Disponível sob consulta
Temperature signal conditioner for RTD sensors; Current output signal; Power via output; 6 mm module width
Referência: 857-815 · Marca: Wago
Preço sob consulta
Solicitar orçamento
Garantia de 12 meses (novo) · 3 meses (usado/recondicionado)
Devoluções em 30 dias, sem taxa de reposição em peças não usadas
Envio via
Dados rápidos
| Disponibilidade | Confirmação sob consulta |
| Categoria | Signal Conditioners and Isolation Amplifiers |
| Ciclo de vida | active |
| Garantia | 12 meses (novo) · 3 meses (usado/recondicionado) |
Envio e disponibilidade
Quando é que 857-815 pode ser enviado?
857-815 é obtido sob encomenda — solicite um orçamento e confirmaremos a disponibilidade exata e o prazo de entrega para esta unidade específica.
Posso levantar 857-815 pessoalmente?
O levantamento no nosso armazém em Groningen, Países Baixos, pode ser possível — contacte-nos antes de encomendar para confirmar disponibilidade e combinar um horário de levantamento.
A entrega expresso está disponível?
Sim — mencione isso ao solicitar um orçamento para 857-815 e incluiremos as opções de entrega expresso na nossa resposta.
A nossa fábrica está parada e precisamos disto com urgência — podem ajudar?
Em caso de avaria crítica, contacte-nos diretamente através do +31 (0)50-7110348 ou sales@partnerplc.com — estudaremos um estafeta no mesmo dia ou transporte dedicado para 857-815, consoante a disponibilidade e o destino.
<p><b>Short description:</b></p><p>WAGO's loop-powered RTD temperature signal conditioner records sensors (Pt100, Pt200, Pt500, Pt1000) and resistors up to 4.5 kΩ, converting the temperature signal into a standard analog signal at the output.</p><p>The loop-powered RTD temperature signal conditioner provides safe isolation between input and output with 3 kV test voltage per EN 61010-1.</p><p><b>Features:</b></p><ul><li>No additional supply voltage required</li><li>For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm</li><li>2-, 3- and 4-wire connection technology</li><li>Calibrated measurement range switching</li><li>Detects a sensor wire break/short circuit</li></ul>
Especificações
Notes
| Safety Information | The signal conditioner must only be configured with the DIP switch in the de-energized state. |
| Note | Use shielded signal cables!Only use shielded signal cables for analog input and output signals.This ensures the device maintains its specified accuracy and immunity to interference, even when external disturbances affect the signal cable. |
Technical data - Configuration
| Configuration options | DIP switch |
Technical data - Input
| Input signal type | Resistance, Pt sensors, Resistor |
Technical data - Input (RTD sensors)
| Sensor types (RTD) | Pt100, Pt200, Pt500, Pt1000 |
| Sensor connection | 2-wire; 3-wire; 4-wire (switchable) |
| Sensor power supply (RTD) max. | ≤ 0.5 mA |
| Temperature measurement range (RTD) | −200 … +850 °C |
| Measurement span (RTD) min. | 50 K |
Technical data - Input (resistors)
| Input range (resistor) | 0 … 1 kΩ; 0 … 4.5 kΩ |
Technical data - Output (analog)
| Output signal type | Current |
| Output signal (current) | 4 … 20 mA, 20 … 4 mA |
| Load impedance (current output) | See derating graphic |
Technical data - Signal processing
| Step response (typ.) | 1000 ms |
Technical data - Measurement error
| Transmission error (typ.) | ≤ 0.1 % at full measurement span |
| Transmission error for the set measurement range | ≤ ((40 K/set measurement range [K]) + 0.1) % |
| Transmission error (under interference) | ≤ 5 % |
| Temperature coefficient | ≤ 0.02 %/K |
Technical data - Power supply
| Power supply type | Loop-powered (via output) |
