홈 / IFM / IFM SB4232

요청 시 제공 가능

IFM SB4232

Name: IFM SB4232
Brand: IFM
SKU: SB4232

제조사 부품번호: SB4232 · 브랜드: IFM

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Mechatronic sensors
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

SB4232은(는) 언제 배송될 수 있나요?

SB4232은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

SB4232을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — SB4232에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 SB4232에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

Fast flow or temperature changes do not affect the measurement High measurement dynamics reduces type versions No inlet and output pipe lengths required Specifically adjusted to oil for optimum measurement results Convenient operation via buttons or parameter setting via IO-Link

사양

Product characteristics

Measuring range	0.3...15 l/min; 0.018...0.9 m³/h; 4.8...237.8 gph; 0.08...3.965 gpm
0.3...15 l/min	0.018...0.9 m³/h
Process connection	threaded connection G 3/4 internal thread

Application

Special feature	Gold-plated contacts
Media	Liquids; oil (viscosity 100 mm²/s at 40° C)
Medium temperature[°C] [°C]	-10...100
Pressure rating	100 bar; 10 MPa
100 bar	10 MPa
Note on pressure rating	at medium temperature >70°C: 80 bar / 8 MPa

Electrical data

Operating voltage[V] [V]	18...30 DC; (to SELV/PELV)
Current consumption[mA] [mA]	< 50
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s] [s]	< 3

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; frequency signal; IO-Link
Max. voltage drop switching output DC[V] [V]	2
Max. current load per output[mA] [mA]	150; (200: ...60 °C; Ambient temperature; 250: ...40 °C; Ambient temperature)
Analogue current output[mA] [mA]	4...20
Max. load[Ω] [Ω]	500
Short-circuit protection	yes
Overload protection	yes
Frequency of the output[Hz] [Hz]	0...10000

Measuring/setting range

Measuring range	-10...100 °C; 14...212 °F
0.3...15 l/min	0.018...0.9 m³/h
Display range	-32...122 °C; -25.6...251.6 °F
0...18 l/min	0...1.08 m³/h
Resolution	0.1 °C; 0.1 °F
0.01 l/min	0.001 m³/h
Set point SP	-9.3...100 °C; 15.2...212 °F
0.1...15 l/min	0.006...0.9 m³/h
Reset point rP	-10...99.3 °C; 14...210.8 °F
0...14.9 l/min	0...0.894 m³/h
Frequency end point, FEP	12...100 °C; 53.6...212 °F
1...15 l/min	0.06...0.9 m³/h
In steps of	0.1 °C; 0.2 °F
Frequency at the end point FRP[Hz] [Hz]	10...10000
In steps of[Hz] [Hz]	10
Measuring dynamics	1:50
-10...100 °C	14...212 °F
-32...122 °C	-25.6...251.6 °F
0.1 °C	0.2 °F
-9.3...100 °C	15.2...212 °F
-10...99.3 °C	14...210.8 °F
Frequency start point, FSP	-10...78 °C; 14...172.4 °F
-10...78 °C	14...172.4 °F
12...100 °C	53.6...212 °F

Accuracy / deviations

Accuracy (in the measuring range)	± 5 % MEW; (Q > 1 l/min; 20...70 °C Medium temperature)
Repeatability	± 1 % MEW
Temperature drift	0,029 °C / K
Accuracy[K] [K]	3 K (25°C; Q > 1 l/min)

Response times

Response time[s] [s]	0.01
Damping process value dAP[s] [s]	0...5
In steps of[s] [s]	0.1
Damping for the analogue output dAA[s] [s]	0...5
Dynamic response T05 / T09[s] [s]	T09 = 120 (Q > 1 l/min)

Software / programming

Parameter setting options

hysteresis / window; normally open / normally closed; switching logic; current/frequency output; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour; calibration factor

Interfaces

Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9 CDV
Profiles	Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis
Smart Sensor - SSP 0	Generic Profiled Sensor
Function	Device diagnosis
SIO mode	yes
Required master port type	A
Process data analogue	2
Process data binary	2
Min. process cycle time[ms] [ms]	3.2
Supported DeviceIDs	default; 1043
default	1043

Operating conditions

Ambient temperature[°C] [°C]	0...60
Note on ambient temperature	medium temperature < 80 °C; medium temperature < 100 °C: 0...40 °C
Storage temperature[°C] [°C]	-15...80
Protection	IP 65; IP 67

Tests / approvals

EMC	DIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistance	DIN EN 60068-2-27; 20 g (11 ms)
DIN EN 60068-2-27	20 g (11 ms)
Vibration resistance	DIN EN 60068-2-6; 5 g (10...2000 Hz)
DIN EN 60068-2-6	5 g (10...2000 Hz)
UL approval	UL approval no.; I005; File number UL; E174189
UL approval no.	I005
File number UL	E174189
Pressure Equipment Directive	Sound engineering practice

Mechanical data

Weight[g] [g]	937.1
Materials	stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated
Materials (wetted parts)	stainless steel (316 / 1.4401); stainless steel (316L/1.4404); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM
Process connection	threaded connection G 3/4 internal thread
Switching cycles mechanical	10 million

Displays / operating elements

Display	Display unit; 6 x LED, green; switching status; 2 x LED, yellow; measured values; alphanumeric display, red/green alternating indication 4-digit; programming; alphanumeric display, 4-digit
Display unit	6 x LED, green
switching status	2 x LED, yellow
measured values	alphanumeric display, red/green alternating indication 4-digit
programming	alphanumeric display, 4-digit

Remarks

Remarks	Recommendation: use a 200-micron filter.; All data refer to oil with the following nominal viscosity: 100 mm²/s, 40 °C; MW = measured value; MEW = Final value of the measuring range
Pack quantity	1 pcs.