B&R X20DO2649 NEW

21 people are viewing this right now

Hurry Up! Only 5 left in stock!

In stock
X20DO2649 NEW
B&RShopX20 systems

Guarantee Safe Checkout

SKU : X20DO2649
Brand : B&R
Material number:
  • 2 digital outputs
  • Relay module for 240 VAC / 30 VDC
  • 2 change over contacts
  • Single-channel isolated outputs

The module has 2 relay outputs.

State: New
Specification :
Short description
I/O module 2 digital outputs 30 VDC / 240 VAC, outputs single-channel isolated
General information
B&R ID code 0x20DA
Status indicators I/O function per channel, operating state, module status
Module run/error Yes, using LED status indicator and software
Outputs Yes, using LED status indicator
Power consumption
Bus 0.45 W
Internal I/O -
Additional power dissipation caused by actuators (resistive) [W] +2.5
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
DNV Temperature: B (0 to 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
KR Yes
Temperature: 5 - 55°C
Vibration: 4 g
EMC: Bridge and open deck
KC Yes
Digital outputs
Variant Relay / Changeover contact
Channels are single-channel isolated.
Nominal voltage 30 VDC / 240 VAC
Max. voltage 264 VAC
Switching voltage Max. 110 VDC / 264 VAC
Rated frequency DC / 45 to 63 Hz
Nominal output current 5 A at 30 VDC / 5 A at 240 VAC
Total nominal current 10 A at 30 VDC / 10 A at 240 VAC
Actuator power supply External
Inrush current Max. 6 A (per channel)
Contact resistance 50 mΩ
Switching delay
0 → 1 ≤10 ms
1 → 0 ≤10 ms
Insulation voltages
Channel - Bus Tested at 4000 VAC
Channel - Channel Tested at 1000 VAC
Service life
Electrical Min. 60 x 10³ ops. (NC) at 6 A
Min. 30 x 30³ ops. (NO) at 6 A
Mechanical Min. 10 x 106 ops.
Switching capacity
Minimum 10 mA / 5 VDC
Maximum 180 W / 1500 VA
Protective circuit
Internal None
AC RC combination or VDR
DC Inverse diode, RC combination or VDR
Electrical properties
Electrical isolation Channel isolated from channel, bus and I/O power supply
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Not permitted
Degree of protection per EN 60529 IP20
Ambient conditions
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x bus module X20BM11 separately.
Pitch 12.5+0.2 mm
Write Your Own Review
You're reviewing:B&R X20DO2649 NEW

Get in Touch

We would love to hear from you about our entire service. Your comments and suggestions will be highly appreciated. Please complete the form below.


We spend time and help you finding absolute, new, used and refurbished products around the world. Need help please contact one of our team members using our Chat, E-mail or phonenumbers

- [email protected]

- + 31 (0) 50 - 7110348 

- Use our chat in the lower right corner on our screen.

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.

B&R X20DO2649 NEW