B&R X20CM4323
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Other functions |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand X20CM4323 peut-il être expédié ?
X20CM4323 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer X20CM4323 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour X20CM4323 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour X20CM4323, selon la disponibilité et la destination.
4 digital outputsControl of PWM output signals based exactly on NetTime4x oversampling output functionsIntegrated output protection24 VDC and GND for actuator power supply The module has digital outputs for connecting electromechanical loads (e.g. valves and relays) and additional functions such as edge generation.With a resolution down to 125 ns, the module makes it possible to set switching operations at exactly specified moments.The following operating modes can optionally be supplemented with PWM functionality:Direct I/OOversampled I/OEdge generatorEdge generator in toggle operation for output patterns such as digital cam switches (e.g. digital cam switch of function block "ASMcDcsTimedDigitalCamSwitch")Additional functions:PWM modulation of outputs for setting the overexcitation and holding current.Configuration of each channel by specifying PWM period durationControl value for overexcitation current, holding current and overexcitation timePossibility of disabling high-speed cutoff
Caractéristiques
Specifications
| I/O module | 4 digital outputs for switching electromechanical loads, pulse width modulation |
| B&R ID code | 0xEC21 |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Outputs | Yes, using LED status indicator and software (output error status) |
| Bus | 0.01 W |
| Internal I/O | 1.4 W |
| External I/O | Corresponding to external load |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| Nominal voltage | 24 VDC |
| Nominal output current | 0.75 A |
| Total nominal current | 3 A |
| Connection type | 1-wire connections |
| Output circuit | Sink |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Period duration | 1 ms (1 kHz) or 20 µs (50 kHz) |
| Pulse duration | 0 to 100% |
| Resolution for pulse duration | 1% |
| Inrush current | 1.5 A for max. 25 ms |
| Braking voltage when switching off inductive loads | 27 VDC |
| Reverse polarity protection | No (must be protected externally) |
| Minimum | 18 VDC |
| Nominal | 24 VDC |
| Maximum | 48 VDC |
| External | 24 VDC power supply - maximum current 10 A (melting fuse) |
| Electrical isolation | Bus isolated from channel and internal I/O power supply Channel not isolated from channel and internal I/O power supply |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | 0 to 50°C |
| Vertical mounting orientation | 0 to 40°C |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |
Plus de pièces B&R
OccasionB&R 5C5001.01 IPC 5000 5D5500.06 Used
OccasionB&R 8BVI0028HWD0.000-1 Used Rev.O0
OccasionB&R 5PC720.1505-K07 - 5P62:0A-03 Used