B&R X20CM4323
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Other functions |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
X20CM4323은(는) 언제 배송될 수 있나요?
X20CM4323은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
X20CM4323을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — X20CM4323에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 X20CM4323에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
4 digital outputsControl of PWM output signals based exactly on NetTime4x oversampling output functionsIntegrated output protection24 VDC and GND for actuator power supply The module has digital outputs for connecting electromechanical loads (e.g. valves and relays) and additional functions such as edge generation.With a resolution down to 125 ns, the module makes it possible to set switching operations at exactly specified moments.The following operating modes can optionally be supplemented with PWM functionality:Direct I/OOversampled I/OEdge generatorEdge generator in toggle operation for output patterns such as digital cam switches (e.g. digital cam switch of function block "ASMcDcsTimedDigitalCamSwitch")Additional functions:PWM modulation of outputs for setting the overexcitation and holding current.Configuration of each channel by specifying PWM period durationControl value for overexcitation current, holding current and overexcitation timePossibility of disabling high-speed cutoff
사양
Specifications
| I/O module | 4 digital outputs for switching electromechanical loads, pulse width modulation |
| B&R ID code | 0xEC21 |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Outputs | Yes, using LED status indicator and software (output error status) |
| Bus | 0.01 W |
| Internal I/O | 1.4 W |
| External I/O | Corresponding to external load |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| Nominal voltage | 24 VDC |
| Nominal output current | 0.75 A |
| Total nominal current | 3 A |
| Connection type | 1-wire connections |
| Output circuit | Sink |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Period duration | 1 ms (1 kHz) or 20 µs (50 kHz) |
| Pulse duration | 0 to 100% |
| Resolution for pulse duration | 1% |
| Inrush current | 1.5 A for max. 25 ms |
| Braking voltage when switching off inductive loads | 27 VDC |
| Reverse polarity protection | No (must be protected externally) |
| Minimum | 18 VDC |
| Nominal | 24 VDC |
| Maximum | 48 VDC |
| External | 24 VDC power supply - maximum current 10 A (melting fuse) |
| Electrical isolation | Bus isolated from channel and internal I/O power supply Channel not isolated from channel and internal I/O power supply |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | 0 to 50°C |
| Vertical mounting orientation | 0 to 40°C |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |
