Output | 4 kV AC (type test) 2 kV AC (routine test) |
| Connection type | Screw terminal |
| Wire end sleeves | Flexible cables require wire end sleeves in order to fulfill EN 62368 / UL 60950 |
| Flexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
| Inflexible | 0.2 to 2.5 mm² / 24 to 12 AWG |
| Wire stripping length | 6.5 mm (input/output) |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Evaluation ongoing |
| UL | cULus E123528 Industrial control equipment |
| Nominal input voltage | 100 to 240 VAC |
| Input voltage | AC 85 to 264 V (wide range), 45 to 65 Hz DC 95 to 250 V |
| Input current | Approx. 1.3 A (120 VAC) Approx. 0.8 A (230 VAC) |
| Inrush current limiting | <15 A (typical) |
| I2t | <1 A2s |
| Power failure bypass | >20 ms (120 VAC) >100 ms (230 VAC) |
| Switch-on time | <0.5 s (typical) |
| Protective circuit | Transient surge protection with varistor |
| Internal fuse | 4 A slow-blow |
| Required line fuse for line protection | 6 A (characteristic B) 10 A (characteristic B) 16 A (characteristic B) |
| Nominal voltage | 24 VDC ±1% |
| Output power | 100 W |
| Setting range for output voltage | 22.5 to 29.5 VDC (>24 VDC power constant) |
| -25 to 40°C | 4.4 A |
| 40 to 55°C | 4.2 A |
| >55°C | Derating: 2.5% per °C |
| Current limiting | Max. 6.5 A |
| Control deviation | <1% (static load change 10 to 90%) <2% (dynamic load change 10 to 90%) <0.1% (input voltage change ±10%) |
| Rise time | <0.5 s (UOUT (10 to 90%)) |
| Residual ripple | <25 mVSS (at nominal values) |
| Switching peaks | <25 mVSS (at nominal values) |
| Can be connected in parallel | Yes, to establish redundancy and increase capacity |
| Can be connected in series | Yes |
| Protection against internal overvoltages | Yes, limited to approximately 35 VDC |
| Protective functions | Output protected against continuous short circuit, open circuit and overload |
| Power back immunity | Max. 35 VDC |
| Output noise suppression | Device complies with EN 55011 (class B) |
| Efficiency | >88% (at 230 VAC and nominal values) |
| MTBF | >500,000 h, per IEC 61709 (SN 29500) |
| Rated load | Max. 13.2 W |
| No-load operation | Max. 0.7 W |
| Maximum | 6000 m |
| Ventilation/Cooling | Normal convection, no fan required |
| Degree of protection per EN 60529 | IP20 |
| Protection class | II |
| Operation | 30 g in each direction, per IEC 60068-2-27 |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Pollution degree | 2, per EN 50178 |
| Climate category | 3K3, per EN 60721 |
| Installation | Easy top-hat rail installation (DIN rail NS 35, EN 60715) or wall mounting |
| Width | 90 mm |
| Height | 90 mm |
| Depth | 61 mm |
| Weight | 400 g |
Altri componenti B&R
UsatoB&R 5C5001.01 IPC 5000 5D5500.06 Used
UsatoB&R 5PC720.1505-K07 - 5P62:0A-03 Used