| Supply voltage | 8 … 30 VDC (Power is derived from the output circuit.) |
| Power loss (max.) P<sub>l (max.)</sub> | 0.7 W |
Safety and protection
| Rated voltage | 300 V; 150 V (UL) |
| Measurement category per EN/UL 61010-2-030 | CAT II (input) |
| Protection type | IP20 |
Safety and protection - Test voltage
| Test voltage (input/analog output) | 3 kVAC; 50 … 60 Hz; 1 min |
Safety and protection - Insulation coordination (UL)
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output) | Reinforced insulation (safe isolation) |
Safety and protection - Insulation coordination
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output/supply) | Reinforced insulation (safe isolation) |
Connection data
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
| Width | 6 mm / 0.236 inches |
| Height | 94 mm / 3.701 inches |
| Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inches |
Mechanical data
| Mounting type | DIN-35 rail |
Material data
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.013 MJ |
| Weight | 38.9 g |
Environmental requirements
| Ambient temperature (operation) | -25 … +70 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Temperature range of connection cable | ≥ (Tambient + 10 K) |
| Temperature range of the connection cable (UL) | 75 °C |
| Relative humidity | 5 … 95 % (no condensation permissible) |
| Operating altitude (max.) | 2000 m |
Standards and specifications
| Conformity marking | CE |
| EMC immunity to interference | EN 61000-6-2; EN 61326-1; EN 50121-3-2 |
| EMC emission of interference | EN 61000-6-3; EN 61326-1; EN 50121-3-2 |
| Standards/specifications | EN 61010-1, EN 61373 |
Commercial data
| PU (SPU) | 1 pcs |
| Packaging type | bag |
| Country of origin | DE |
| GTIN | 4055143475648 |
| Customs tariff number | 85437090300 |
Product Classification
| UNSPSC | 41111970 |
| eCl@ss 10.0 | 27-21-01-29 |
| eCl@ss 9.0 | 27-21-01-29 |
| ETIM 9.0 | EC002919 |
| ETIM 10.0 | EC002919 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 1303-86-2, 1317-36-8, 7439-92-1, 75980-60-8, 79-94-7 |
| REACH Candidate List Substance | 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, Diboron trioxide, Lead, Lead monoxide, Phosphine oxide, diphenyl(2,4,6-trimethylbenzoyl)- |
| RoHS Compliance Status | Compliant,No Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 830a7e26-28ea-4705-ab6e-226f9c633520 |
| SCIP notification number (Belgium) | 63788937-7a1f-4563-936a-f01960202294 |
| SCIP notification number (Bulgaria) | 7573483d-d923-4363-9064-ce0784b75504 |
| SCIP notification number (Czech Republic) | 17fdd5aa-0c9d-4035-8fac-fb4e34ddac7f |
| SCIP notification number (Denmark) | f6a88738-2c30-4e26-8f7e-78d92a8961e5 |
| SCIP notification number (Finland) | b4ce184e-8252-4b06-b805-6aa2c771805f |
| SCIP notification number (France) | 7d65f4e8-4b0d-4e4d-922c-5b4b37ec9f15 |
| SCIP notification number (Germany) | 7eda7375-97a9-4708-8499-ee382843832f |
| SCIP notification number (Hungary) | eef5d1bb-60c8-4a7b-815f-42f57a0b5106 |
| SCIP notification number (Italy) | 9d811551-d172-4095-9c09-acc10881822b |
| SCIP notification number (Netherlands) | 5b4bce60-08c5-43bc-b361-c0de92c2e4da |
| SCIP notification number (Poland) | 05d900c2-b348-49b3-9862-d1595b7b0a8f |
| SCIP notification number (Romania) | 5914960a-62a8-45a9-95fc-a9ee80aab951 |
| SCIP notification number (Sweden) | d4592a7f-9ffa-4c4d-9de5-be795739849b |
12 meses de garantiaem todos os artigos novos
3 meses de garantiaem peças usadas e recondicionadas
Devoluções em 30 diassem taxa de reposição em peças não usadas
Envio mundialEntrega rápida e rastreável em todo o mundo
