B&R X67UM1352
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Other functions |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
| 무게 | 200 kg |
배송 & 재고
X67UM1352은(는) 언제 배송될 수 있나요?
X67UM1352은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
X67UM1352을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — X67UM1352에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 X67UM1352에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
1 strain gauge input with 24-bit resolutionHigh data output rate (10 to 3,750 Hz)Adjustable gain1 high-side output 24 VDC, 0.5 A1 high-side output 24 VDC, 1.0 A This module enables the remote connection of a force gauge using a strain gauge with a converter resolution of up to 24-bit. The data rate can be set from 0.26 ms to 100 ms. This module concept requires compensation in the measurement system. This compensation eliminates the absolute uncertainty in the measurement circuit, such as component tolerances, effective bridge voltage or zero point offset. The measurement precision refers to the absolute (compensated) value, which will only change as a result of changes in the operating temperature. The module is also equipped with 4 digital inputs and 2 digital outputs.
사양
Specifications
| I/O module | 4 digital inputs, 2 digital outputs, 1 input for full-bridge strain gauge |
| B&R ID code | 0x1CDF |
| Status indicators | I/O function per channel, supply voltage, bus function |
| Outputs | Yes, using LED status indicator |
| I/O power supply | M8, 4-pin |
| X2X Link | M12, B-coded |
| Inputs/Outputs | 4x M12, A-coded |
| Internal I/O | 1 W |
| X2X Link power supply | 0.75 W |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA IIA T5 Gc IP67, Ta = 0 - Max. 60°C TÜV 05 ATEX 7201X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| KC | Yes |
| Nominal voltage | 24 VDC |
| Integrated protective function | Reverse polarity protection |
| Sensor power supply | 0.5 A summation current |
| Voltage | 4.5 VDC / max. 60 mA |
| Voltage drop for short-circuit protection at 60 mA | Max. 0.36 VDC |
| Short-circuit proof | Yes |
| Voltage drop for short-circuit protection at 0.5 A | Max. 2 VDC |
| Summation current | Max. 0.5 A |
| Strain gauge factor | ±15.625 to ±125 mV/V, configurable using software |
| Input type | Differential, used to evaluate a full-bridge strain gauge |
| Digital converter resolution | 24-bit |
| Conversion time | Depends on the configured data output rate |
| Data output rate | 10 to 3750 samples per second, configurable using software |
| Cutoff frequency | 50 kHz |
| Order | 1 |
| Slope | 20 dB |
| Operating range / Measurement sensor | 75 to 5000 Ω |
| Influence of cable length | Twisted and shielded conductors, cable length as short as possible, cable routing separate from load circuits, without intermediate terminal to sensor |
| Input protection | RC protection |
| Input current | 450 nA |
| Common-mode range | 0 to 3 VDC Permissible input voltage range (with regard to the electric potential strain gauge GND) on the inputs "Input +" and "Input -" |
| Insulation voltage between input and bus | 500 Veff |
| Gain | 1 to 8, configurable using software |
| Conversion procedure | Sigma-delta |
| Broken bridge supply line | Value approaching 0 |
| Broken sensor line | Value approaching ±final value |
| Valid range of values | 0x7FFF FFFF to 0x8000 0001 |
| Connection | 4-wire connections |
| Short-circuit and overload-proof | Yes |
| 69 mV/V | 36.4 nV |
| 138 mV/V | 72.8 nV |
| 276 mV/V | 146.0 nV |
| 553 mV/V | 251.0 nV |
| Temperature coefficient | 50 ppm/°C |
| Quantity | 2 |
| Input characteristics per EN 61131-2 | Type 1 |
| Input voltage | 24 VDC ±25% |
| Input current at 24 VDC | Typ. 5 mA |
| Input circuit | Sink |
| Hardware | <1 ms |
| Software | - |
| Input resistance | Typ. 4.27 kΩ |
| Low | <5 VDC |
| High | >15 VDC |
| Insulation voltage between channel and bus | 500 Veff |
| Switching voltage | 24 VDC ±25% |
| Output circuit | Source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply |
| Actuator power supply | External |
| Insulation voltage between output and bus | 500 Veff |
| Output 1 | 100 Hz |
| Output 2 | 1 kHz |
| Typical | 15 µs |
| 0 → 1 (90% VOut) | Max. 160 µs |
| 1 → 0 (90% VOut) | Max. 50 µs |
| Electrical isolation | Channel isolated from bus and digital isolated from analog Digital not isolated from I/O power supply |
| Any | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
| Operation | -25 to 60°C |
| Storage | -40 to 85°C |
| Transport | -40 to 85°C |
| Width | 53 mm |
| Height | 85 mm |
| Depth | 42 mm |
| Weight | 200 g |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |
