Temperature signal conditioner for RTD sensors; Current output signal; Power via output; 6 mm module width
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Signal Conditioners and Isolation Amplifiers |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
857-815은(는) 언제 배송될 수 있나요?
857-815은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
857-815을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — 857-815에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 857-815에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
<p><b>Short description:</b></p><p>WAGO's loop-powered RTD temperature signal conditioner records sensors (Pt100, Pt200, Pt500, Pt1000) and resistors up to 4.5 kΩ, converting the temperature signal into a standard analog signal at the output.</p><p>The loop-powered RTD temperature signal conditioner provides safe isolation between input and output with 3 kV test voltage per EN 61010-1.</p><p><b>Features:</b></p><ul><li>No additional supply voltage required</li><li>For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm</li><li>2-, 3- and 4-wire connection technology</li><li>Calibrated measurement range switching</li><li>Detects a sensor wire break/short circuit</li></ul>
사양
Notes
| Safety Information | The signal conditioner must only be configured with the DIP switch in the de-energized state. |
| Note | Use shielded signal cables!Only use shielded signal cables for analog input and output signals.This ensures the device maintains its specified accuracy and immunity to interference, even when external disturbances affect the signal cable. |
Technical data - Configuration
| Configuration options | DIP switch |
Technical data - Input
| Input signal type | Resistance, Pt sensors, Resistor |
Technical data - Input (RTD sensors)
| Sensor types (RTD) | Pt100, Pt200, Pt500, Pt1000 |
| Sensor connection | 2-wire; 3-wire; 4-wire (switchable) |
| Sensor power supply (RTD) max. | ≤ 0.5 mA |
| Temperature measurement range (RTD) | −200 … +850 °C |
| Measurement span (RTD) min. | 50 K |
Technical data - Input (resistors)
| Input range (resistor) | 0 … 1 kΩ; 0 … 4.5 kΩ |
Technical data - Output (analog)
| Output signal type | Current |
| Output signal (current) | 4 … 20 mA, 20 … 4 mA |
| Load impedance (current output) | See derating graphic |
Technical data - Signal processing
| Step response (typ.) | 1000 ms |
Technical data - Measurement error
| Transmission error (typ.) | ≤ 0.1 % at full measurement span |
| Transmission error for the set measurement range | ≤ ((40 K/set measurement range [K]) + 0.1) % |
| Transmission error (under interference) | ≤ 5 % |
| Temperature coefficient | ≤ 0.02 %/K |
Technical data - Power supply
| Power supply type | Loop-powered (via output) |
| Supply voltage | 8 … 30 VDC (Power is derived from the output circuit.) |
| Power loss (max.) P<sub>l (max.)</sub> | 0.7 W |
Safety and protection
| Rated voltage | 300 V; 150 V (UL) |
| Measurement category per EN/UL 61010-2-030 | CAT II (input) |
| Protection type | IP20 |
Safety and protection - Test voltage
| Test voltage (input/analog output) | 3 kVAC; 50 … 60 Hz; 1 min |
Safety and protection - Insulation coordination (UL)
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output) | Reinforced insulation (safe isolation) |
Safety and protection - Insulation coordination
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output/supply) | Reinforced insulation (safe isolation) |
Connection data
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
| Width | 6 mm / 0.236 inches |
| Height | 94 mm / 3.701 inches |
| Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inches |
Mechanical data
| Mounting type | DIN-35 rail |
Material data
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.013 MJ |
| Weight | 38.9 g |
Environmental requirements
| Ambient temperature (operation) | -25 … +70 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Temperature range of connection cable | ≥ (Tambient + 10 K) |
| Temperature range of the connection cable (UL) | 75 °C |
| Relative humidity | 5 … 95 % (no condensation permissible) |
| Operating altitude (max.) | 2000 m |
Standards and specifications
| Conformity marking | CE |
| EMC immunity to interference | EN 61000-6-2; EN 61326-1; EN 50121-3-2 |
| EMC emission of interference | EN 61000-6-3; EN 61326-1; EN 50121-3-2 |
| Standards/specifications | EN 61010-1, EN 61373 |
Commercial data
| PU (SPU) | 1 pcs |
| Packaging type | bag |
| Country of origin | DE |
| GTIN | 4055143475648 |
| Customs tariff number | 85437090300 |
Product Classification
| UNSPSC | 41111970 |
| eCl@ss 10.0 | 27-21-01-29 |
| eCl@ss 9.0 | 27-21-01-29 |
| ETIM 9.0 | EC002919 |
| ETIM 10.0 | EC002919 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 1303-86-2, 1317-36-8, 7439-92-1, 75980-60-8, 79-94-7 |
| REACH Candidate List Substance | 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, Diboron trioxide, Lead, Lead monoxide, Phosphine oxide, diphenyl(2,4,6-trimethylbenzoyl)- |
| RoHS Compliance Status | Compliant,No Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 830a7e26-28ea-4705-ab6e-226f9c633520 |
| SCIP notification number (Belgium) | 63788937-7a1f-4563-936a-f01960202294 |
| SCIP notification number (Bulgaria) | 7573483d-d923-4363-9064-ce0784b75504 |
| SCIP notification number (Czech Republic) | 17fdd5aa-0c9d-4035-8fac-fb4e34ddac7f |
| SCIP notification number (Denmark) | f6a88738-2c30-4e26-8f7e-78d92a8961e5 |
| SCIP notification number (Finland) | b4ce184e-8252-4b06-b805-6aa2c771805f |
| SCIP notification number (France) | 7d65f4e8-4b0d-4e4d-922c-5b4b37ec9f15 |
| SCIP notification number (Germany) | 7eda7375-97a9-4708-8499-ee382843832f |
| SCIP notification number (Hungary) | eef5d1bb-60c8-4a7b-815f-42f57a0b5106 |
| SCIP notification number (Italy) | 9d811551-d172-4095-9c09-acc10881822b |
| SCIP notification number (Netherlands) | 5b4bce60-08c5-43bc-b361-c0de92c2e4da |
| SCIP notification number (Poland) | 05d900c2-b348-49b3-9862-d1595b7b0a8f |
| SCIP notification number (Romania) | 5914960a-62a8-45a9-95fc-a9ee80aab951 |
| SCIP notification number (Sweden) | d4592a7f-9ffa-4c4d-9de5-be795739849b |












