Disponibile su richiesta
IFM SB4232
Codice: SB4232 · Marchio: IFM
Prezzo su richiesta
Richiedi un preventivo
Garanzia di 12 mesi (nuovo) · 3 mesi (usato/rigenerato)
Reso entro 30 giorni, nessuna commissione di riassortimento sui pezzi non utilizzati
Spedito tramite
In breve
| Disponibilità | Conferma su richiesta |
| Categoria | Mechatronic sensors |
| Garanzia | 12 mesi (nuovo) · 3 mesi (usato/rigenerato) |
Spedizione e disponibilità
Quando può essere spedito SB4232?
SB4232 viene reperito su richiesta — richiedi un preventivo e ti confermeremo disponibilità e tempi di consegna esatti per questa unità specifica.
Posso ritirare SB4232 di persona?
Il ritiro presso il nostro magazzino di Groningen, Paesi Bassi, potrebbe essere possibile — contattaci prima dell'ordine per verificare disponibilità e concordare un orario di ritiro.
È disponibile la consegna espressa?
Sì — menzionalo nella richiesta di preventivo per SB4232 e includeremo le opzioni di spedizione espressa nella nostra risposta.
Il nostro impianto è fermo e ci serve con urgenza: potete aiutarci?
In caso di guasto critico, contattaci direttamente al +31 (0)50-7110348 o a sales@partnerplc.com — valuteremo un corriere in giornata o una consegna dedicata per SB4232, in base a disponibilità e destinazione.
Fast flow or temperature changes do not affect the measurement High measurement dynamics reduces type versions No inlet and output pipe lengths required Specifically adjusted to oil for optimum measurement results Convenient operation via buttons or parameter setting via IO-Link
Specifiche
Product characteristics
| Measuring range | 0.3...15 l/min; 0.018...0.9 m³/h; 4.8...237.8 gph; 0.08...3.965 gpm |
| 0.3...15 l/min | 0.018...0.9 m³/h |
| Process connection | threaded connection G 3/4 internal thread |
Application
| Special feature | Gold-plated contacts |
| Media | Liquids; oil (viscosity 100 mm²/s at 40° C) |
| Medium temperature[°C] [°C] | -10...100 |
| Pressure rating | 100 bar; 10 MPa |
| 100 bar | 10 MPa |
| Note on pressure rating | at medium temperature >70°C: 80 bar / 8 MPa |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 3 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; frequency signal; IO-Link |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Max. current load per output[mA] [mA] | 150; (200: ...60 °C; Ambient temperature; 250: ...40 °C; Ambient temperature) |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Frequency of the output[Hz] [Hz] | 0...10000 |
Measuring/setting range
| Measuring range | -10...100 °C; 14...212 °F |
| 0.3...15 l/min | 0.018...0.9 m³/h |
| Display range | -32...122 °C; -25.6...251.6 °F |
| 0...18 l/min | 0...1.08 m³/h |
| Resolution | 0.1 °C; 0.1 °F |
| 0.01 l/min | 0.001 m³/h |
| Set point SP | -9.3...100 °C; 15.2...212 °F |
| 0.1...15 l/min | 0.006...0.9 m³/h |
| Reset point rP | -10...99.3 °C; 14...210.8 °F |
| 0...14.9 l/min | 0...0.894 m³/h |
| Frequency end point, FEP | 12...100 °C; 53.6...212 °F |
| 1...15 l/min | 0.06...0.9 m³/h |
| In steps of | 0.1 °C; 0.2 °F |
| Frequency at the end point FRP[Hz] [Hz] | 10...10000 |
| In steps of[Hz] [Hz] | 10 |
| Measuring dynamics | 1:50 |
| -10...100 °C | 14...212 °F |
| -32...122 °C | -25.6...251.6 °F |
| 0.1 °C | 0.2 °F |
| -9.3...100 °C | 15.2...212 °F |
| -10...99.3 °C | 14...210.8 °F |
| Frequency start point, FSP | -10...78 °C; 14...172.4 °F |
| -10...78 °C | 14...172.4 °F |
| 12...100 °C | 53.6...212 °F |
Accuracy / deviations
| Accuracy (in the measuring range) | ± 5 % MEW; (Q > 1 l/min; 20...70 °C Medium temperature) |
| Repeatability | ± 1 % MEW |
| Temperature drift | 0,029 °C / K |
| Accuracy[K] [K] | 3 K (25°C; Q > 1 l/min) |
Response times
| Response time[s] [s] | 0.01 |
| Damping process value dAP[s] [s] | 0...5 |
| In steps of[s] [s] | 0.1 |
| Damping for the analogue output dAA[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | T09 = 120 (Q > 1 l/min) |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/frequency output; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour; calibration factor |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 2 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 3.2 |
| Supported DeviceIDs | default; 1043 |
| default | 1043 |
Operating conditions
| Ambient temperature[°C] [°C] | 0...60 |
| Note on ambient temperature | medium temperature < 80 °C; medium temperature < 100 °C: 0...40 °C |
| Storage temperature[°C] [°C] | -15...80 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27; 20 g (11 ms) |
| DIN EN 60068-2-27 | 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 5 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 5 g (10...2000 Hz) |
| UL approval | UL approval no.; I005; File number UL; E174189 |
| UL approval no. | I005 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice |
Mechanical data
| Weight[g] [g] | 937.1 |
| Materials | stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated |
| Materials (wetted parts) | stainless steel (316 / 1.4401); stainless steel (316L/1.4404); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM |
| Process connection | threaded connection G 3/4 internal thread |
| Switching cycles mechanical | 10 million |
Displays / operating elements
| Display | Display unit; 6 x LED, green; switching status; 2 x LED, yellow; measured values; alphanumeric display, red/green alternating indication 4-digit; programming; alphanumeric display, 4-digit |
| Display unit | 6 x LED, green |
| switching status | 2 x LED, yellow |
| measured values | alphanumeric display, red/green alternating indication 4-digit |
| programming | alphanumeric display, 4-digit |
Remarks
| Remarks | Recommendation: use a 200-micron filter.; All data refer to oil with the following nominal viscosity: 100 mm²/s, 40 °C; MW = measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
Garanzia di 12 mesisu tutti i prodotti nuovi
Garanzia di 3 mesisu pezzi usati e rigenerati
Reso entro 30 giorninessuna commissione di riassortimento sui pezzi non utilizzati
Spedizione globaleConsegna rapida e tracciata in tutto il mondo
