Wago 零部件

2-pin component carrier block; LED (red); 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; gray

2-pin component carrier block; LED (red); 24 VDC; for DIN-rail 35 x 15 and 35 x 7.5; gray

2-pin carrier terminal block; with shield contact; for DIN-rail 35 x 15 and 35 x 7.5; gray

1-conductor/1-conductor terminal block for pluggable modules; 6-pole; with 2-conductor terminal blocks; with 2 jumper positions; with orange separator plate; for DIN-rail 35 x 15 and 35 x 7.5

1-conductor/1-pin terminal block for pluggable modules; 6-pole; with 2 jumper positions; with orange separator plate; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP®; 4,00 mm²; gray

8-channel digital output; 24 VDC; 0.5 A; 8 x M8

8-channel digital input; 24 VDC; 4 x M12, two outputs per connector

4-pin carrier terminal block; for DIN-rail 35 x 15 and 35 x 7.5; black

Controller PFC200; 2 x ETHERNET, RS-232/-485, Mobile Radio Module; Telecontrol technology; Ext. Temperature

THT male header; 1.0 x 1.0 mm solder pin; straight; Preceding ground contact; Pin spacing 5 mm; 5-pole; green-yellow, gray

1-conductor/1-pin double deck receptacle terminal block; Through/through terminal block; 2.5 mm²; L/N; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; gray

Controller ETHERNET; 3rd Generation; SD Card Slot; Ext. Temperature

1-conductor female connector; CAGE CLAMP®; 4 mm²; Pin spacing 5 mm; 2-pole; coding finger; 4,00 mm²; green-yellow/gray

Controller ETHERNET; 3rd Generation

Controller ETHERNET; 3rd Generation; SD Card Slot; Telecontrol technology; Ext. Temperature

Controller PFC200; 2 x ETHERNET, RS-232/-485, CAN, CANopen, PROFIBUS Slave; Telecontrol technology; Ext. Temperature

Controller PFC200; 2 x ETHERNET, RS-232/-485

Fail-safe 4/2 channel digital input/output; 24 VDC; 10 A; PROFIsafe V2.0 iPar

Serial TTY Interface; 9600 baud; Even; 8/1 bits

Serial TTY Interface; 9600 baud; None; 8/1 bits

Controller PFC200; 2 x ETHERNET, RS-232/-485, Mobile Radio Module

Relay module; Nominal input voltage: 115 VAC; 1 changeover contact; with gold contacts; Red status indicator; Module width: 6 mm; 2,50 mm²; gray

1-conductor female connector; CAGE CLAMP®; 4 mm²; Pin spacing 5 mm; 8-pole; coding finger; 4,00 mm²; green-yellow/blue/gray

2-pin component carrier block; with diode 1N4007; anode, right side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; gray