IFM PP7554

Name: IFM PP7554
Brand: IFM
SKU: PP7554

제조사 부품번호: PP7554 · 브랜드: IFM

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Two switching outputs
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

PP7554은(는) 언제 배송될 수 있나요?

PP7554은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

PP7554을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — PP7554에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 PP7554에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

Robust design for use in harsh industrial environments Two switching outputs, one of which can be configured as diagnostic output High shock and vibration resistance Lifespan of more than 100 million pressure cycles User-friendly communication and parameterisation via IO-Link

사양

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2
Measuring range	-1...10 bar; -14.5...145 psi; -100...1000 kPa; -0.1...1 MPa
-1...10 bar	-14.5...145 psi
Process connection	threaded connection G 1/4 external thread internal thread:M5

Application

Application	for industrial applications
Media	liquids and gases
Medium temperature[°C] [°C]	-25...90
Min. burst pressure	150 bar; 2175 psi; 15 MPa
150 bar	2175 psi
Pressure rating	75 bar; 1087 psi; 7.5 MPa
75 bar	1087 psi
Type of pressure	relative pressure; vacuum

Electrical data

Operating voltage[V] [V]	9.6...36 DC; (communication mode: 18...32)
Current consumption[mA] [mA]	< 45
Min. insulation resistance[MΩ] [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s] [s]	0.3

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 2

Outputs

Total number of outputs	2
Output signal	switching signal; IO-Link; (configurable)
Electrical design	PNP
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V] [V]	2
Permanent current rating of switching output DC[mA] [mA]	250
Switching frequency DC[Hz] [Hz]	170
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range	-1...10 bar; -14.5...145 psi; -100...1000 kPa; -0.1...1 MPa
-1...10 bar	-14.5...145 psi
Set point SP	-0.9...10 bar; -13...145 psi; -0.09...1 MPa
-0.9...10 bar	-13...145 psi
Reset point rP	-0.95...9.95 bar; -14...144 psi; -0.095...0.995 MPa
-0.95...9.95 bar	-14...144 psi
In steps of	0.05 bar; 1 psi; 0.005 MPa
0.05 bar	1 psi
Factory setting	SP1 = 2.50 bar; rP1 = 2.30 bar; SP2 = 7.50 bar; rP2 = 7.30 bar; OUT1 = Hno; OUT2 = Hno

Accuracy / deviations

Switch point accuracy[% of the span] [% of the span]	< ± 0,5
Repeatability[% of the span] [% of the span]	< ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation[% of the span] [% of the span]	< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting)
Zero-point stabilisation[% of the span] [% of the span]	IO-Link; 1,0; (see operating instructions zero-point behaviour)
switching output	1,0
IO-Link	1,0; (see operating instructions zero-point behaviour)
Hysteresis deviation[% of the span] [% of the span]	< ± 0,1
Long-term stability[% of the span] [% of the span]	< ± 0,1; (per year)
Temperature coefficient zero point[% of the span / 10 K] [% of the span / 10 K]	< ± 0,2; (0...80 °C)
Temperature coefficient span[% of the span / 10 K] [% of the span / 10 K]	< ± 0,2; (0...80 °C)

Response times

Response time[ms] [ms]	< 3
Damping process value dAP in steps[s] [s]	0,003 - 0,006 - 0,010 - 0,017 - 0,060 - 0,125 - 0,250 - 0,500

Interfaces

Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.0
SIO mode	yes
Required master port type	A
Process data analogue	1
Process data binary	2
Min. process cycle time[ms] [ms]	2.3
Supported DeviceIDs	default; 6
default	6

Operating conditions

Ambient temperature[°C] [°C]	-25...85
Storage temperature[°C] [°C]	-40...100
Protection	IP 68; (7 days / 1 m water depth / 0.1 bar)

Tests / approvals

EMC	immunity; EN 61000-6-2; EN 61000-4-2 ESD; 4 kV contact discharge / 15 kV air discharge; EN 61000-4-3 HF radiated; 20 V/m; EN 61000-4-4 Burst; 4 kV coupling clamp; EN 61000-4-5 Surge; 0,5 kV supply / 1 kV signal for DC units; EN 61000-4-6 HF conducted; 10 V; immunity; according to the automotive directive 1995/54/EC / 04/104EG / 05/83/EG; absorber chamber test to ISO 11452-2:; 80 V/m
immunity	according to the automotive directive 1995/54/EC / 04/104EG / 05/83/EG
EN 61000-4-2 ESD	4 kV contact discharge / 15 kV air discharge
EN 61000-4-3 HF radiated	20 V/m
EN 61000-4-4 Burst	4 kV coupling clamp
EN 61000-4-5 Surge	0,5 kV supply / 1 kV signal for DC units
EN 61000-4-6 HF conducted	10 V
absorber chamber test to ISO 11452-2:	80 V/m
Shock resistance	DIN IEC 60068-2-27 / DIN IEC 60068-2-29; 1000 g; DIN EN 61373; category 3
DIN IEC 60068-2-27 / DIN IEC 60068-2-29	1000 g
DIN EN 61373	category 2
Vibration resistance	DIN IEC 68-2-6; 20 g (10...2000 Hz); DIN EN 60068-2-64; 14 g; DIN EN 61373; category 2
DIN IEC 68-2-6	20 g (10...2000 Hz)
DIN EN 60068-2-64	14 g
MTTF[years] [years]	310
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Railway applications	DIN EN 50155; Klasse T3, C1, S1
DIN EN 50155	Klasse T3, C1, S1

Mechanical data

Weight[g] [g]	226
Housing	cylindrical
Dimensions[mm] [mm]	Ø 30 / L = 79.5
Materials	stainless steel (304/1.4301); FKM; EPDM/X; PA
Materials (wetted parts)	stainless steel (303/1.4305); ceramics; FKM
Min. pressure cycles	100 million
Process connection	threaded connection G 1/4 external thread internal thread:M5
Restrictor element integrated	no (can be retrofitted)