Wago 零部件

Jumper; for M6 stud bolts; 3-way; unplated; silver-colored

Strain relief housing; for female and male connectors; 2 parts; Pin spacing 3.5 mm; 11-pole; light gray

Basic relay; Nominal input voltage: 48 VDC; 1 changeover contact; Limiting continuous current: 16 A; Module width: 13 mm; Module height: 15 mm

WMB marking card; as card; MARKED; R, S, T, U, V, W, X, Y, Z, Mp (10x); stretchable 5 - 5.2 mm; Horizontal marking; snap-on type; white

Gripping plate with sliding connector release; for female and male connectors; 2 parts; Pin spacing 3.5 mm; light gray

L-type end module; modular; with rigid contact pin; End module; 2,50 mm²; gray

WSB marking card; as card; MARKED; 21 / 22 (50 each); not stretchable; Horizontal marking; snap-on type; white

End plate; with flange; gray

Carrier rail adapter made of zinc die-cast; horizontal mounting of 787-16xx (TS35)

Mounting carrier with strain relief; for 10-wire connectors; 221 Series - 4 mm²; with snap-in mounting foot; dark gray-yellow

Mounting carrier with strain relief; for 10-wire connectors; 221 Series - 4 mm²; with snap-in mounting foot; blue

Marking strips; for Smart Printer; cut to a defined length; MARKED; not stretchable; snap-on type; white

Mounting carrier; for 10-wire connectors; 221 Series - 4 mm²; for side screw mounting; white

Marker card; Plastic; red

WMB marking card; as card; MARKED; A, B, P, N, PE, PEN, L1, L2, L3, Ground (10x); Horizontal marking; snap-on type; white

WMB marking card; as card; MARKED; 13 / 14 (50 each); not stretchable; Horizontal marking; snap-on type; white

Snap-in frame; for male connectors; 1 part; Pin spacing 7.62 mm; 2-pole; light gray

End plate; snap-fit type; 1 mm thick; dark gray

Marking strips; for laser printer; white

Basic relay; Nominal input voltage: 115 VAC; 1 changeover contact; Limiting continuous current: 16 A; with gold contacts; Module width: 13 mm; Module height: 15 mm

Separator plate; 2 mm thick; oversized; orange

WMB marking card; as card; MARKED; 1 ... 9 (10x); not stretchable; Vertical marking; snap-on type; white

Mounting carrier with strain relief; for 10-wire connectors; 221 Series - 4 mm²; for DIN-15 rail; dark gray-yellow

WMB marking card; as card; MARKED; 60, 70 ... 100 (20 each); stretchable 5 - 5.2 mm; Horizontal marking; snap-on type; white